JWWINCO 40-40-3/8X16-75-A0-S GN40-40-3/8X16-75-A0-S Leveling Feet, Steel, Thread:3/8-16" Stud:2.95"

Information

GN 40 leveling feet are simple, economically priced components.

The static load rating of these feet is limited due to the acceptable load rating of the stud (tensile strength 500/mm²).
The values given in the table assume a straight compressive load, perpendicular to the foot. The bending and buckling stress factors often found in the actual application reduce the load rating of the stud, and must be compensated for accordingly.

To insure proper leveling mount size, divide the machine weight by the number of feet required. This will equal the pounds or load per leveling foot.

Specification

• Type B0 / A0 / A1: Steel, zinc plated, blue passivated finish
• Type D3: Stainless Steel, European Standard No. 1.4301 (AISI 303)
  

• Clipped on
• Black, Santoprene (TPE)
  80 ≈ Shore A hardness
  

• Vulcanised, non-skid
• Black, Perbunan (NBR)
  70 ± Shore A hardness
  

On request