Dixon 500-DD-AL Cam & Groove Type DD Spool Coupler, 5 in size, constructed from 356T6 Aluminum with a Buna-N seal. This spool coupler is designed for use in cam and groove quick disconnect systems, providing a reliable connection between two couplers.

Applications

Designed for use with liquids, consult Dixon for specific recommendations

Construction

Produced as a welded fabrication

How It Works

• To make a connection, simply slide the adapter into the coupler and with normal hand pressure, press the cam levers down.
• Uncoupling is as quick and simple as coupling. Just lift the cam arms and remove the adapter.

Safety Notes

• Under no circumstances should cam and groove couplings be used for compressed air or steam service!
• Pressure rating recommendations are based on the use of mating Dixon fittings at ambient temperature 70°F with a standard seal installed. For use at elevated temperature or other unusual operating conditions, consult Dixon.

Specifications

No standard exists for the 5" fittings, and generally does not interchange with other manufacturers.