Dixon 5040-C-AL Cam & Groove Type C Jump Size Coupler x Hose Shank, 5 in female coupler end and 4 in hose shank end. Cast 356T6 aluminum body with Buna-N seal. Designed for industrial hose connections requiring quick connect and disconnect.

Applications

Designed for use with liquids, consult Dixon for specific recommendations

Available Options

Other gasket types are available, contact Dixon.

Construction

• Nitrile Rubber gasket
• Produced as a welded fabrication
• Supplied with safety clips
• Durable stainless steel cam arm pins
• Durable stainless steel cam arm pins

Features

• Precision machined to rigid tolerances
• Stainless pins will not rust or bind, providing great strength and safety
• Recess holds gasket firmly in place - ensures proper placement
• Long shank design allows proper banding, thus eliminating the major cause of hose damage

How It Works

• To make a connection, simply slide the adapter into the coupler and with normal hand pressure, press the cam levers down.
• Uncoupling is as quick and simple as coupling. Just lift the cam arms and remove the adapter.

Note

In reducing couplings, the cam and groove end is the first size in the part number.

Safety Notes

• Under no circumstances should cam and groove couplings be used for compressed air or steam service!
• Pressure rating recommendations are based on the use of mating Dixon fittings at ambient temperature 70°F (21°C) with a standard seal installed. For use at elevated temperature or other unusual operating conditions, consult Dixon.

Specifications

No standard exists for the 5" fittings, and generally does not interchange with other manufacturers.