Dixon ADS400 Boss-Lock Cam & Groove Type D coupler with 4-inch female NPSM connection, 356T6 aluminum body and Buna-N seal. Safety locking handle prevents accidental disconnection in industrial hose transfer applications.

Applications

Designed for the delivery of dry goods

Available Options

Other gasket types are available, contact Dixon.

Construction

Nitrile Rubber gasket

Features

All Boss-Lock couplers are supplied with pull-safety clips.

How It Works

• To make a connection, simply slide the adapter into the coupler and with normal hand pressure, press the cam levers down.
• Uncoupling is as quick and simple as coupling. Just lift the cam arms and remove the adapter.
• The cast-in lugs allow safety clips to be attached once the lugs are passed through slots in the special cam lever arms providing a positive locking action.
• The pull ring safety clip simplifies the locking action on Boss-Lock couplers. No more inserting clips or dangling lanyards, just a twist and it's locked, giving you a low profile positive locking action.

Safety Notes

• Under no circumstances should cam and groove couplings be used for compressed air or steam service!
• Pressure rating recommendations are based on the use of mating Dixon fittings at ambient temperature 70°F (21°C) with a standard seal installed. For use at elevated temperature or other unusual operating conditions, consult Dixon.

Specifications

Produced to interchange with all product produced to Commercial Item Description A-A-59326D