$56.64 Each Prices subject to change
Image for Illustration purposes only. Actual product may vary
Color (ASTM) = 2, Flash Point 400 F, Hydraulic Oil, Grade (ASTM) 215 Pour Point (deg F)= -30
For dependable performance of cylinders, clamps, valves, and pumps, these high-grade hydraulic fluids contain anti-rust, anti-foam, and anti-sludge additives. They provide maximum film protection lubricity, maximum heat transfer, and a wide operating temperature range.
Hytec's "environmentally friendly" hydraulic fluid is a biodegradable, non-toxic formulation which can withstand severe operating conditions and provide excellent anti-wear properties.
The "Flame-Out" fire resistant fluid has been approved by United States Mine Safety Health Administration under Referral Register Title 30, Part 35. All fire resistant fluids will burn if heat source is extreme, eg.: hot slabs, molten steel, etc. They will not, however, propagate the flame and are selfextinguishing in the absence of an ignition source.
The use of the fire resistant fluid does not require changing the seals in any Hytec equipment as it would when using other types of fire resistant fluids. The standard fluid need only be drained from the complete system and replaced with fire resistant hydraulic fluid.
Mro product supply
Thanks MROSUPPLY, fair prices and good stock, fast shipping and communication. Always the first stop for tooling and supplies.Read more
When you get to checkout, you’ll be able to select a free gift! Depending on the cart value, you’ll be shown relevant gifts your order qualifies for.
MRO Golf Balls
MRO Hi-Vis Vests
32oz Water Bottle
30 piece Hex Set
Telescopic Pick Up
11-in-1 Screw Driver Set
Gorilla Grip Knee Pad
John Deere Oilskin Hat
Igloo 1/2 Gallon Jug
Larix Trucker Hat
Igloo 10 Gallon Cooler
Igloo Party Bucket Cooler
Klein Tools Speaker
Klein Tools 8-in-1
GX-6F Pro Golf Range Finder
Bushnell Outdoorsman Speaker
Jaeger 24px Ratcheting Wrench Set
Aspen Beverage Bucket
Disclaimer: The return policy information shown below is merely a copy of the text as stated in IDC-USA's Annual Return Policy.
ANNUAL RETURN POLICY PURPOSE: The purpose of IDC-USA’s Annual Return Policy is to allow IDC Distributors the opportunity to return salable stock merchandise of current design that may not have adequate “turns” and replace it with faster moving product.
ACCEPTANCE: IDC Owner-Distributors shall submit a return list to IDC-USA with all pertinent information as follows:
a. Product brand name
c. IDC-USA’s product identification number
d. Corresponding distributor’s P.O. number or invoice number Acceptance of return shall be subject to IDC-USA inventory levels and manufacturer’s restrictions.
AUTHORIZATION: The return shall be audited and the IDC Owner-Distributor will receive an approved return list with a Return Material Authorization (RMA) number assigned to it. RETURN DATE: Each owner-distributor shall be assigned a month during which they shall be entitled to make a single annual return.
Product Qualification: All products returned must be:
a. On the current price list
b. In good resale condition
c. In the original packaging
d. Purchased from IDC-USA within 3 years of the return
e. Stock items only; no special order items
f. Only those items which have been approved
VALUE: The IDC Owner-Distributor shall receive a credit not to exceed 5% of the owner-distributor’s prior year annual purchases from the IDC Distribution Center. Credit received shall be the actual purchase price or price in effect at the time of the return, whichever is lowest, less applicable restocking charges. Additionally, all annual returns must have a minimum return value of $100.
RESTOCKING CHARGES: There will be a 15% restocking fee unless return is offset by a noncancelable order of equal value to be placed at the time of return. All items received that are not in their original box shall be subject to an additional 15% repackaging fee.
FREIGHT: Returns will be made freight prepaid by the IDC Owner-Distributor to the IDC Distribution Center. The packing slip and all cartons must reference the RMA number. The owner-distributor will be notified of any items received that do not qualify as set forth above. Those items will not be credited and shall be scrapped unless the IDC Owner-Distributor directs otherwise and assumes any additional transportation charges.