MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
TWHC1 Torque Wrench - High Cycle 3/4" Square Drive
MODEL TWHC1
Contact supplier for technical support on: 800 477 8326
$5,405.40 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Typically Ships in: 1 day
Returnable:No
Bare Tool/Kit
Bare Tool
Control Type
Pushbutton
Drive Size
3/4 in
Drive Type
Square
Height
5.7 in
Length
7.5 in
Series
TWHC
Torque Rating
170 to 1413 lb-ft
Type
High Cycle
Width (in)
2.7
Square Drive Torque Wrench Quality means Lower Cost of Ownership:
- Corrosion resistant material used for use in harsh environments
Enhanced Usability:
- Compact nose radius allows the tool to fit in tighter, hard-to-reach spaces
- Low weight, high strength design
- Fast operation, long stroke and optimum flow
- Multi-direction high flow swivel manifold
- Push button square drive reversal and reaction arm positioning
- Push-button release of square drive & reaction arm for all models except TWHC50.
Designed with Safety in Mind:
- Fully enclosed drive mechanism for operator safety
- Swivel manifold internal relief valve prevents retract side over-pressurization
- Fine tooth pawl prevents tool "lock-on"
Handles Sold Separately
The tool's designed long-stroke mechanism imparts a minimum 30 degree nut rotation per stroke while maintaining a tight and compact nose radius: this is a clear advantage over the short stroke and back-up pawl mechanisms of light alloy competitive models. Fewer parts and reduced torsion in operation - equals reduced wear, maintenance and associated costs.
Specifications
| Designed for high cycle life | 2 to 3x more than existing technology |
|---|---|
| Increased reliability | simple drive assembly means less downtime |
| Order No. | Min Torque | Max Torque | Square Drive | Weight | ||||
|---|---|---|---|---|---|---|---|---|
| lb-ft | Nm | lb-ft | Nm | (in.) | (mm.) | (lbs.) | (kg.) | |
| TWHC1 | 170 | 230 | 1, 413 | 1, 915 | 3/4 | 19, 05 | 6. 2 | 2. 8 |
SKU: 1966869
Mro product supply
Thanks MROSUPPLY, fair prices and good stock, fast shipping and communication. Always the first stop for tooling and supplies.
Read more
#1981195
Brand
Hydraulic Technologies
Model
TWHC6
#1981194
Brand
Hydraulic Technologies
Model
TWHC3
#2971214
Brand
Hydraulic Technologies
Model
TWHC50
| Brand | Rexnord |
| Model | C326-FF |
| Brand | Dodge |
| Model | 107L0388A-FK |
| Brand | SMC |
| Model | KKA3S-02F |
| Brand | Hubbell Wiring |
| Model | HBL60MISRS |
| Brand | Baldor |
| Model | ARB-2 |
| Brand | SMC |
| Model | MHF2-16D1R-M9NWZ |
| Brand | Phase-A-Matic |
| Model | CNC PAC-30 |
| Brand | Coilhose |
| Model | A627-BL |
SKU: 1966869
Mro product supply
Thanks MROSUPPLY, fair prices and good stock, fast shipping and communication. Always the first stop for tooling and supplies.
Read moreDisclaimer: The return policy information shown below is merely a copy of the text as stated in IDC-USA's Annual Return Policy.
File: http://documents.mrosupply.com/file_uploads/IDCreturnpolicy.pdf
ANNUAL RETURN POLICY PURPOSE: The purpose of IDC-USA’s Annual Return Policy is to allow IDC Distributors the opportunity to return salable stock merchandise of current design that may not have adequate “turns” and replace it with faster moving product.
ACCEPTANCE: IDC Owner-Distributors shall submit a return list to IDC-USA with all pertinent information as follows:
a. Product brand name
b. Quantity
c. IDC-USA’s product identification number
d. Corresponding distributor’s P.O. number or invoice number Acceptance of return shall be subject to IDC-USA inventory levels and manufacturer’s restrictions.
AUTHORIZATION: The return shall be audited and the IDC Owner-Distributor will receive an approved return list with a Return Material Authorization (RMA) number assigned to it. RETURN DATE: Each owner-distributor shall be assigned a month during which they shall be entitled to make a single annual return.
Product Qualification: All products returned must be:
a. On the current price list
b. In good resale condition
c. In the original packaging
d. Purchased from IDC-USA within 3 years of the return
e. Stock items only; no special order items
f. Only those items which have been approved
VALUE: The IDC Owner-Distributor shall receive a credit not to exceed 5% of the owner-distributor’s prior year annual purchases from the IDC Distribution Center. Credit received shall be the actual purchase price or price in effect at the time of the return, whichever is lowest, less applicable restocking charges. Additionally, all annual returns must have a minimum return value of $100.
RESTOCKING CHARGES: There will be a 15% restocking fee unless return is offset by a noncancelable order of equal value to be placed at the time of return. All items received that are not in their original box shall be subject to an additional 15% repackaging fee.
FREIGHT: Returns will be made freight prepaid by the IDC Owner-Distributor to the IDC Distribution Center. The packing slip and all cartons must reference the RMA number. The owner-distributor will be notified of any items received that do not qualify as set forth above. Those items will not be credited and shall be scrapped unless the IDC Owner-Distributor directs otherwise and assumes any additional transportation charges.