MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
Taylor Pneumatic T-7182A Weld Flux Scaler IR Style Chisel 4000 Bpm Weld Flux Scaler IR Style Chisel 4000 Bpm
MODEL T-7182A
Contact supplier for technical support on: 800-805-8665
$301.22 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Typically Ships in: 1 day
Returnable:No
Air Cons at Load
8
Air Inlet
1/4" NPT
Air Inlet NPT (in)
1/4
Blows per Minute
4000
Chisel Style
IR style
Length (in)
8.5
Max Air Pressure (psi)
90
Weight (lb)
3.8
Specifications
| T-7182 | T-7182A | |
|---|---|---|
| Strokes per min. | 4,000 | 4,000 |
| Stroke | 7/8" | 7/8" |
| # of needles | 19 | N/A |
| Needle diameter | 3 mm | N/A |
| Length | 16 3/8" | 8 1/2" |
| Weight | 6 lbs. | 3.8 lbs |
| Air Pressure | 90 PSI Max. | 90 PSI Max. |
| Air Inlet | 1/4" NPT | 1/4" NPT |
- Precision machined and hardened parts
- Lever throttle
- All steel construction
- Needles adjust to contours of the work
- Ball retainer
The T-7182 can be changed into a weld flux scaler by simple removing the scaler tube and mushroom chisel and inserting a scraper blade or punch. Changing chisels is easy, a twist of the chisel retainer releases the steel ball holding the chisel and chisels may then slide in or out. Uses IR style chisels. T-7182 is Needle Scaler. T-7182A is Weld Flux Scaler (comes with 1 1/4" angle scraper T-7601AH9)
SKU: 2306820
T-7781 palm hammer
I purchased the Taylor T-7781 Palm Hammer and received it in a timely manner and without damage. The packaging was robust and secure and included a nice catalog of the many other tools available. The palm hammer is made in Taiwan and appears to be well-made and of good quality. It came with the rubber pad installed which I swapped out for the hardened steel pad since I am using it for doing some panel beating in my project car. I have not used it extensively but so far it has performed very well with no hiccups. I also appreciated the website - very professional and simple to use plus I could track delivery. Based on my experience so far, I would definitely recommend this supplier for future tool purchases.
Read more
| Brand | Dodge |
| Model | 455308 |
| Brand | Browning |
| Model | 1065812 |
| Brand | Tingley |
| Model | V70649-4X/5X |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-461617 |
| Brand | Lubriplate |
| Model | L0772-060 |
| Brand | Wiegmann |
| Model | RSCG121236 |
| Brand | Dichtomatik |
| Model | A42-145X157X7 |
| Brand | Taylor Pneumatic |
| Model | T-8759R |
SKU: 2306820
T-7781 palm hammer
I purchased the Taylor T-7781 Palm Hammer and received it in a timely manner and without damage. The packaging was robust and secure and included a nice catalog of the many other tools available. The palm hammer is made in Taiwan and appears to be well-made and of good quality. It came with the rubber pad installed which I swapped out for the hardened steel pad since I am using it for doing some panel beating in my project car. I have not used it extensively but so far it has performed very well with no hiccups. I also appreciated the website - very professional and simple to use plus I could track delivery. Based on my experience so far, I would definitely recommend this supplier for future tool purchases.
Read more