MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
Taylor Pneumatic T-9890 Super Duty 90 Degree 5/16-24 Threaded Aircraft Drill Motor 1/4" Collet Super Duty 90 Degree 5/16-24 Threaded Aircraft Drill Motor 1/4" Collet
MODEL T-9890
Contact supplier for technical support on: 800-805-8665
$583.46 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
Air Cons at Load
5
Air Inlet
1/4" NPT
Air Inlet NPT (in)
1/4
Collet (in)
1/4
HP
0.6
Length (in)
9.75
Max Air Pressure (psi)
90
Max Pressure
90
RPM
3,000
Thread Size (in)
5/16-24 threaded
Weight (lb)
2.1
Specifications
T-9750-C 1/8” Drill Chuck, Key and Adapter - Fits any 1/4-28 threaded spindle with the use of our adapter from tapered shaft (inside chuck) to 1/4-28 thread.
- Optional
- 755338 3” Pad PSA
- 755338V 3” Pad Velcro
- 755344 3-1/2” Polishing Pad
| Model | RPM | Thread size | HP | Length | Weight | Air Inlet | Air Pressure |
|---|---|---|---|---|---|---|---|
| T-9850 | 3,000 | 1/4-28 | .6 | 9.75” | 2.10 lbs | 1/4”NPT | 90 PSI max. |
| T-9870 | 3,000 | 1/4-28 | .6 | 9.75” | 2.10 lbs | 1/4”NPT | 90 PSI max. |
| T-9890 | 3,000 | 5/16-24 | .6 | 9.75” | 2.10 lbs | 1/4”NPT | 90 PSI max. |
SKU: 2306820
T-7781 palm hammer
I purchased the Taylor T-7781 Palm Hammer and received it in a timely manner and without damage. The packaging was robust and secure and included a nice catalog of the many other tools available. The palm hammer is made in Taiwan and appears to be well-made and of good quality. It came with the rubber pad installed which I swapped out for the hardened steel pad since I am using it for doing some panel beating in my project car. I have not used it extensively but so far it has performed very well with no hiccups. I also appreciated the website - very professional and simple to use plus I could track delivery. Based on my experience so far, I would definitely recommend this supplier for future tool purchases.
Read more
| Brand | MROSupply Fasteners |
| Model | FSTPCK-815183 |
| Brand | Linn Gear |
| Model | 40AR60 |
| Brand | Enerpac |
| Model | BSH7538 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-494074 |
| Brand | Fenner Industrial Motion |
| Model | 5800350 |
| Brand | Consolidated Bearings |
| Model | CBMS-9-2RSP |
| Brand | Dichtomatik |
| Model | 75171835 |
| Brand | Schunk |
| Model | 1380936 |
SKU: 2306820
T-7781 palm hammer
I purchased the Taylor T-7781 Palm Hammer and received it in a timely manner and without damage. The packaging was robust and secure and included a nice catalog of the many other tools available. The palm hammer is made in Taiwan and appears to be well-made and of good quality. It came with the rubber pad installed which I swapped out for the hardened steel pad since I am using it for doing some panel beating in my project car. I have not used it extensively but so far it has performed very well with no hiccups. I also appreciated the website - very professional and simple to use plus I could track delivery. Based on my experience so far, I would definitely recommend this supplier for future tool purchases.
Read more