MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
Dixon D4S4 DF-Series Pneumatic Standard Hose Barb Plug
MODEL D4S4
This vendor has a minimum order quantity of 10. Order minimum ($) may be applied. Add desired QTY to cart and proceed to checkout to view minimum
Contact supplier for technical support on: 8779634966
$6.40 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Brand Minimum Order Quantity: 10
Typically Ships in: 1 day
Returnable: See conditions
California Prop 65 warningBody Size
1/2 in
Hose I.D.
1/2 in
Length
2.53 in (64.3 mm)
Material
Steel
Max OD
0.75 in (19.1 mm)
Pressure Rating
See Product Details
Temperature range
-40F to 250F (-40C to 121C)
Compatibility & Interchange Data
- Foster 3, 4, 5 and 6 Series
- Parker 30 - Series Automatic Interchange & Parker 20-Series Manual Interchange
- Hansen 3000, 4000, 5000 and 6000 & Hansen 1000, 400 and 500
Construction
- Machined components are manufactured using solid bar stock.
- Steel componentry is plated using ROHS Compliant Trivalent Chrome.
How It Works
- To disconnect, begin by holding the hose on the nipple side with three of your fingers, leaving your thumb and index finger free.
- Grab the sleeve with your thumb and index finger and begin to pull the sleeve towards the palm of your hand.
- After pulling the sleeve, the nipple will move out of the coupler slightly. Continue to hold the hose and coupler sleeve until all air is fully exhausted.
- After the line is fully exhausted, you are able to safely separate the nipple from the coupler.
Safety Notes
- It is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18" long, between the tool and the coupling, to prevent damage to the coupling. To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure.
- Operating pressure for couplings utilizing hose barb connections may be dramatically reduced to that of the hose rating and/or hose end connection combination. Consult hose manufacturer's catalog for hose end connection ratings. If in doubt, test under controlled conditions for suitability to application.
- Dixon cannot assume liability for misapplication of production resulting in equipment down-time, lost production, and/or personal injury including death.
Specifications
- Rated pressure when connected with Brass D-Series Automatic Couplers: 500 PSI (35 bar) Maximum Working and 14,000 PSI (965 bar) Burst
- Rated pressure when connected with Steel F-Series Manual Couplers: 500 PSI (35 bar) Maximum Working and 15,500 PSI (1,070 bar) Burst
#2933277
Brand
Dixon
Model
3FB4
#2934446
Brand
Dixon
Model
D4S4
#2932949
Brand
Dixon
Model
2FS2-B
#2933265
Brand
Dixon
Model
3DS2-B
#2932953
Brand
Dixon
Model
2FS3-S
| Brand | Dixon |
| Model | CCF1438 |
| Brand | Hubbell Wiring |
| Model | HBL4100P5W |
| Brand | Union Butterfield |
| Model | 47047/32X5/32 |
| Brand | Champion |
| Model | CM95X-1/2X16X18 |
| Brand | Bando |
| Model | 3L650 |
| Brand | WEG |
| Model | RW27-2D2-D012 |
| Brand | Dichtomatik |
| Model | 75089523 |
| Brand | Dixon |
| Model | CF300-14CS |
