We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Hubbell Wiring WS1001W VAC SENSORPIR120V 500WWH
MODEL WS1001W
This vendor has a minimum order quantity of 7. Order minimum ($) may be applied. Add desired QTY to cart and proceed to checkout to view minimum
Contact supplier for technical support on: jruvalcaba@hubbell.c
$69.71 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Brand Minimum Order Quantity: 7
Typically Ships in: 1 day
Returnable: See conditions
Application
Compatible with most LED and CFL
Color
White
Dimensions
4.15 in x 1.82 in x 1.62 in
Height
1.62 in
Humidity
20% to 90% non-condensing relative humidity
Indicator(s) type
PIR= Red LED
Industry Standard(s)
cULus Listed To UL773A
Item type
Passive Infrared Wall Switches
Length
4.15 in
Material
ABS (Acrylonitrile butance styrene - Thermoplastic polymer)
Mounting Height
3.5-4.5 ft
Operating temperature
32F to 122F (0C to 50C) with rate of change not exceeding 20F(11C) per hour
Photocell
Yes
Series
Passive Infrared
Storage temperature range
-40F to 150F (-40C to 65C)
Type
Manual
Voltage
120 VAC
Voltage rating description
120V AC
Width (in)
1.82
Hubbell Wiring Device-Kellems WS1001W
UPC: 783585256252 | UNSPSC: 39122236 | GTIN: 00783585256252
Lighting Controls & Ballasts > Occupancy & Vacancy Sensors > Wall Mount Vacancy Sensors
Wiring Device-Kellems H-MOSS tradeSELECT Vacancy Sensor Switch, 2-Circuit Adjustable Standard, Series: WS1000, 120 VAC, 5 A, 600 W, Passive Infrared Sensor, 1200 sq-ft Coverage, 6 s to 20 min Delay, Incandescent Lamp, 60 Hz Response, Screw, Manual ON Control Output, Threaded/Wall Mount, 32 to 104 deg F, ABS, White, 4.15 in L x 1.82 in W x 1.62 in H
Features:
- No neutral required, fast retrofits
- Tamper resistant lens
- Flame retardant UL 94 V-0 ABS
- Manual adjusting, manual ON operation
Specs:
| Series | WS1000 |
|---|---|
| Type | 2-Circuit Adjustable Standard |
| Color | White |
| Material | ABS |
| Dimensions | 4.15 in L x 1.82 in W x 1.62 in H |
| Coverage | 1200 sq-ft |
| Voltage Rating | 120 VAC |
| Amperage Rating | 5 A |
| Power Rating | 600 W |
| Mounting Type | Threaded/Wall |
| Connection Type | Screw |
| Lamp Type | Incandescent |
| Temperature Rating | 32 to 104 deg F |
| Time Delay | 6 s to 20 min |
| Sensor Type | Passive Infrared |
| Control Output | Manual ON |
| Response Frequency | 60 Hz |
Packaging:
| Length | 4.9 in |
|---|---|
| Width | 2.3 in |
| Height | 10.1 in |
| Weight | 0.25 lb |
Certifications/Standards:
cULus Listed | UL 773A | CSA Certified
SKU: 5018609
Thank you for carrying hubble and wiremold
With Hubble I am able to meet UL a smaller conduit for four #6 THHN wires than if I used Wiremold. The Hubble version is hard to obtain because Wiremold dominates this sector.
Read moreSKU: 5020985
Hubble floor socket
Nice low profile. Access door is tight...needs a small tool to open. Installation was easy
Read moreSKU: 1100550
Not bad
Unfortunately the mounting holes for this receptacle did not match the Arlington DBVS2C-1 Low Profile IN BOX Electrical Box. Otherwise it is a nice product.
Read more
#5022137
Brand
Hubbell Wiring
Model
WS1021LA
#5022119
Brand
Hubbell Wiring
Model
WS1000LA
#5022125
Brand
Hubbell Wiring
Model
WS1001NW
#5806125
Brand
Hubbell Wiring
Model
WS1001NLA
#5022140
Brand
Hubbell Wiring
Model
WS1021NLA
| Brand | Gates Rubber |
| Model | 5V1600 |
| Brand | Bestorq |
| Model | 6/8VX1250 |
| Brand | RAB Lighting |
| Model | PLC-9-H-835-BYP |
| Brand | StrongHold |
| Model | WB-15313 |
| Brand | Cortina |
| Model | 07-800-4107 |
| Brand | Grundfos |
| Model | 96402715 |
| Brand | Fenner Industrial Motion |
| Model | L04C8595 |
SKU: 5018609
Thank you for carrying hubble and wiremold
With Hubble I am able to meet UL a smaller conduit for four #6 THHN wires than if I used Wiremold. The Hubble version is hard to obtain because Wiremold dominates this sector.
Read moreSKU: 5020985
Hubble floor socket
Nice low profile. Access door is tight...needs a small tool to open. Installation was easy
Read moreSKU: 1100550
Not bad
Unfortunately the mounting holes for this receptacle did not match the Arlington DBVS2C-1 Low Profile IN BOX Electrical Box. Otherwise it is a nice product.
Read moreItem must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/