KIPP K0338.14903 INDEXING PLUNGER SIZE:9 D1=M06X075 D=3 FORM:D WITH LOCKING SLOT WITH LOCKNUT STAINLESS STEEL NOT HARDENED

Product description:

Indexing plungers are used where it is necessary to prevent changes of position due to lateral forces.
Some examples of this are for length, height and position indexing in machines, equipment, furniture and special vehicle construction.

A new indexed position can be only be moved to after the pin has been manually retracted. style C and D are recommended for applications where the indexing pin should remain disengaged for an extended period and be prevented from springing back.

The materials used enable diverse applications including those with the highest demands on corrosion resistance

Material:

Steel version:
Threaded sleeve and indexing pin free-cutting steel.
Spring 1.4310 (AISI 301 equivalent).

Stainless steel version A2:
Threaded sleeve 1.4305 (AISI 303 equivalent).
Hardened indexing pin 1.4034(AISI 420 equivalent).
Not hardened indexing pin 1.4305 (AISI 303 equivalent).
Spring 1.4310 (AISI 301 equivalent).

Stainless steel version A4:
Threaded sleeve and indexing pin 1.4404 (AISI 316L equivalent).
Spring 1.4401 (AISI 316 equivalent) or 1.4571 (AISI 316 Ti equivalent).

Mushroom grip thermoplastic, dark gray or traffic red RAL3020.

Version:

Steel version:
Threaded sleeve, black oxidized.
Indexing pin hardened, ground and black oxidized.

Stainless steel A2 version:
threaded sleeve bright.
Indexing pin hardened or not hardened, ground and bright.

Stainless steel A4 version:
threaded sleeve bright.
Indexing pin ground, chemically nickel-plated or bright.

On request:

Special versions.

Accessory:

Spacer rings K0665