MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
JET 181205 JLH-25-5 JLH Series 1/4 Ton Lever Hoist 5' Lift
MODEL 181205
This vendor has a minimum order quantity of 13. Order minimum ($) may be applied. Add desired QTY to cart and proceed to checkout to view minimum
Contact supplier for technical support on: 833 383 6800
$251.99 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Brand Minimum Order Quantity: 13
Typically Ships in: 1 day
Returnable: Yes
Capacity (Lbs.)
500
Force Required to Move Maximum Load (Lbs)
45
Height
3.35 in
Length
8.07 in
Lift (Ft.)
5
Load Capacity (Tons)
1/4
Load Chain Dimensions dia/mm)
3.2 x 9
Weight (Lbs.)
3.5
Width
4.13 in
JET Lever Chain Hoist, Series: JLH, 0.25 ton, 5 ft Lifting Height, 1.4 in Minimum Between Hooks, 0.83 in Hook Opening, 45 lb Pull to Lift, 5-3/4 in Lever Length, Grade 80 Alloy Chain, Dual Pawl Weston Brake
Features
- Weston style dual pawl brake system dual pawl design increases safety by splitting the load to opposite sides of the ratchet gear for greater load security
- Alloy steel hooks industrial rated hooks rotate 360 degrees for easy rigging, hooks slowly stretch to indicate an overload situation increasing jobsite safety
- Safety and durability
- Heat treated load plates- heat treated for durability, these extend the life of the hoist in industrial environments
- Grade 80 load chain grade 80 black oxide coated load chain for durability
- All steel construction with impact resistant covers that provide durability and protection
- Work to weight ratio- at 3.5 pounds, the 1/4 ton JLH compact lever hoist can pull or hold a load more than 140 times its weight
- Compact power- a 1/4 ton of pulling power that fits in the palm of your hand
- Geared drive train- JET's exclusive five gear drive train requires less force to lift or secure a load
- Durable, impact resistant, aluminum alloy housings makes the JLH compact lever hoist one of the lightest hoists on the market
- Load tested to 125% of capacity with certificate
- 1 falls
- 3/7 in lift per turn
- 7-9/10 in headroom
- 3.2 x 9 mm load chain
- No overload protection
- Cast steel safety latches increased durability with heavy duty safety latches secured with Allen screws and lock nuts, compact design- smaller body and lightweight design for low headroom applications and use in confined areas
- 3.43 in overall length
Standards: ANSI/ASME B30.21 and HST-3 Standards|OSHA regulations
Application: For heavy-duty industrial applications
SKU: 6106466
Rating of purchase of jet drum sander
First, the bad part. It took months to get this machine. As the estimated shipment date drew near, it was pushed be a week. Disappointment! However, I understand the supply chain issues under the current administration and do not fault the company. From the date of shipment notification, the lapse time was approximately 3 days. It arrived in a crate and was well packed within. On the fourth day it was assembled and put into use. This drum sander functions great. It is a replacement for a Delta drum sander I had prrchased 20 years ago. It was destroyed by movers when we moved to TX. Originally, I purchased another Delta sander, however, when it arrived I discovered that it basically had no warranty It went back. This sander is well made and I expect will last another 20 years. Whenever I contacted MRO with a question, they were courteous and prompt in providing me with the answer. I would definitely consider future purchases with them.
Read more
| Brand | Martin Sprocket |
| Model | 4 B 124 TB |
| Brand | Superlok |
| Model | S1FCI-6-6N |
| Brand | Durham |
| Model | MT244836-3K295 |
| Brand | Jason Industrial |
| Model | D390L150 |
| Brand | Reiff & Nestor |
| Model | 28607 |
| Brand | Gates Rubber |
| Model | TP600L100 |
| Brand | M.K. Morse |
| Model | ZWEP4418WB |
| Brand | Dixon |
| Model | WS10F10-SS-BOP |
SKU: 6106466
Rating of purchase of jet drum sander
First, the bad part. It took months to get this machine. As the estimated shipment date drew near, it was pushed be a week. Disappointment! However, I understand the supply chain issues under the current administration and do not fault the company. From the date of shipment notification, the lapse time was approximately 3 days. It arrived in a crate and was well packed within. On the fourth day it was assembled and put into use. This drum sander functions great. It is a replacement for a Delta drum sander I had prrchased 20 years ago. It was destroyed by movers when we moved to TX. Originally, I purchased another Delta sander, however, when it arrived I discovered that it basically had no warranty It went back. This sander is well made and I expect will last another 20 years. Whenever I contacted MRO with a question, they were courteous and prompt in providing me with the answer. I would definitely consider future purchases with them.
Read more