Image for Illustration purposes only. Actual product may vary
EM3770T-8 7.5HP, 1770RPM, 3PH, 60HZ, 213T, 0735M, TEFC
MODEL EM3770T-8
Contact supplier for technical support on: 479-646-4711
$1,605.10 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Free Gift with this product
Typically Ships in: 1 day
Returnable: See conditions
Still Deciding?
Add this item to your saved items and easily come back later.
Hz
60
Frame
213T
HP
7.5
Voltage
200
Phase
3
RPM
1700 - 1800
Enclosure
TEFC
| Output | 7. 5 |
|---|---|
| RPM | 1770 |
| Pallet Quantity | 6 |
| Specification Number | 07H002X497 |
| Frame | 213T |
| Weight | 170. 000 LB |
| Multiplier | L1 |
| Enclosure | TEFC |
| Item Type | MOTOR |
| Manufacturing Plant | FT SMITH |
| Voltage | 200 |
| Poles | 04 |
| Class | STOCK |
| Type | 0735M |
| Status | Active |
| Commodity Code | 8501. 52. 4000 |
| Origin | US |
| Explosion Proof Class/Group | NONE |
| Revision | H |
|---|---|
| Status | PRD/A |
| Change # | 783705 |
| Proprietary | No |
| Type | AC |
| Prod. Type | 0735M |
| Elec. Spec | 07WGX497 |
| CD Diagram | CD0006 |
| Enclosure | TEFC |
| Manufacturing Plant | FT SMITH |
| Mech. Spec | 07H002 |
| Layout | 07LYH002 |
| Frame | 213T |
| Mounting | F1 |
| Poles | 04 |
| Created Date | |
| Base | RG |
| Rotation | R |
| Insulation | F |
| Eff. Date | 2/1/2013 |
| Leads | 3#12 |
| Literature | |
| Elec. Diagram | |
| Replaced By |
Specification History for EM3770T-8
| Active | Specification Number | Plant | Date | Description |
|---|---|---|---|---|
| 07H002X497 | BALDOR/FT SMITH/REC WHSE #5 | 3/14/2006 | 35M 4P TEFC HOR 213T SUPER-E | |
| 07H002W783G1 | BALDOR/FT SMITH/REC WHSE #5 | 8/2/2005 | 40M 4P TEFC HOR 213T SUPER-E | |
| 07H002W783G1 | BALDOR/FT SMITH/REC WHSE #5 | 8/10/1999 | 40M 4P TEFC HOR 213T SUPER-E | |
| 07H002W783G1 | BALDOR/FT SMITH/REC WHSE #5 | 6/9/1999 | 40M 4P TEFC HOR 213T SUPER-E |
| Nameplate No. | NP1259L |
|---|---|
| CAT. NO. | EM3770T-8 |
| SPEC. | 07H002X497 |
| HP | 7. 5 |
| VOLTS | 200 |
| AMP | 21. 4 |
| RPM | 1770 |
| FRAME | 213T |
| HZ | 60 |
| PH | 3 |
| SER. F. | 1. 15 |
| CODE | J |
| DES | A |
| CL | F |
| NEMA-NOM-EFF | 91. 7 |
| PF | 81 |
| RATING | 40C AMB-CONT |
| CC | 010A |
| USABLE AT 208V | 21. 2 |
| DE | 6307 |
| ODE | 6206 |
| ENCL | TEFC |
| SN | |
General Characteristics
| Full Load Torque | 22. 1 LB-FT |
|---|---|
| Start Configuration | DOL |
| No-Load Current | 8. 81 Amps |
| Break-Down Torque | 65. 8 LB-FT |
| Line-line Res. @ 25°C. | 0. 295 Ohms A Ph / 0 Ohms B Ph |
| Pull-Up Torque | 32. 2 LB-FT |
| Temp. Rise @ Rated Load | 43°C |
| Locked-Rotor Torque | 39. 7 LB-FT |
| Temp. Rise @ S. F. Load | 53°C |
| Starting Current | 148 Amps |
Load Characteristics
| % of Rated Load | 25 | 50 | 75 | 100 | 125 | 150 | S. F. |
|---|---|---|---|---|---|---|---|
| Power Factor | 46 | 68 | 78 | 82 | 84 | 84 | 83 |
| Efficiency | 87. 2 | 91. 5 | 92. 1 | 91. 8 | 91 | 89. 9 | 91. 3 |
| Speed (RPM) | 1792 | 1783 | 1776 | 1768 | 1758 | 1747 | 1762 |
| Line Amperes | 10 | 13 | 16. 8 | 21. 3 | 26. 4 | 31. 8 | 24. 4 |
Parts for current product
| Product Number | Description | Quantity |
|---|---|---|
| SA126209 | SA 07H002X497 | 1 EA |
| RA116525 | RA 07H002X497 | 1 EA |
| 37FN3002C01 | EXFN, PLASTIC, 6. 00 OD, 1. 155 ID | 1 EA |
| S/P107-000-001 | SUPER E PROC'S-FS & WS PLTS-POLYREX EM G | 1 EA |
| HW3201A05 | 3/8-16 EYEBOLT | 1 EA |
| 09CB3002SP | CB W/1. 38 LEAD HOLE FOR 37, 39, 307 & 30 | 1 EA |
| 09GS1000SP | GASKET-CONDUIT BOX, 1/16 THICK LEXIDE | 1 EA |
| 51XW2520A12 | . 25-20 X. 75, TAPTITE II, HEX WSHR SLTD | 2 EA |
| WD1000B17 | KPA-8C BURNDY TERMINAL | 1 EA |
| 11XW1032G06 | 10-32 X. 38, TAPTITE II, HEX WSHR SLTD U | 1 EA |
| HW3001B01 | 003SS CUP WASHER, FOR #8 SCREW | 1 EA |
| 37EP1100A41 | FR ENDPLATE MACH FOR GREASER & RELIEF | 1 EA |
| HW4500A17 | 317400 ALEMITE GREASE RELIEF | 1 EA |
| HW4500A01 | 1641B(ALEMITE)400 UNIV, GREASE FITT | 1 EA |
| HW5100A06 | W2420-025 WVY WSHR (WB) | 1 EA |
| 37EP1101A22 | PU ENDPLATE, MACH | 1 EA |
| HW4500A17 | 317400 ALEMITE GREASE RELIEF | 1 EA |
| HW4500A01 | 1641B(ALEMITE)400 UNIV, GREASE FITT | 1 EA |
| XY3118A12 | 5/16-18 HEX NUT DIRECTIONAL SERRATION | 4 EA |
| 07FH4007SP | IEC FH W/GRSR, NOTCH @ 6: 00 & 3 FAN CVR | 1 EA |
| 51XW1032A06 | 10-32 X. 38, TAPTITE II, HEX WSHR SLTD S | 3 EA |
| 09CB3501SP | CONDUIT BOX LID FOR 09CB3001 & 09CB3002 | 1 EA |
| 09GS1013SP | 09 GS FOR 09CB3501 LID - LEXIDE | 1 EA |
| 51XW2520A12 | . 25-20 X. 75, TAPTITE II, HEX WSHR SLTD | 2 EA |
| HW2501F21 | KEY, 5/16 SQ X 2. 375 | 1 EA |
| HA7000A02 | KEY RETAINER RING, 1 1/8 DIA, 1 3/8 DIA | 1 EA |
| LB1115 | LABEL, LIFTING DEVICE | 1 EA |
| 85XU0407S04 | 4X1/4 U DRIVE PIN STAINLESS | 2 EA |
| MJ1000A75 | GREASE, POLYREX EM EXXON | 0. 05 LB |
| HA3104A32 | THRUBOLT- 5/16-18 X12. 750 | 4 EA |
| 51XB1214A20 | 12-14X1. 25 HXWSSLD SERTYB | 1 EA |
| MG1000Y03 | WILKO 689. 710 GOLD PAINT SUPER E | 0. 036 GA |
| LB1119 | WARNING LABEL | 1 EA |
| LB1125C02 | SUPER-E (STOCK CTN LABEL SUPER-E WITH FL | 1 EA |
| LC0006 | CONNECTION LABEL | 1 EA |
| NP1259L | ALUM SUPER-E UL CSA-EEV CC NEMA PREMIUM | 1 EA |
| 07PA1011 | PKG GRP, 07 CAST IRON PK1181 | 1 EA |
| LB1506 | LABEL 'AMERICAN MADE' 1. 50 X 1. 00 | 1 EA |
Accesories
| Product Number | Description | Multiplier | |
|---|---|---|---|
| 37-1304 | C FACE KIT | A8 |
#24488
Brand
Baldor
Model
EM3770T-5
#2548763
Brand
Baldor
Model
EM3770T-8G
#24489
Brand
Baldor
Model
EM3770T-8
#24487
Brand
Baldor
Model
EM3770T
When you get to checkout, you’ll be able to select a free gift! Depending on the cart value, you’ll be shown relevant gifts your order qualifies for.
$500
MRO Hat
MRO Golf Balls
MRO Hi-Vis Vests
MRO Mug
$750
32oz Water Bottle
Throw Blanket
30 piece Hex Set
Telescopic Pick Up
$1,250
Golf Cooler
11-in-1 Screw Driver Set
Gorilla Grip Knee Pad
John Deere Oilskin Hat
$2,500
Igloo 1/2 Gallon Jug
Rechargable Headlamp
Larix Trucker Hat
$5,000
Igloo 10 Gallon Cooler
Igloo Party Bucket Cooler
Klein Tools Speaker
Klein Tools 8-in-1
$7,500
GX-6F Pro Golf Range Finder
Bushnell Outdoorsman Speaker
Jaeger 24px Ratcheting Wrench Set
Aspen Beverage Bucket
Item must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/