Image for Illustration purposes only. Actual product may vary
AEM4104-4 30HP, 1775RPM, 3PH, 60HZ, 326U, 1250M, TEFC, F1
MODEL AEM4104-4
Contact supplier for technical support on: 479-646-4711
$10,338.84 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Typically Ships in: 1 day
Returnable: See conditions
Still Deciding?
Add this item to your saved items and easily come back later.
Hz
60
Frame
326U
HP
30
Voltage
460
Phase
3
RPM
1700 - 1800
Enclosure
TEFC
| Output | 30 |
|---|---|
| RPM | 1775 |
| Pallet Quantity | 2 |
| Specification Number | 12H079X202G1 |
| Frame | 326U |
| Weight | 559. 000 LB |
| Multiplier | L1 |
| Enclosure | TEFC |
| Item Type | MOTOR |
| Manufacturing Plant | COLUMBUS |
| Voltage | 460 |
| Poles | 04 |
| Class | STOCK |
| Type | 1250M |
| Status | Active |
| Commodity Code | 8501. 52. 8040 |
| Origin | US |
| Explosion Proof Class/Group | NONE |
| Revision | P |
|---|---|
| Status | PRD/A |
| Change # | 764732 |
| Proprietary | No |
| Type | AC |
| Prod. Type | 1250M |
| Elec. Spec | 12WGX202 |
| CD Diagram | CD0006 |
| Enclosure | TEFC |
| Manufacturing Plant | COLUMBUS |
| Mech. Spec | 12H79 |
| Layout | 12LYH079 |
| Frame | 326U |
| Mounting | F1 |
| Poles | 04 |
| Created Date | |
| Base | RG |
| Rotation | R |
| Insulation | F |
| Eff. Date | 9/17/2012 |
| Leads | 3#8 |
| Literature | |
| Elec. Diagram | |
| Replaced By |
Specification History for AEM4104-4
| Active | Specification Number | Plant | Date | Description |
|---|---|---|---|---|
| 12H079X202G1 | BALDOR/COLUMBUS | 4/18/2000 | 50M 4P TEFC HOR 326U | |
| 12J87W327 | BALDOR/COLUMBUS | 8/10/1999 | 50M 4P TEFC HOR 326U | |
| 12J87W327 | BALDOR/COLUMBUS | 6/17/1999 | 50M 4P TEFC HOR 326U |
| Nameplate No. | NP1404E |
|---|---|
| CAT. NO. | AEM4104-4 |
| SPEC. | 12H079X202G1 |
| VOLTS | 460 |
| AMP | 35 |
| RPM | 1775 |
| HP | 30 |
| FRAME | 326U |
| HZ | 60 |
| PH | 3 |
| SER. F. | 1. 00 |
| CODE | G |
| DES | B |
| CL | F |
| NEMA-NOM-EFF | 93. 6 |
| PF | 86 |
| G. MIN. EFF | 92. 4 |
| CC | |
| RATING | 65C AMB-CONT |
| LUBRICATION | POLYREX EM |
| DE | 6312 |
| ODE | 6311 |
| ENCL | TEFC |
| SER. # | |
| MEETS GM-7EHQ |
General Characteristics
| Full Load Torque | 89 LB-FT |
|---|---|
| Start Configuration | DOL |
| No-Load Current | 11. 2 Amps |
| Break-Down Torque | 256 LB-FT |
| Line-line Res. @ 25°C. | 0. 217 Ohms A Ph / 0 Ohms B Ph |
| Pull-Up Torque | 104 LB-FT |
| Temp. Rise @ Rated Load | 54°C |
| Locked-Rotor Torque | 140 LB-FT |
| Temp. Rise @ S. F. Load | |
| Starting Current | 218 Amps |
Load Characteristics
| % of Rated Load | 25 | 50 | 75 | 100 | 125 | 150 | S. F. |
|---|---|---|---|---|---|---|---|
| Power Factor | 57 | 77 | 84 | 86 | 87 | 86 | 0 |
| Efficiency | 88. 3 | 92. 7 | 93. 7 | 93. 8 | 93. 5 | 92. 9 | 0 |
| Speed (RPM) | 1794 | 1789 | 1782 | 1776 | 1770 | 1762 | 0 |
| Line Amperes | 14. 2 | 19. 9 | 27. 1 | 35. 2 | 43. 5 | 52. 5 | 0 |
Parts for current product
| Product Number | Description | Quantity |
|---|---|---|
| SA055609 | SA 12H079X202G1 | 1 EA |
| RA050202 | RA 12H079X202G1 | 1 EA |
| 10CB1000A04P | CONDUIT BOX, MACH W/EPOXY PRIMER | 1 EA |
| 09GS1010 | GASKET, DWG, LEADWIRE SEPERATOR | 1 EA |
| 10XN3118K16 | 5/16-18 X 1' GRADE #5, STL, ZINC PLATE | 4 EA |
| HW1001A31 | LOCKWASHER 5/16, ZINC PLT. 591 OD, . 319 I | 4 EA |
| WD1000B16 | KPA-4C BURNDY TERMINAL | 1 EA |
| 10XN2520K06 | 1/4-20 X 3/8' HX HD SCREWGRADE 5, ZINC P | 1 EA |
| HW1001A25 | LOCKWASHER 1/4, ZINC PLT. 493 OD, . 255 I | 1 EA |
| 12EP1107A05P | FR ENDPLATE, MACH W/EPOXY PRIMER | 1 EA |
| HA3400A13SP | STUD, 1/2-13 X 7' WELKER | 4 EA |
| HW1001A50 | LOCKWASHER 1/2, ZINC PLT, . 879 OD, . 509 I | 4 EA |
| 12FH1002P | FAN COVER, CAST W/EPOXY PRIMER | 1 EA |
| HW5100A13 | W4627-047 WVY WSHER | 1 EA |
| 12EP1106A02P | PU ENDPLATE, MACH W/EPOXY PRIMER | 1 EA |
| 10XN3118K36 | 5/16-18 X 2. 25' HEX HD, GRADE 5 | 2 EA |
| 10XN3118K40 | 5/16-18 X 2. 50' HEX HD, GRADE 5 | 4 EA |
| 10XN5013K28 | 1/2-13 X 1. 75 HEX HEAD MACH SCREW, GRAD | 4 EA |
| HW1001A50 | LOCKWASHER 1/2, ZINC PLT, . 879 OD, . 509 I | 4 EA |
| XY5013A12 | NUT, 1/2-13, HEX, STEEL, ZINCPLATED | 4 EA |
| HW1001A50 | LOCKWASHER 1/2, ZINC PLT, . 879 OD, . 509 I | 4 EA |
| HA1005A04SP | SLINGER, OD 3. 620, ID 1. 98, | 1 EA |
| HW4600B41 | V-RING SLINGER 2. 125 X 2. 880 X 0. 280 | 1 EA |
| 10CB1500A01P | CONDUIT BOX LID, MACH W/EPOXY PRIMER | 1 EA |
| 14GS1003 | GASKET CONDUIT BOX LID, NEOP | 1 EA |
| 10XN2520K16 | 1/4-20 X 1' HX HD SCRW GRADE 5, ZINC P | 4 EA |
| HW1001A25 | LOCKWASHER 1/4, ZINC PLT. 493 OD, . 255 I | 4 EA |
| MJ5001A01 | 46-665 RED SEALER | 0. 031 QT |
| MJ5004A04 | ADHESIVE LOCTITE 609 | 0. 005 EA |
| MJ5001A14 | DYNAPRO SEAL, CP MOTORS VC#2508050 (603 | 0. 001 EA |
| MJ5002A01 | SILICON RUBBER SEALANT, 732CL 10. 3 OZ TU | 0. 05 EA |
| HW2501H38 | KEY, 1/2 SQ X 4. 500 | 1 EA |
| LB1115 | LABEL, LIFTING DEVICE | 1 EA |
| HW4500A20 | 1/8NPT SL PIPE PLUG | 2 EA |
| HA4001A01SP | DRAIN PLUG, PLASTIC (MICRO PLAS) | 1 EA |
| MJ1000A75 | GREASE, POLYREX EM EXXON | 0. 2 LB |
| HW4500A20 | 1/8NPT SL PIPE PLUG | 3 EA |
| 09FN5001B03 | EXT FAN ASS'Y W/09FN3001B03 | 1 EA |
| MG1025G02 | PAINT, 782-02 WILKOFAST LIGHT GREY EPOXY | 0. 08 GA |
| 85XU0407S04 | 4X1/4 U DRIVE PIN STAINLESS | 2 EA |
| LB5040 | INSTRUCTION TAG, AC & DC | 1 EA |
| WD1000B12 | TERMINAL, BURNDY YAV8C-L1 | 3 EA |
| LB1119 | WARNING LABEL | 1 EA |
| LB1125C02 | SUPER-E (STOCK CTN LABEL SUPER-E WITH FL | 4 EA |
| LC0006 | CONNECTION LABEL | 1 EA |
| NP1404E | SS UL CSA CC 'AUTOMOTIVE' | 1 EA |
| 12PA1000 | PACKAGING GROUP COMBINED PRINT PK1024A06 | 1 EA |
| LB1506 | LABEL 'AMERICAN MADE' 1. 50 X 1. 00 | 1 EA |
Accesories
| Product Number | Description | Multiplier | |
|---|---|---|---|
| 12-1105 | C FACE KIT | A8 |
SKU: 25992
Positive
I am a Purchasing Agent for a company with 30 plants. MRO is one of the best vendors out there. Use you all the time.
Read moreSKU: 2840530
Baldor erm3108
This motor is a little bit, maybe a half inch longer than the one I took off. But we were able to use the cradle that it came on.
Read moreSKU: 25992
Vem3546
It was harder to find this motor than I expected. MRO Supply had the best price of the 5 vendors I looked at.
Read moreWhen you get to checkout, you’ll be able to select a free gift! Depending on the cart value, you’ll be shown relevant gifts your order qualifies for.
$500
MRO Hat
MRO Golf Balls
MRO Hi-Vis Vests
MRO Mug
$750
32oz Water Bottle
Throw Blanket
30 piece Hex Set
Telescopic Pick Up
$1,250
Golf Cooler
11-in-1 Screw Driver Set
Gorilla Grip Knee Pad
John Deere Oilskin Hat
$2,500
Igloo 1/2 Gallon Jug
Rechargable Headlamp
Larix Trucker Hat
$5,000
Igloo 10 Gallon Cooler
Igloo Party Bucket Cooler
Klein Tools Speaker
Klein Tools 8-in-1
$7,500
GX-6F Pro Golf Range Finder
Bushnell Outdoorsman Speaker
Jaeger 24px Ratcheting Wrench Set
Aspen Beverage Bucket
Item must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/