Image for Illustration purposes only. Actual product may vary
JML3608T 5HP, 3450RPM, 1PH, 60HZ, 184JM, 3640LC, TEFC
MODEL JML3608T
Contact supplier for technical support on: 479-646-4711
$1,608.46 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Free Gift with this product
Typically Ships in: 1 day
Returnable: See conditions
Still Deciding?
Add this item to your saved items and easily come back later.
Hz
60
Frame
184JM
HP
5
Voltage
230
Phase
1
RPM
3400 - 3600
Enclosure
TEFC
| Output | 5 |
|---|---|
| RPM | 3450 |
| Pallet Quantity | 12 |
| Specification Number | 36E510W914 |
| Frame | 184JM |
| Weight | 93. 000 LB |
| Multiplier | L1 |
| Enclosure | TEFC |
| Item Type | MOTOR |
| Manufacturing Plant | FT SMITH |
| Voltage | 230 |
| Poles | 02 |
| Class | STOCK |
| Type | 3640LC |
| Status | Active |
| Commodity Code | 8501. 40. 6040 |
| Origin | US |
| Explosion Proof Class/Group | NONE |
| Revision | Z |
|---|---|
| Status | PRD/A |
| Change # | 595859 |
| Proprietary | No |
| Type | AC |
| Prod. Type | 3640LC |
| Elec. Spec | 36WGW914 |
| CD Diagram | CD0017A02 |
| Enclosure | TEFC |
| Manufacturing Plant | FT SMITH |
| Mech. Spec | 36E510 |
| Layout | 36LYE510 |
| Frame | 184JM |
| Mounting | F1 |
| Poles | 02 |
| Created Date | |
| Base | RG |
| Rotation | R |
| Insulation | F |
| Eff. Date | 5/19/2011 |
| Leads | 2#14 A PH, 2#16 B PH |
| Literature | |
| Elec. Diagram | |
| Replaced By |
Specification History for JML3608T
| Active | Specification Number | Plant | Date | Description |
|---|---|---|---|---|
| 36E510W914 | BALDOR/FT SMITH/REC WHSE #5 | 8/10/1999 | 40LC 2P TEFC HOR 184JM |
| Nameplate No. | NP1256L |
|---|---|
| CAT. NO. | JML3608T |
| SPEC. | 36E510W914 |
| HP | 5 |
| VOLTS | 230 |
| AMP | 19. 5 |
| RPM | 3450 |
| FRAME | 184JM |
| HZ | 60 |
| PH | 1 |
| SER. F. | 1. 00 |
| CODE | G |
| DES | L |
| CLASS | F |
| NEMA-NOM-EFF | 83 |
| PF | 99 |
| RATING | 40C AMB-CONT |
| CC | |
| USABLE AT 208V | |
| DE | 6207 |
| ODE | 6205 |
| ENCL | TEFC |
| SN | |
General Characteristics
| Full Load Torque | 7. 5 LB-FT |
|---|---|
| Start Configuration | DOL |
| No-Load Current | 2. 3 Amps |
| Break-Down Torque | 26 LB-FT |
| Line-line Res. @ 25°C. | 0. 38 Ohms A Ph / 1. 02 Ohms B Ph |
| Pull-Up Torque | 12. 5 LB-FT |
| Temp. Rise @ Rated Load | 93°C |
| Locked-Rotor Torque | 15 LB-FT |
| Temp. Rise @ S. F. Load | |
| Starting Current | 128 Amps |
Load Characteristics
| % of Rated Load | 25 | 50 | 75 | 100 | 125 | 150 | S. F. |
|---|---|---|---|---|---|---|---|
| Power Factor | 98 | 98 | 98 | 98 | 97 | 97 | 0 |
| Efficiency | 66. 4 | 81. 5 | 83. 9 | 83. 9 | 82. 1 | 79. 2 | 0 |
| Speed (RPM) | 3565 | 3539 | 3507 | 3472 | 3430 | 3389 | 0 |
| Line Amperes | 6. 5 | 10. 4 | 14. 9 | 19. 6 | 24. 7 | 29. 9 | 0 |
Parts for current product
| Product Number | Description | Quantity |
|---|---|---|
| SA187588 | SA 07H300X922H1 | 1 EA |
| RA175352 | RA 07H300X922H1 | 1 EA |
| 37FN3002B01 | EXFN, PLASTIC, 7. 50 OD, 1. 155 ID | 1 EA |
| S/P101-000-000 | EPACT PROCEDURES-FS PLANT-POLYREX EM, NO | 1 EA |
| HW3201A01 | 1/2-13 EYEBOLT | 1 EA |
| 09CB3002SP | CB W/1. 38 LEAD HOLE FOR 37, 39, 307 & 30 | 1 EA |
| 09GS1000SP | GASKET-CONDUIT BOX, 1/16 THICK LEXIDE | 1 EA |
| 51XW2520A12 | . 25-20 X. 75, TAPTITE II, HEX WSHR SLTD | 2 EA |
| WD1000B17 | KPA-8C BURNDY TERMINAL | 1 EA |
| 51XW1032A06 | 10-32 X. 38, TAPTITE II, HEX WSHR SLTD S | 1 EA |
| 37EP1101A03 | FR/PU ENDPLATE, MACH | 1 EA |
| HW4500A01 | 1641B(ALEMITE)400 UNIV, GREASE FITT | 1 EA |
| HW5100A08 | W3118-035 WVY WSHR (WB) | 1 EA |
| 07EP1306A02 | ENDPLATE, MACH, W/TIGHT SLEEVE | 1 EA |
| HW4500A01 | 1641B(ALEMITE)400 UNIV, GREASE FITT | 1 EA |
| 10XN2520A36 | 1/4-20X 2 1/4 HEX HD X | 4 EA |
| HW1001A25 | LOCKWASHER 1/4, ZINC PLT. 493 OD, . 255 I | 4 EA |
| XY3118A12 | 5/16-18 HEX NUT DIRECTIONAL SERRATION | 4 EA |
| 07FH4007SP | IEC FH W/GRSR, NOTCH @ 6: 00 & 3 FAN CVR | 1 EA |
| 51XW1032A06 | 10-32 X. 38, TAPTITE II, HEX WSHR SLTD S | 3 EA |
| 09CB3501SP | CONDUIT BOX LID FOR 09CB3001 & 09CB3002 | 1 EA |
| 09GS1013SP | 09 GS FOR 09CB3501 LID - LEXIDE | 1 EA |
| 51XW2520A12 | . 25-20 X. 75, TAPTITE II, HEX WSHR SLTD | 2 EA |
| HW4600B67 | FORSHEDA #V45A FACE SEAL | 1 EA |
| 85XU0407S04 | 4X1/4 U DRIVE PIN STAINLESS | 2 EA |
| LB1115 | LABEL, LIFTING DEVICE | 1 EA |
| MJ1000A75 | GREASE, POLYREX EM EXXON | 0. 05 LB |
| 51XB1214A20 | 12-14X1. 25 HXWSSLD SERTYB | 1 EA |
| HW2501E22 | KEY, 1/4 SQ X 2. 500 | 1 EA |
| HA7000A02 | KEY RETAINER RING, 1 1/8 DIA, 1 3/8 DIA | 1 EA |
| MG1000G27 | PAINT- S9282E CHARCOAL GREY | 0. 036 GA |
| HA3104A18 | THRUBOLT- 5/16-18 X14. 000 | 4 EA |
| LB1119 | WARNING LABEL | 1 EA |
| LB1125C04 | STD-E (STOCK CTN LABEL STD-E WITH FLAG) | 1 EA |
| LC0006 | CONNECTION LABEL | 1 EA |
| NP1256L | ALUM UL CSA CC | 1 EA |
| 07PA1011 | PKG GRP, 07 CAST IRON PK1181 | 1 EA |
| 10XL3807A32 | 3/8 X 2' LAG SCREW TDR #49106 | 2 EA |
SKU: 24596
Great service
Flawless from start to finish. Got my motor at the best price and delivered on time. I will definitely use this company again.
Read moreSKU: 701306
Works great
Fast service product works as described I am nothing but happy at this point
Read moreSKU: 2833706
Replacement motor
I ordered this motor on Wednesday and received it on Thursday by truck, fantastic shipping and very good pricing.
Read moreSKU: 26636
Baldor electric motors
Great motors...Always top quality. Will continue to purchase from MRO Supply.
Read moreWhen you get to checkout, you’ll be able to select a free gift! Depending on the cart value, you’ll be shown relevant gifts your order qualifies for.
$500
MRO Hat
MRO Golf Balls
MRO Hi-Vis Vests
MRO Mug
$750
32oz Water Bottle
Throw Blanket
30 piece Hex Set
Telescopic Pick Up
$1,250
Golf Cooler
11-in-1 Screw Driver Set
Gorilla Grip Knee Pad
John Deere Oilskin Hat
$2,500
Igloo 1/2 Gallon Jug
Rechargable Headlamp
Larix Trucker Hat
$5,000
Igloo 10 Gallon Cooler
Igloo Party Bucket Cooler
Klein Tools Speaker
Klein Tools 8-in-1
$7,500
GX-6F Pro Golf Range Finder
Bushnell Outdoorsman Speaker
Jaeger 24px Ratcheting Wrench Set
Aspen Beverage Bucket
Item must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/