We never sell your data to third parties
Leeson M1115024.00 0.05 HP, 5 RPM DC gearmotor with a 30 NEMA frame and Totally Enclosed Non-Ventilated (TENV) enclosure. Operates on 90V DC at 60 Hz. Features permanent magnet design, Class F insulation, and ball bearings. Suitable for low-speed, high-torque applications.
MODEL M1115024.00
Call for Pricing - 888-671-2883
Typically Ships in: 1 day
Returnable:No
Current
0.56
Drive End Bearing Size
2034
Drive End Bearing Type
Ball
Duty
Continuous
Efficiency
41.6
Enclosure
TENV
Frame
30
Frame Length
3.36
Height
6.69
HP
0.05
Insulation Class
F
KW
0.04
Length
16.5
Opp. Drive End Bearing Size
2034
RPM
5
Service factor
1
Shaft Diameter
0.625
Shaft Length
1.5
Shaft type
Parallel
Thermal protection
No Protection
UL
Recognized
Voltage
90
Width
7.68
Applications
This gearmotor is designed for mounting at any angle, but motor below the reducer should be avoided to prevent leakage of lubricant into the motor should the motor shaft seal fail. Motor’s stall torque could exceed recommended full load torques. A current limiting device such as an SCR control should be used to prevent damage. This issue is even more critical for low voltage motors, typically no controller is used since motor is connected directly to a battery, so some type of current limit or fusing should be considered. Overhung load capacities shown are at center of output shaft.
Features
- Made in the USA
- Steel frame
- Precision machined in-line steel gears
- First stage steel helical gear followed by spur-type gears
- Lubrication is permanent semi-fluid grease, reducing possibility of leakage
- Output shafts have needle bearings for high load capacities
- Shafts are hardened steel
- Conduit box not included, optional conduit box available
- Footnotes: S, US
SKU: 2525293
Good supplier
Very good source for hard to find motors and parts. Great staff and customer service. We will use them again and again.
Read more
| Brand | Saginaw Control |
| Model | SCE-DF1810 |
| Brand | SKF Bearing |
| Model | FYT 40 TF/VA228 |
| Brand | JET Tools |
| Model | 287701 |
| Brand | WILTON |
| Model | 86830 |
| Brand | JET Tools |
| Model | 414127 |
| Brand | Allen Bradley |
| Model | 100S-C30EJ04BC |
SKU: 2525293
Good supplier
Very good source for hard to find motors and parts. Great staff and customer service. We will use them again and again.
Read moreItem must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/