MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
BOSTON 464.41.3131 NONE HUCO-FLEX M COUPLING
MODEL 464.41.3131
Contact supplier for technical support on: 219 874 5248
$222.73 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
O.D.
1.63 in
Thin pressed steel membranes act as the pivotal members in these couplings. Torque is resolved to simple tensile stresses in opposing segments of the membranes. These couplings have near-infinite life and a dynamically balanced construction which makes them suitable for applications requiring high rotational speed and high-level motion integrity e.g. machine tools, robots, centrifuges, turbines, dynamometers.
Specifications
| Family Name | High Performance Couplings |
|---|---|
| Coupling Type | Flex-M |
| Size | 41 |
| Outside Diameter | 1.63 (in) |
| Service Factor | Acceleration |
| Max. Bore 1 | 0.630 (in) |
| Max. Bore 2 | 0.630 (in) |
| Clearance Bore | 0.689 (in) |
| L Min | 1.52 (in) |
| Shaft Connection | Set-Screw |
| Screw Size | M6 |
| Screw Torque | 67.4 (in lb) |
| Wrench 1 | 0.12 (in) |
| Mass | 213.8 (lb) |
| Moment of Inertia | 2,250 |
| Max. Angular Compensation | 2.0 |
| Max. Axial Compensation | 0.20 |
| Max. Radial Compensation | 0.2 |
| Torsional Flexural Stiffness | 1,980 |
| Angular Flexural Stiffness | 2.0 |
| Radial Flexural Stiffness | 100.0 |
| Axial Flexural Stiffness | 8.0 |
| Peak Torque | 100 (in lb) |
| Max. Speed | 5,000.0 |
| Max. Temp | 248.0 (°F) |
| Min. Temp | -40.0 (°F) |
| Insulating | FALSE |
| L1 | 0.5 (in) |
| Brand | SKF Bearing |
| Model | 6202-2Z/VA228 |
| Brand | Bando |
| Model | E540 |
| Brand | Smith Bearings |
| Model | DYR-2-1 |
| Brand | Leeson |
| Model | M1125270.00 |
| Brand | SKF Bearing |
| Model | 6216-Z |
| Brand | Dodge |
| Model | LF-SC-104 |
| Brand | Dodge |
| Model | 023076 |
Disclaimer: The return policy information shown below is merely a copy of the text as stated in TB Wood's Terms and Conditions.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Terms%20and%20Conditions.html
3. Claims for refunds or replacements must be made to the factory. Products may be returned only after written approval and a returned goods authorization number has been received from Customer Service or Application Engineering. Return shipments must be prepaid (Refer to Returned Goods Policy). Final decision about refund or replacement rests solely with TB Wood's Incorporated.
--
Disclaimer: The return policy featured below is for distributors only. Also, it is merely a copy of the text from TB Wood's Distributor Policy and Procedures.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Distributor%20Policies%20and%20Procedures.pdf
Returned Goods
The policy for returning products for defects in workmanship or materials is covered under the “Product Reliability” section.
Distributors and, occasionally, OEMs may want to return products that are overstocked or slow moving. Prior approval and a returned goods authorization number must be obtained from Customer Service or Application Engineering. This number must be referenced on the returned goods shipment. It allows us to identify the contents of the shipment, the Distributor who originated it and the reason for return. Freight must be prepaid.
Products returned for reasons other than factory authorized stock adjustments must have approval from Customer Service or Application Engineering and a returned goods authorization number. They must be sent by prepaid freight and will be subject to a 15% restocking charge. There will be additional charges as necessary for re-boxing and refurbishing. Returned goods must have been manufactured and/or sold by TB Wood’s Incorporated and must be in salable condition. They will be inspected at the factory and if reconditioning is necessary it will be charged to the Distributor. We reserve the right to reject unsalable products.
No products will be accepted for return or exchange if they are obsolete.