MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
TBWOODS WE20RM WE20R MM D-Flex Ring
MODEL WE20RM
Contact supplier for technical support on: 888-829-6637
$300.12 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Orders over $500 qualify for a Free Gift
Typically Ships in: 1 day
Returnable: See conditions
Capscrew torque requirement
41 Nm (Must use TB Wood's Capscrews)
Capscrew torque requirement (Nm)
41 (Must use TB Wood's Capscrews)
Capscrews
M10 - 1.5 x 16 mm
Coupling outside diameter
7
Coupling size
WE20
Dimension (mm) (B)
114
Dimension (mm) (H)
17
Horsepower Rating at 100 RPM
3.7
Horsepower rating at 1150 RPM
42
Horsepower rating at 1200 RPM
44
Horsepower rating at 1750 RPM
64
Horsepower rating at 1800 RPM
66
Horsepower rating at 300 RPM
13
Horsepower rating at 3450 RPM
126
Horsepower rating at 3600 RPM
13
Horsepower rating at 50 RPM
12
Horsepower rating at 690 RPM
25
Horsepower rating at 870 RPM
32
Hub outside diameter
114
Includes
Fastener kit
KW rating at 100 RPM
2.7
Material type
Low carbon steel
Max angular misalignment
3º
Max compatible bore size
60
Max operating temperature
93°C
Max parallel misalignment
2
Max RPM
6600
Max speed
6600
Min compatible bore size
15
Min operating temperature
-40°F
Power rating at 100 RPM
3.7
Screw size
M10 - 1.5 x 16 mm
Screw type
Capscrew
Speed ring width
17
Temperature rating
-40°C to 93°C
Torque rate
260
Type
Tire Coupling
SKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read moreWhen you get to checkout, you’ll be able to select a free gift! Depending on the cart value, you’ll be shown relevant gifts your order qualifies for.
$500
MRO Hat
MRO Golf Balls
MRO Hi-Vis Vests
MRO Mug
$750
32oz Water Bottle
Throw Blanket
30 piece Hex Set
Telescopic Pick Up
$1,250
Golf Cooler
11-in-1 Screw Driver Set
Gorilla Grip Knee Pad
John Deere Oilskin Hat
$2,500
Igloo 1/2 Gallon Jug
Rechargable Headlamp
Larix Trucker Hat
$5,000
Igloo 10 Gallon Cooler
Igloo Party Bucket Cooler
Klein Tools Speaker
Klein Tools 8-in-1
$7,500
GX-6F Pro Golf Range Finder
Bushnell Outdoorsman Speaker
Jaeger 24px Ratcheting Wrench Set
Aspen Beverage Bucket
| Brand | Consolidated Bearings |
| Model | 61914-2RS |
| Brand | FYH Bearing |
| Model | UCNFL20412NP |
SKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read moreDisclaimer: The return policy information shown below is merely a copy of the text as stated in TB Wood's Terms and Conditions.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Terms%20and%20Conditions.html
3. Claims for refunds or replacements must be made to the factory. Products may be returned only after written approval and a returned goods authorization number has been received from Customer Service or Application Engineering. Return shipments must be prepaid (Refer to Returned Goods Policy). Final decision about refund or replacement rests solely with TB Wood's Incorporated.
--
Disclaimer: The return policy featured below is for distributors only. Also, it is merely a copy of the text from TB Wood's Distributor Policy and Procedures.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Distributor%20Policies%20and%20Procedures.pdf
Returned Goods
The policy for returning products for defects in workmanship or materials is covered under the “Product Reliability” section.
Distributors and, occasionally, OEMs may want to return products that are overstocked or slow moving. Prior approval and a returned goods authorization number must be obtained from Customer Service or Application Engineering. This number must be referenced on the returned goods shipment. It allows us to identify the contents of the shipment, the Distributor who originated it and the reason for return. Freight must be prepaid.
Products returned for reasons other than factory authorized stock adjustments must have approval from Customer Service or Application Engineering and a returned goods authorization number. They must be sent by prepaid freight and will be subject to a 15% restocking charge. There will be additional charges as necessary for re-boxing and refurbishing. Returned goods must have been manufactured and/or sold by TB Wood’s Incorporated and must be in salable condition. They will be inspected at the factory and if reconditioning is necessary it will be charged to the Distributor. We reserve the right to reject unsalable products.
No products will be accepted for return or exchange if they are obsolete.