MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
TBWOODS 7SMPB 7SX5/8 MPB SF FLANGE
MODEL 7SMPB
Contact supplier for technical support on: 888-829-6637
$44.52 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bore size
5/8 in
Bore size frac (in)
0.625000
Bore tolerance
+.0005 to +.0015
Bore tolerance (in)
+.0005 to +.0015
Component WR
0.0471
Component WR2 (lbs ft2)
0.0471
Construction type
Finish bore
Coupling size
7
Family ID
2,005
Family name
Sure-Flex Plus Coupling
Flange diameter
4.625
Horsepower Rating at 100 RPM
50
Keyseat size
No KS, Suitable for reboring
Keyseat size (in)
No KS, Suitable for reboring
Length through bore
1.84375
Length through bore C frac (in)
1.843750
Material type
High Strength cast iron
Max angular gap misalignment
0.081 (in) with EPDM/Neoprene Sleeves and 0.020 (in) with Hytrel Sleeves
Max angular misalignment
1 with EPDM/neoprene sleeves and 1/4 with hytrel sleeves
Max compatible bore size
1.875
Max parallel misalignment
7
Max RPM
5,250
Max speed
5250
Maximum angular gap misalignment
0.081 with EPDM/Neoprene Sleeves and 0.020 with Hytrel Sleeves
Maximum angular misalignment
1 Degree with EPDM/Neoprene Sleeves and 1/4 Degree with Hytrel Sleeves
Maximum parallel misalignment (in)
0.020 with EPDM/Neoprene Sleeves and 0.012 with Hytrel Sleeves
Min compatible bore size
0.625
Outside diameter
4.625
Outside diameter D frac (in)
4.625000
Power rating at 100 RPM
1.1 kW with EPDM or Neoprene sleeve, 3.4 kW with Hytrel sleeve
Product description
7S x 5/8 in BTS Flange, No Keyseat
Product family
Sure-Flex Type S, BTS Flange
Screw size
Setscrew
Screw type
Flange, Type S
Set screw distance
0.375
Set screw distance S frac (in)
0.375000
Setscrew length
0.75
Setscrew length frac (in)
0.750000
Setscrew size location
5/16 18 UNC, One over KS and at 90 degrees
Setscrew size, location
5/16 18 UNC, One over KS and at 90 degrees
Setscrew torque requirement
13
Setscrew torque requirement (ft lbs)
13
SF flance length T frac (in)
0.687500
SF flange length
0.6875
SF hub diameter
2.8125
SF hub diameter H frac (in)
2.812500
SF hub length
20
SF hub length E frac (in)
1.000000
Torque
940 in-lb with EPDM or Neoprene sleeve, 2,875 in-lb with Hytrel sleeve
Torque rate
940 (in-lbs) with EPDM or Neoprene sleeve; 2,875 (in-lbs) with Hytrel sleeve
Torque rate (in lbs)
940 with EPDM or Neoprene sleeve, 2875 with Hytrel sleeve
Unit Of Measure
English
Description: Our new Sure-Flex Plus EPDM and Neoprene sleeves are best-in-class for coupling performance and value. Their 4-way flexing action absorbs virtually all types of shock, misalignment, and end float. With Sure-Flex couplings, the need for lubrication and maintenance is eliminated.
SKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read moreSKU: 336840
Muy buen servicio y rapidez en la entrega
Primera vez q compro con esta compañía, recomiendo ampliamente comprar con ellos y claro q volveria a comprar otra vez muy buen servicio y entrega rapida
Read more
| Brand | Bevel Tools |
| Model | 7207010 |
| Brand | Thomas |
| Model | 238222 |
| Brand | NTN Bearing |
| Model | 24038EMK30W33C3 |
| Brand | Cleveland |
| Model | C46207 |
| Brand | Jason Industrial |
| Model | 4450-0200-100 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-410154 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-662046 |
| Brand | Irwin Tools |
| Model | 1913311 |
SKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read moreSKU: 336840
Muy buen servicio y rapidez en la entrega
Primera vez q compro con esta compañía, recomiendo ampliamente comprar con ellos y claro q volveria a comprar otra vez muy buen servicio y entrega rapida
Read moreDisclaimer: The return policy information shown below is merely a copy of the text as stated in TB Wood's Terms and Conditions.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Terms%20and%20Conditions.html
3. Claims for refunds or replacements must be made to the factory. Products may be returned only after written approval and a returned goods authorization number has been received from Customer Service or Application Engineering. Return shipments must be prepaid (Refer to Returned Goods Policy). Final decision about refund or replacement rests solely with TB Wood's Incorporated.
--
Disclaimer: The return policy featured below is for distributors only. Also, it is merely a copy of the text from TB Wood's Distributor Policy and Procedures.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Distributor%20Policies%20and%20Procedures.pdf
Returned Goods
The policy for returning products for defects in workmanship or materials is covered under the “Product Reliability” section.
Distributors and, occasionally, OEMs may want to return products that are overstocked or slow moving. Prior approval and a returned goods authorization number must be obtained from Customer Service or Application Engineering. This number must be referenced on the returned goods shipment. It allows us to identify the contents of the shipment, the Distributor who originated it and the reason for return. Freight must be prepaid.
Products returned for reasons other than factory authorized stock adjustments must have approval from Customer Service or Application Engineering and a returned goods authorization number. They must be sent by prepaid freight and will be subject to a 15% restocking charge. There will be additional charges as necessary for re-boxing and refurbishing. Returned goods must have been manufactured and/or sold by TB Wood’s Incorporated and must be in salable condition. They will be inspected at the factory and if reconditioning is necessary it will be charged to the Distributor. We reserve the right to reject unsalable products.
No products will be accepted for return or exchange if they are obsolete.