Stop searching, install MROSupply Smart Check and see our price instantly wherever you browse.

Add products to your shopping cart

2C-293-Z

Image for Illustration purposes only. Actual product may vary

View in markdown

Climax Metal 2C-293-Z two-piece clamping shaft collar with 2-15/16" bore, steel construction, zinc-plated finish. Split design enables mid-shaft installation without removing components; clamping screws deliver uniform holding force without shaft marring. Ideal for axial positioning and light-duty thrust applications in industrial machinery.

MODEL 2C-293-Z

BRAND

SKU

746111

WEIGHT

1.656 lb

UOM

each

UPC

44861058862

Contact supplier for technical support on: 800 542 6552

$81.84 Each

Prices are subject to change

FREE SHIPPING ON ORDERS OVER $100

Select Quantity

GET A QUOTE

Typically Ships in: 1 day

Returnable: See conditions

Bore Size

2.9375 in

Construction

2-Piece

Finish

Zinc Plated

Inside Diameter

2-15/16 in

Material

Steel

OD

4-1/4 in

Screw Size

3/8-24 UN-3A x 1 in

Screw Style

Hex Socket Cap

Series

2C Series

Type

Industry Standard

Width

7/8 in

Climax Metal Products Climax 2C-293-Z

UPC: 044861058862 | UNSPSC: 31162811 | GTIN:

Bearings > Shaft Collars, Adapters & Extenders > Clamping Collars

Climax Clamping Collar, Industry Standard, Series: 2C Series, 2-Piece Construction, 2-15/16 in ID, 4-1/4 in OD, 7/8 in Width, Hex Socket Cap Screw Screw Style, 3/8-24 UN-3A x 1 in Screw, Steel, Zinc Plated

Features:

Design fully engages the shaft without marring
Easily installed where major disassembly would otherwise be required
Greater axial holding power than setscrew or 1-piece clamping collars
Effective on hard and soft shafts
Without recessed screw
Steel hex socket cap screw

Specs:

Screw Style	Hex Socket Cap Screw
Construction	2-Piece
Screw Size	3/8-24 UN-3A x 1 in
Inside Diameter	2-15/16 in
Outside Diameter	4-1/4 in
Material	Steel
Finish	Zinc Plated
Width	7/8 in
Type	Industry Standard
Series	2C Series

Certifications/Standards:

ASTM A108 | ASTM A574 Cap Screw

2C-293-Z Climax Metal

SKU: 746122

A 'must have' item.

These shaft locks take a beating day in and day out. They are a must-have item for my operation.

When will I be charged for my order?

Do you provide credit terms?

Can I get a discounted price? I am a reseller / government entity.

What is the return/warranty policy?

Can it be shipped today?

Does “Usually ships in 24 hours” mean it’s in stock?

Recently Viewed

#107915

BH100

Dixon BH100 Boss-Lock Cam & Groove Type H dust cap. Brass construction with Buna-N seal protects cam and groove couplings from dust and debris when disconnected. Boss-Lock safety locking handle ensures a secure, vibration-resistant connection.

Brand	Dixon
Model	BH100

$58.97 Each

Free shipping

#43420

RF752-10E-B13-G

Boston Gear 30234617 RF752-10E-B13-G 10:1 single reduction worm gear speed reducer from the 700 Series. Cast iron housing with 5.2" center distance. 250TC coupling flange input and 2" left-side solid output shaft. Designed for general industrial power transmission applications.

Brand	Boston Gear
Model	RF752-10E-B13-G

$3,808.20 Each

Free Shipping orders over $100

#2385295

12/BX158

Gates 12/BX158 Tri-Power PowerBand V-Belt with BX cogged section, 158-inch effective length, and 12-band construction. Designed for heavy-duty industrial drives requiring high shock-load resistance and minimal vibration. Features fiber-loaded EPDM compound and precision-ground cogged sidewalls for superior flexibility and heat dissipation.

Brand	Gates Rubber
Model	12/BX158

$1,377.41 Each

Free Shipping orders over $100

#734831

70X90X10 HMS5 RG

SKF / CR Seals 70X90X10 HMS5 RG HMS5 Single Lip radial shaft oil seal for 70mm shaft diameter, 90mm housing bore, and 10mm seal width. Features a NBR sealing lip with spring-loaded garter spring for consistent radial sealing force. Operating temperature range: -40°F to 250°F (-40°C to 121°C). Suitable for electric motors, gearboxes, pumps, and rotating equipment.

Brand	SKF Seals
Model	70X90X10 HMS5 RG

$10.43 Each

Free shipping

#96740273

33-68143-AZT

Meltric 33-68143-AZT DS60 switch-rated DECONTACTOR inlet, 3-pole plus ground (3P+G), 60A, 600VAC, 60Hz. Polymer blue Size 4 inlet with Type 4X and IP69 rating for corrosion resistance and high-pressure, high-temperature washdown applications. Features spring-loaded silver-nickel butt contacts, enclosed arc chambers, and dead-front safety shutter. UL/CSA listed as motor circuit disconnect and branch circuit disconnect switch.

Brand	Meltric
Model	33-68143-AZT

$254.27 Each

Free Shipping orders over $100

#6566130

5314

Consolidated Bearings 5314 thrust ball bearing with 70mm bore. Designed for axial load applications, this single-direction thrust ball bearing provides reliable performance in industrial machinery. Suitable for moderate speed and load conditions where space is limited.

Brand	Consolidated Bearings
Model	5314

$535.24 Each

Free Shipping orders over $100

#582457

108749

Dodge 108749 CX128 cogged V-belt with 130.9" datum length, C profile (0.875" width), static conductive construction, and neoprene rubber body. Features length-stabilized polyester cord reinforcement, good oil resistance, and an operating temperature range of -40°F to 140°F.

Brand	Dodge
Model	108749

$83.90 Each

Free shipping

#2788950

YR-1-1/4-XC

Smith Bearing YR-1-1/4-XC yoke-type cam follower with 1-1/4" roller OD, sealed and crowned design for extended life in track, guide, and cam applications. Needle roller bearing construction handles high radial loads.

Brand	Smith Bearings
Model	YR-1-1/4-XC

$24.47 Each

Free shipping

Reviews

SKU: 746122

A 'must have' item.

These shaft locks take a beating day in and day out. They are a must-have item for my operation.