Add products to your shopping cart



Image for Illustration purposes only. Actual product may vary

  • Brand:
  • Model: 2BK110
  • Condition: NEW
  • SKU: 346689


  • Typically ships in: 1 day
  • Weight: 9.9 lb
  • Contact supplier for technical support on: 888-829-6637

$131.99 Each

Select Quantity

Unit of measure: each

Returnable: See conditions

Payment methods:


Didn’t use yet

I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.

Read more

Additional Description

FamilyFHP QT Bushed
Material TypeCI
Arm Thickness Hub in0.43750
Arm Thickness Rim0.4375
Arm Width Hub in1.0625
Arm Width Rim0.9375
Bead Thickness Hub in0.438
Bead Thickness Rim0.438
Bushing Torque Rating1,750.00
Component Weight lbs9.9
Datum Diameter10.4
Face Width in1.75
Family ID2,000
Family NameV-Belt Sheaves and Pulleys
Hub Diameter in2.75
Hub Length in0.875
Inside Diameter in9.00
K Hub Location in0.63
Material Class30
Max Stock Diameter Dec in0.4375
Max Stock Diameter Frac in0.437500
Max Stock Diameter mm14
Min Stock Diameter Dec in1.5000
Min Stock Diameter Frac in1.500000
Min Stock Diameter mm38
Number Arms6
Number Of Grooves2
Outside Diameter in10.75
Parting Line1.0000
Pitch Diameter in10.81
RPM Lower Limit350
RPM Upper Limit2,330
Sales Drawing 2D2BK110
Torque Limit1,750
Wr2 lbs ft21.28
belt section 02B

Return policy

Disclaimer: The return policy information shown below is merely a copy of the text as stated in TB Wood's Terms and Conditions.


3. Claims for refunds or replacements must be made to the factory. Products may be returned only after written approval and a returned goods authorization number has been received from Customer Service or Application Engineering. Return shipments must be prepaid (Refer to Returned Goods Policy). Final decision about refund or replacement rests solely with TB Wood's Incorporated. 


Disclaimer: The return policy featured below is for distributors only. Also, it is merely a copy of the text from TB Wood's Distributor Policy and Procedures.


Returned Goods
The policy for returning products for defects in workmanship or materials is covered under the “Product Reliability” section.

Distributors and, occasionally, OEMs may want to return products that are overstocked or slow moving. Prior approval and a returned goods authorization number must be obtained from Customer Service or Application Engineering. This number must be referenced on the returned goods shipment. It allows us to identify the contents of the shipment, the Distributor who originated it and the reason for return. Freight must be prepaid. 

Products returned for reasons other than factory authorized stock adjustments must have approval from Customer Service or Application Engineering and a returned goods authorization number. They must be sent by prepaid freight and will be subject to a 15% restocking charge. There will be additional charges as necessary for re-boxing and refurbishing. Returned goods must have been manufactured and/or sold by TB Wood’s Incorporated and must be in salable condition. They will be inspected at the factory and if reconditioning is necessary it will be charged to the Distributor. We reserve the right to reject unsalable products.

No products will be accepted for return or exchange if they are obsolete.


Product's availability

State of California Proposition 65 Product Warning