Add products to your shopping cart



Image for Illustration purposes only. Actual product may vary

  • Brand:
  • Model: 48012D
  • Condition: NEW
  • SKU: 345090


  • Typically ships in: 1 day
  • Weight: 1085.0 lb
  • Contact supplier for technical support on: 888-829-6637

$8,407.51 Each

Select Quantity

Unit of measure: each

Returnable: See conditions

Payment methods:

Additional Description

Material TypeCI
Arm Section Modulus Zx11.34
Arm Section Modulus Zy4.64
Arm Thickness Hub in2.25000
Arm Thickness Rim2.0000
Arm Torque309,153
Arm Width Hub in5.5000
Arm Width Rim4.7500
BalanceStandard, 1 plane
Bead Diameter Hub in17.45
Bead Diameter Rim45.04
Bead Thickness Hub in2.250
Bead Thickness Rim2.000
Bushing Torque Rating250,000.00
Catalog E0.7500
Catalog L9.375
Catalog M7.43750
Component Weight lbs1085
Datum Diameter48.0
Dynamic Balance RPM531
E Dimension in0.53
Face Width in17.56
Family ID2,000
Family NameV-Belt Sheaves and Pulleys
Hub Diameter in13
Hub Length in7.250
Inside Diameter in45.31
K Hub Location in2.63
Material Class35
Max Stock Diameter Dec in7.0000
Max Stock Diameter Frac in7.000000
Max Stock Diameter mm150
Min Stock Diameter Dec in2.9375
Min Stock Diameter Frac in2.937500
Min Stock Diameter mm150
Number Arms6
Number Of Grooves12
Outside Diameter in48.60
Parting Line8.2500
Pitch Diameter in48.60
RPM Lower Limit70
RPM Upper Limit520
Sheave Torque Rating309,200
T1 T2 N12,450.10
Torque Limit250,000
Wr2 lbs ft23,020.00
belt section 02D

Return policy

Disclaimer: The return policy information shown below is merely a copy of the text as stated in TB Wood's Terms and Conditions.


3. Claims for refunds or replacements must be made to the factory. Products may be returned only after written approval and a returned goods authorization number has been received from Customer Service or Application Engineering. Return shipments must be prepaid (Refer to Returned Goods Policy). Final decision about refund or replacement rests solely with TB Wood's Incorporated. 


Disclaimer: The return policy featured below is for distributors only. Also, it is merely a copy of the text from TB Wood's Distributor Policy and Procedures.


Returned Goods
The policy for returning products for defects in workmanship or materials is covered under the “Product Reliability” section.

Distributors and, occasionally, OEMs may want to return products that are overstocked or slow moving. Prior approval and a returned goods authorization number must be obtained from Customer Service or Application Engineering. This number must be referenced on the returned goods shipment. It allows us to identify the contents of the shipment, the Distributor who originated it and the reason for return. Freight must be prepaid. 

Products returned for reasons other than factory authorized stock adjustments must have approval from Customer Service or Application Engineering and a returned goods authorization number. They must be sent by prepaid freight and will be subject to a 15% restocking charge. There will be additional charges as necessary for re-boxing and refurbishing. Returned goods must have been manufactured and/or sold by TB Wood’s Incorporated and must be in salable condition. They will be inspected at the factory and if reconditioning is necessary it will be charged to the Distributor. We reserve the right to reject unsalable products.

No products will be accepted for return or exchange if they are obsolete.


Product's availability

State of California Proposition 65 Product Warning