MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
Grove Gear GR-BMQ852-20-L-180 20:1 Ratio, 1.125" Input Diameter, 2" Output Diameter, Right Angle Cast Iron Single-Reduction Worm Reducer 20:1 Ratio, 1.125" Input Diameter, 2" Output Diameter, Right Angle Cast Iron Single-Reduction Worm Reducer
MODEL GR8520293.00
Contact supplier for technical support on: 888 378 6245
$4,410.22 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Assembly
BMQ-L
Center Distance
5.2 In.
Center distance (in)
5.25
Center Distance Range
Above 3.25"
Gear Drive Reductions
Single
Gear Type
Worm
H-Tap Size
5/8-11 UNC
Housing material
Cast iron
HP Range
15 HP (< 20)
Input Bore (C Face)
1.125
Input Diameter (in)
1.125
Input Flange
182-4TC
Input HP
14.56
Input HP @ 1750 RPM
14.56
Input Keyway (C Face)
1/4 x 1/8
Input RPM
1750
Input Style
Quill
Max OHL (Output Shaft)
3560
Max Thrust Load (Output Shaft)
3412
Model Code
BMQ852
Motor Frame Size
180
Mounting Style
Base
No. of Gear Reductions
Single
Output
Left
Output Diameter (in)
2.000
Output HP
12.98
Output Key
1/2 X 3.50
Output RPM
87
Output Shaft Assembly Code
L
Output Shaft Direction
Left
Output Shaft Orientation
L
Output Style
L
Output Torque
9351
Output Torque (lb-in)
9351
Output Torque Range
5000 to 10000 in lbs
Output type
Solid Shaft
Overhung Load
3560
Paint/Coating
Blue
Product Line
GR Series - Ironman Worm Gear Reducers
Product Type
Right Angle
Ratio
20 to 1
Ratio Range
20-1
Reducer
Worm - Right Angle
Reducer Style
Worm - Right Angle
Series
GR Series - Ironman Worm Gear Reducers
Series Code
GR
Series Style
GR-BMQ-L
Service Factor
1
Shaft Seal Material
Viton
Size
180TC
TAP Depth
1.25
Thrust Rating - output shaft
3412
Regal Beloit Grove Gear&Reg; GR8520293.00
UPC: 690310032022 | UNSPSC: 26111537 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Grove Gear® IRONMAN® Worm Gear Reducer, Right Angle Single Reduction, Series: GR Series, 20:1 Gear Ratio, 15.56 hp Input, 12.98 hp Output, C-Face Quill Input, Shaft Output, 1-1/8 in Dia Input, 2 in Dia x 4.78 in L Output, 87 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 9351 in-lb Output, 5-1/4 in Centre Distance, 1/4 x 1/8 in Input, 1/2 x 3-1/2 in Output Keyway, PAG Synthetic Oil Lubrication, Base Mount, Cast Iron
Features:
- One piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment
- Factory filled with premium Mobil® Glygoyle® 460 PAG lubricant
- Large oil capacity provides positive splash lubrication and superior cooling capability
- FKM double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals
- The unique quill seal guard protects the input seal from damage during motor installation
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life
- Oversized high speed bearings, positively retained for frequent reversing and start/stop cycles
- Tapered roller bearings on output shaft for high overhung and thrust load capacities
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product
- Ultimate application flexibility with all angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles
- Mounting dimensions are interchangeable with most industry standard reducers
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks
- Oversized steel output shaft provides superior overhung load and torque characteristics
Specs:
- Input Maximum Speed: 1750 rpm
- Output Maximum Speed: 87 rpm
- Centre Distance: 5-1/4 in
- Input Type: C-Face Quill
- Output Size: 2 in Dia x 4.78 in L
- Input Size: 1-1/8 in Dia
- Lubrication Type: PAG Synthetic Oil
- Torque Rating: 9351 in-lb Output
- Horsepower: 15.56 hp Input, 12.98 hp Output
- Keyway Size: 1/4 x 1/8 in Input, 1/2 x 3-1/2 in Output
- Gear Ratio: 20:1
- Output Type: Shaft
- Mounting Type: Base
- Material: Cast Iron
- Type: Right Angle Single Reduction
- Series: GR Series
Packaging:
- Weight: 247.0 lb
Warranty:
Limited
SKU: 1318956
Replacement for an obsolete gearbox
We needed this gearbox as a replacement for an obsolete model made by Grove Gear back in the 90's. Needed to call the company to find out the equivalent and they directed me towards MRO. If this one will last as long as its predecessor I'll be retired by the time it will need to be replaced again.
Read moreSKU: 2919143
Grove gear
ordered it got a week early was exact to the specs performed flawlessly
Read more
| Brand | Dixon |
| Model | SFC2400 |
| Brand | Baldor |
| Model | FPM2551TS-2/4 |
| Brand | Hubbell Wiring |
| Model | HBLRF400FR |
| Brand | Mitsubishi Electric |
| Model | FX0-20MT-D |
| Brand | Rossi |
| Model | R000162407 |
| Brand | Bando |
| Model | 250-S8M-1000 |
| Brand | Greenfield Threading |
| Model | 367230 |
| Brand | Pramet |
| Model | 6922420 |
SKU: 1318956
Replacement for an obsolete gearbox
We needed this gearbox as a replacement for an obsolete model made by Grove Gear back in the 90's. Needed to call the company to find out the equivalent and they directed me towards MRO. If this one will last as long as its predecessor I'll be retired by the time it will need to be replaced again.
Read moreSKU: 2919143
Grove gear
ordered it got a week early was exact to the specs performed flawlessly
Read more