MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
Grove Gear GR-BMQ852-30-R-180 30:1 Ratio, 1.125" Input Diameter, 2" Output Diameter, Right Angle Cast Iron Single-Reduction Worm Reducer 30:1 Ratio, 1.125" Input Diameter, 2" Output Diameter, Right Angle Cast Iron Single-Reduction Worm Reducer
MODEL GR8520307.00
Contact supplier for technical support on: 888 378 6245
$4,410.22 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Assembly
BMQ-R
Center Distance
5.2 In.
Center distance (in)
5.25
Center Distance Range
Above 3.25"
Gear Drive Reductions
Single
Gear Type
Worm
H-Tap Size
5/8-11 UNC
Housing material
Cast iron
HP Range
10 HP (< 15)
Input Bore (C Face)
1.125
Input Diameter (in)
1.125
Input Flange
182-4TC
Input HP
1.949
Input HP @ 1750 RPM
10.538
Input Keyway (C Face)
1/4 x 1/8
Input RPM
100
Input Style
Quill
Max OHL (Output Shaft)
3560
Max Thrust Load (Output Shaft)
3412
Model Code
BMQ852
Motor Frame Size
180
Mounting Style
Base
No. of Gear Reductions
Single
Output
Right
Output Diameter (in)
2.000
Output HP
8.91
Output Key
1/2 X 3.50
Output RPM
58
Output Shaft Assembly Code
R
Output Shaft Direction
Right
Output Shaft Orientation
R
Output Style
R
Output Torque
9627
Output Torque (lb-in)
23305
Output Torque Range
5000 to 10000 in lbs
Output type
Solid Shaft
Overhung Load
3560
Paint/Coating
Blue
Product Line
GR Series - Ironman Worm Gear Reducers
Product Type
Right Angle
Ratio
30 to 1
Ratio Range
30-1
Reducer
Worm - Right Angle
Reducer Style
Worm - Right Angle
Series
GR Series - Ironman Worm Gear Reducers
Series Code
GR
Series Style
GR-BMQ-R
Service Factor
1
Shaft Seal Material
Viton
Size
180TC
TAP Depth
1.25
Thrust Rating - output shaft
3412
Regal Beloit Grove Gear&Reg; GR8520307.00
UPC: 690310032121 | UNSPSC: 26111537 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Grove Gear® IRONMAN® Worm Gear Reducer, Right Angle Single Reduction, Series: GR Series, 30:1 Gear Ratio, 10.538 hp Input, 8.91 hp Output, C-Face Quill Input, Shaft Output, 1-1/8 in Dia Input, 2 in Dia x 4.78 in L Output, 58 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 9627 in-lb Output, 5-1/4 in Centre Distance, 1/4 x 1/8 in Input, 1/2 x 3-1/2 in Output Keyway, PAG Synthetic Oil Lubrication, Base Mount, Cast Iron
Features:
- One piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment
- Factory filled with premium Mobil® Glygoyle® 460 PAG lubricant
- Large oil capacity provides positive splash lubrication and superior cooling capability
- FKM double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals
- The unique quill seal guard protects the input seal from damage during motor installation
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life
- Oversized high speed bearings, positively retained for frequent reversing and start/stop cycles
- Tapered roller bearings on output shaft for high overhung and thrust load capacities
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product
- Ultimate application flexibility with all angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles
- Mounting dimensions are interchangeable with most industry standard reducers
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks
- Oversized steel output shaft provides superior overhung load and torque characteristics
Specs:
- Input Maximum Speed: 1750 rpm
- Output Maximum Speed: 58 rpm
- Centre Distance: 5-1/4 in
- Input Type: C-Face Quill
- Output Size: 2 in Dia x 4.78 in L
- Input Size: 1-1/8 in Dia
- Lubrication Type: PAG Synthetic Oil
- Torque Rating: 9627 in-lb Output
- Horsepower: 10.538 hp Input, 8.91 hp Output
- Keyway Size: 1/4 x 1/8 in Input, 1/2 x 3-1/2 in Output
- Gear Ratio: 30:1
- Output Type: Shaft
- Mounting Type: Base
- Material: Cast Iron
- Type: Right Angle Single Reduction
- Series: GR Series
Packaging:
- Weight: 247.0 lb
Warranty:
Limited
SKU: 2919143
Grove gear
ordered it got a week early was exact to the specs performed flawlessly
Read moreSKU: 1328004
Enginiering
got what I need it the first time. no hassle, friendly customer service, communication is excellent, I am happy with the delivery time.
Read moreSKU: 1318238
Right on
Took a bit to ship but after it shipped I got it fast. Right product.
Read more
| Brand | Durham |
| Model | 403-75 |
| Brand | E-T-A |
| Model | 2210-T220-K0F2-H231-1.5A |
| Brand | Band-It |
| Model | C35699 |
| Brand | Hubbell Wiring |
| Model | HBL5260SA |
| Brand | Bestorq |
| Model | 800-8M-30 |
| Brand | PCI |
| Model | PTR-6.00 |
SKU: 2919143
Grove gear
ordered it got a week early was exact to the specs performed flawlessly
Read moreSKU: 1328004
Enginiering
got what I need it the first time. no hassle, friendly customer service, communication is excellent, I am happy with the delivery time.
Read moreSKU: 1318238
Right on
Took a bit to ship but after it shipped I got it fast. Right product.
Read more