We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Grove Gear Flexaline GRG-BMQ821-50-L-56 GRG8210117.00 50:1 ratio cast iron single-reduction worm gear speed reducer with 2.06" center distance. Features a 56C C-face quill input with 0.625" input diameter and a 1" left-hand solid output shaft. Part of the Flexaline series for interchangeability with legacy Flexaline mounting dimensions.
MODEL GRG8210117.00
Contact supplier for technical support on: 800-626-2120
$744.17 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Assembly
BMQ-L
Center Distance
2.1 In.
Center distance (in)
2.06
Center Distance Range
1" thru 3.25"
Gear Drive Reductions
Single
Gear Type
Worm
H-Tap Size
5/16-18 UNC
Height (in)
10.50
Housing material
Cast iron
HP Range
1/2 to 3/4 HP (< 1)
Input Bore (C Face)
0.625
Input Diameter (in)
0.625
Input Flange
56C
Input HP
0.769
Input HP @ 1750 RPM
0.769
Input RPM
1750
Input Style
Quill
Keyway
3/16 X 3/32
Length (in)
10.69
Max OHL (Output Shaft)
1385
Max Thrust Load (Output Shaft)
1144
Model Code
BMQ821
Motor Frame Size
56
Motor HP Rating
0.75
Mounting Style
No Base
No. of Gear Reductions
Single
Output
Left
Output Diameter (in)
1.000
Output HP
0.539
Output Key
1/4 X 1.44
Output RPM
35
Output Shaft Assembly Code
L
Output Shaft Direction
Left
Output Shaft Orientation
L
Output Style
L
Output Torque
970
Output Torque Range
500 to 1000 in lbs
Output type
Solid Shaft
Overhung Load
1385
Paint/Coating
Blue
Product Line
GRG Series - Ironman Worm Gear Reducers
Product Type
Right Angle
Ratio
50 to 1
Ratio Range
50-1
Reducer
Worm - Right Angle
Reducer Style
Worm - Right Angle
Reducer Type
Single
Series
GRG Series - Ironman Worm Gear Reducers
Series Code
GRG
Series Style
GRG-BMQ-L
Series Type
Cast Iron 800 Worm Gear Reducers
Service Factor
1
Shaft Seal Material
Viton
Size
56C
TAP Depth
0.63
Thrust Rating - output shaft
1144
Width (in)
9.06
Regal Beloit Grove Gear&Reg; GRG8210117.00
UPC: 690310036846 | UNSPSC: 26111537 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Grove Gear IRONMAN Worm Gear Reducer, Right Angle Single Reduction, Series: GRG, 50:1 Gear Ratio, 0.769 hp Input, 0.539 hp Output, 0.75 hp Motor, C-Face Quill Input, Shaft Output, 5/8 in Dia Input, 1 in Dia x 2.29 in L Output, 35 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 970 in-lb Output, 2.06 in Centre Distance, 3/16 x 3/32 in Input, 0.25 x 1.44 in Output Keyway, PAG Synthetic Oil Lubrication, No Base Mount, Cast Iron
Features:
- One piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment
- Factory filled with premium Mobil Glygoyle 460 PAG lubricant
- Large oil capacity provides positive splash lubrication and superior cooling capability
- FKM double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals
- The unique quill seal guard protects the input seal from damage during motor installation
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life
- Oversized high speed bearings, positively retained for frequent reversing and start/stop cycles
- Tapered roller bearings on output shaft for high overhung and thrust load capacities
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product
- Ultimate application flexibility with all angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles
- Mounting dimensions are interchangeable with most industry standard reducers
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks
- Oversized steel output shaft provides superior overhung load and torque characteristics
Specs:
| Input Maximum Speed | 1750 rpm |
|---|---|
| Output Maximum Speed | 35 rpm |
| Centre Distance | 2.06 in |
| Input Type | C-Face Quill |
| Output Size | 1 in Dia x 2.29 in L |
| Input Size | 5/8 in Dia |
| Lubrication Type | PAG Synthetic Oil |
| Torque Rating | 970 in-lb Output |
| Horsepower | 0.769 hp Input, 0.539 hp Output, 0.75 hp Motor |
| Keyway Size | 3/16 x 3/32 in Input, 0.25 x 1.44 in Output |
| Gear Ratio | 50:1 |
| Output Type | Shaft |
| Mounting Type | No Base |
| Material | Cast Iron |
| Type | Right Angle Single Reduction |
| Series | GRG |
Packaging:
| Length | 10.69 in |
|---|---|
| Width | 9.06 in |
| Height | 10.5 in |
Limited
SKU: 1318956
Replacement for an obsolete gearbox
We needed this gearbox as a replacement for an obsolete model made by Grove Gear back in the 90's. Needed to call the company to find out the equivalent and they directed me towards MRO. If this one will last as long as its predecessor I'll be retired by the time it will need to be replaced again.
Read moreSKU: 1328004
Enginiering
got what I need it the first time. no hassle, friendly customer service, communication is excellent, I am happy with the delivery time.
Read moreSKU: 2919143
Grove gear
ordered it got a week early was exact to the specs performed flawlessly
Read more
| Brand | Koyo Bearing |
| Model | 22214RZKW33C3 |
| Brand | Climax Metal |
| Model | MRC-25-KW |
| Brand | NSI Industries |
| Model | IPLG6-4B |
SKU: 1318956
Replacement for an obsolete gearbox
We needed this gearbox as a replacement for an obsolete model made by Grove Gear back in the 90's. Needed to call the company to find out the equivalent and they directed me towards MRO. If this one will last as long as its predecessor I'll be retired by the time it will need to be replaced again.
Read moreSKU: 1328004
Enginiering
got what I need it the first time. no hassle, friendly customer service, communication is excellent, I am happy with the delivery time.
Read moreSKU: 2919143
Grove gear
ordered it got a week early was exact to the specs performed flawlessly
Read more