We never sell your data to third parties
Dodge 20Q40R56WP TIGEAR-2 worm gear speed reducer, 40:1 ratio, 2" center distance, quill input, right side solid output shaft 1" diameter, 56C frame, cast iron housing, white epoxy paint. 0.76 HP input, 0.56 HP output, 801 in-lb output torque. Totally enclosed, ventless, maintenance-free design with synthetic lubricant.
MODEL 20Q40R56WP
Contact supplier for technical support on: +1-864-284-5700
$1,024.26 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
#144493
Brand
Dodge
Model
20QZ18L14WP
#5004338
Brand
Dodge
Model
20S12LRWP
#141948
Brand
Dodge
Model
20Q40R56WP
#149909
Brand
Dodge
Model
202Q10L56WP
Base to output center height
2.2400 in, 56.896 mm
Case size
20
Center Distance
2" (case size 20)
Center distance (in)
2 in, Center distance (in):2.0000 in, 50.8 mm
Center to end of shaft distance
4.6900 in, 119.126 mm
Finish
White paint
Frame
56C NEMA flange mount
Gear Type
Worm gear, right-angle
Horsepower rating input
0.7600 hp, 0.567 kW
Horsepower rating output
0.5600 hp, 0.418 kW
Housing
Cast iron
Housing material
Cast iron
Input
Quill type
Input flange
56C
Input HP
0.76
Input style
Quill
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 56C frame
Mounting bolt pattern length
5.0000 in, 127.0 mm
Mounting bolt pattern width
2.8800 in, 73.152 mm
Nominal ratio
40
Output
Right side solid shaft, 1.000" diameter
Output bore/shaft diameter
1 in
Output horse power
0.56
Output shaft center to input motor mounting face distance
5.0000 in, 127.0 mm
Output style
Right
Overhung load
1560 lbf, 6939.226 N
Paint type
White epoxy
Paint/coating
White
Power Rating
0.76 HP input
Rated torque output
801 in/lb, 801.0 in/lb
Ratio
40:1 reduction
Seal type
Single-lip contact
Shaft diameter output
1.0000 in, 25.4 mm
Shaft length output
2.1100 in, 53.594 mm
Suitable for washdown
No
Thermal horsepower rating
1.2900 hp, 0.962 kW
Torque
801 in-lb output capacity
Specifications
- Catalog Number: 20Q40R56WP
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 40:1
- Output Style: Right Side Solid Output Shaft
- Output Shaft Diameter: 1"
- Input Style: Quill
- Frame: 56C
- Center Distance: 2"
- Case Size: 20
- Housing Material: Cast Iron
- Paint: White
- Weight: 30.0000 lb
SKU: 115894
Excellent
We recently purchased a 30-year old hydroseeder and have no manuals or parts diagrams for it. The manufacturer is since out of business and there is very limited information on line. The most critical part we needed was a Dodge part. The original part was clearly marked with the Dodge name and part number. MRO was quickly able to identify the replacement part and we had in hand in two days. Perfect fit. Thank you MRO Supply for helping make our machine functional.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 5005293
Dodge conveyor bushings
The right part, in stock, easy to find, quickly shipped.
Read moreHow should I store a Dodge gearbox over the off-season?
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails?
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands?
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
#1339574
Brand
Electra/Grove Gear
Model
GRG8210128.00
#2288181
Brand
Browning
Model
1012889
#2288239
Brand
Browning
Model
1012822
#2288265
Brand
Browning
Model
1012830
#2288207
Brand
Browning
Model
1012897
#2288206
Brand
Browning
Model
1012814
#2288320
Brand
Browning
Model
1012855
#1341610
Brand
Electra/Grove Gear
Model
GRL8210128.00
SKU: 115894
Excellent
We recently purchased a 30-year old hydroseeder and have no manuals or parts diagrams for it. The manufacturer is since out of business and there is very limited information on line. The most critical part we needed was a Dodge part. The original part was clearly marked with the Dodge name and part number. MRO was quickly able to identify the replacement part and we had in hand in two days. Perfect fit. Thank you MRO Supply for helping make our machine functional.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 5005293
Dodge conveyor bushings
The right part, in stock, easy to find, quickly shipped.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/