We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 17Q60H56 TIGEAR-2 worm gear speed reducer, 60:1 ratio, quill input, hollow bore output, 1.7" center distance, 56C frame, cast iron housing, 0.43 HP input, 576 in-lb torque output, green paint finish. - Ratio: 60:1
- Center Distance: 1.7"
- Input: 56C Flange
- Output Bore/Shaft Diameter: 1"
- Output: Hollow Bore
- Paint/Coating: Green
- Housing Material: Cast Iron
- Housing Material: Cast Iron
- Input Horse Power: 0.43
- Output Horse Power: 0.27
MODEL 17Q60H56
Contact supplier for technical support on: +1-864-284-5700
$1,020.11 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Base to output center height
1.9900 in, 50.546 mm
Bore dia output
1.0000 in, 25.4 mm
Bore length
5.4100 in, 137.414 mm
Case size
17
Center distance (in)
1.7 in, Center distance (in):1.7500 in, 44.45 mm
Finish
Green
Horsepower rating input
0.4300 hp, 0.321 kW
Horsepower rating output
0.2700 hp, 0.201 kW
Housing material
Cast iron
Input
56C flange
Input flange
56C
Input HP
0.43
Input style
Quill
Lubrication type
PAG, standard temperature
Material
Class 30 grey iron
Max RPM
29 rpm
Motor compatibility
NEMA motor, 56C frame
Mounting bolt pattern length
4.1900 in, 106.426 mm
Mounting bolt pattern width
2.7500 in, 69.85 mm
Nominal ratio
60
Output
Hollow bore
Output bore/shaft diameter
1 in
Output horse power
0.27
Output shaft
Hollow
Output shaft center to input motor mounting face distance
4.9000 in, 124.46 mm
Output style
Hollow
Overhung load
1190 lbf, 5293.384 N
Paint type
Standard
Paint/coating
Green
Rated torque output
576 in/lb, 576.0 in/lb
Ratio
60 to 1
Seal type
Single-lip contact
Suitable for washdown
No
Thermal horsepower rating
0.8000 hp, 0.597 kW
- Gear Type: Worm gear, right-angle configuration
- Ratio: 60:1 reduction ratio
- Input: Quill input design for compact installation
- Output: Hollow bore for direct shaft mounting
- Frame: 56C NEMA C-face motor flange
- Center Distance: 1.7" for size 17 case
- Housing: Cast iron construction with green paint finish
- Capacity: 0.43 HP input, 576 in-lb output torque
- Applications: Conveyors, mixers, material handling equipment requiring high torque at low speed
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read more
#151515
Brand
Dodge
Model
17Q60H56WP
#143939
Brand
Dodge
Model
17A60H56
#6000086
Brand
Winsmith
Model
U1860HE56
#151933
Brand
Dodge
Model
17A60H56WP
#142460
Brand
Dodge
Model
17Q60H56
#143939
Brand
Dodge
Model
17A60H56
#151933
Brand
Dodge
Model
17A60H56WP
#151515
Brand
Dodge
Model
17Q60H56WP
#6000086
Brand
Winsmith
Model
U1860HE56
| Brand | MROSupply Fasteners |
| Model | FSTPCK-581795 |
| Brand | SMC |
| Model | JMGPM12-100 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-877216 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-606040 |
| Brand | PEER Bearing |
| Model | 6807-2RS |
| Brand | Gates Rubber |
| Model | 232-2MGT-06 |
| Brand | Dixon |
| Model | CF400-9SS |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-489154 |
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/