We never sell your data to third parties
Dodge 23Q40H56 TIGEAR-2 worm gear speed reducer, 40:1 ratio, quill input, hollow bore output, 56C frame, 2.3" center distance. Cast iron housing with 1.4375" output bore, 1.11 HP input rating, 44 rpm maximum output speed. Maintenance-free synthetic lubricant, green paint finish.
MODEL 23Q40H56
Contact supplier for technical support on: +1-864-284-5700
$1,324.70 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
#142487
Brand
Dodge
Model
23Q40H56
#142501
Brand
Dodge
Model
23Q40H56WP
#144022
Brand
Dodge
Model
23A40H56WP
#5009267
Brand
Dodge
Model
23Q40H56SHWP
Base to output center height
2.5000 in, 63.5 mm
Bore dia output
1.4380 in, 36.525 mm
Bore length
6.6200 in, 168.148 mm
Case size
23
Center Distance
2.3"
Center distance (in)
2.3 in, Center distance (in):2.3100 in, 58.674 mm
Finish
Green
Frame Size
56C NEMA motor flange compatibility
Horsepower rating input
1.1100 hp, 0.828 kW
Horsepower rating output
0.8300 hp, 0.619 kW
Housing
Cast iron
Housing material
Cast iron
Input
56C flange
Input flange
56C
Input HP
1.11
Input style
Quill
Input Type
Quill input
Lubrication
Factory-filled synthetic lubricant
Lubrication type
PAG, standard temperature
Material
Class 30 grey iron
Max RPM
44 rpm
Motor compatibility
NEMA motor, 56C frame
Mounting bolt pattern length
5.0000 in, 127.0 mm
Mounting bolt pattern width
2.8800 in, 73.152 mm
Nominal ratio
40
Output
1.4375" hollow bore
Output bore/shaft diameter
1.4375 in
Output horse power
0.83
Output shaft
Hollow
Output shaft center to input motor mounting face distance
5.4600 in, 138.684 mm
Output style
Hollow
Overhung load
1610 lbf, 7161.637 N
Paint type
Standard
Paint/coating
Green
Power Rating
1.11 HP input capacity
Rated torque output
1193 in/lb, 1193.0 in/lb
Ratio
40:1 reduction ratio with 43.75 RPM output
Seal type
Single-lip contact
Suitable for washdown
No
Thermal horsepower rating
1.7300 hp, 1.29 kW
Torque Rating
1193 in-lb output torque capacity
Specifications
- Catalog Number: 23Q40H56
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 40:1
- Output Style: Hollow Bore
- Output Shaft Diameter: 1.4375"
- Input Style: Quill
- Frame: 56C
- Center Distance: 2.3"
- Case Size: 23
- Housing Material: Cast Iron
- Paint: Green
- Weight: 48.0000 lb
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 117408
P90 coupler
These where a perfect match saved me time and money by getting them fro you guys
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 117869
Great price/great product
Shipping was fast and the price was best I could find. Product was new in a the sealed Dodge box. Perfect.
Read moreHow should I store a Dodge gearbox over the off-season?
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails?
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands?
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
#6000698
Brand
Winsmith
Model
U2440HM56
| Brand | TURNER |
| Model | TRN FS215 |
| Brand | AMI Bearings |
| Model | UCHPL206-20MZ2W |
| Brand | TURNER |
| Model | TRN FJT211 |
| Brand | MARINER |
| Model | MRN SNCSTM207 20 |
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 117408
P90 coupler
These where a perfect match saved me time and money by getting them fro you guys
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 117869
Great price/great product
Shipping was fast and the price was best I could find. Product was new in a the sealed Dodge box. Perfect.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/