We never sell your data to third parties
Dodge 26A10R14 TIGEAR-2 worm gear speed reducer with 10:1 ratio, 3-piece coupled input, right side solid output shaft, 140TC motor flange, and 2.6" center distance. Cast iron housing with green paint, rated for 4.83 HP input and 4.37 HP output. Output shaft diameter is 1.25". Suitable for moderate-duty applications requiring right-angle speed reduction.
MODEL 26A10R14
Contact supplier for technical support on: +1-864-284-5700
$1,499.44 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Base to output center height
2.8700 in, 72.898 mm
Case size
26
Center Distance
2.6"
Center distance (in)
2.6 in, Center distance (in):2.6300 in, 66.802 mm
Center to end of shaft distance
5.6300 in, 143.002 mm
Finish
Green
Frame
140TC NEMA motor flange
Gear Type
Worm gear, right-angle
Gearbox component type
Gearbox
Horsepower rating input
4.8300 hp, 3.602 kW
Horsepower rating output
4.3700 hp, 3.259 kW
Housing
Cast iron
Housing material
Cast iron
Input
3-piece coupled
Input flange
140TC
Input HP
4.83
Input style
3-Piece coupled
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 140TC frame
Mounting bolt pattern length
6.3800 in, 162.052 mm
Mounting bolt pattern width
3.3800 in, 85.852 mm
Nominal ratio
10
Output
Right side solid shaft, 1.1250" diameter
Output bore/shaft diameter
1.25 in
Output horse power
4.37
Output shaft
Right (solid B)
Output shaft center to input motor mounting face distance
8.6100 in, 218.694 mm
Output style
Right
Overhung load
1610 lbf, 7161.637 N
Paint type
Standard
Paint/coating
Green
Power Rating
4.83 HP input capacity
Rated torque output
1576 in/lb, 1576.0 in/lb
Ratio
10:1 reduction
Seal type
Single-lip contact
Shaft diameter output
1.1250 in, 28.575 mm
Shaft length output
2.6700 in, 67.818 mm
Suitable for washdown
No
Thermal horsepower rating
5.6100 hp, 4.183 kW
Torque
1, 576 in-lb output torque
Specifications
- Catalog Number: 26A10R14
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 10:1
- Output Style: Right Side Solid Output Shaft
- Output Shaft Diameter: 1.25"
- Input Style: 3-Piece Coupled
- Frame: 140TC
- Center Distance: 2.6"
- Case Size: 26
- Housing Material: Cast Iron
- Paint: Green
- Weight: 69.0000 lb
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 118299
Prompt & great service
As usual MRO Supply team are quick in shipping the ordered parts correctly without any delay.. Will shop online again confidently knowing they offer very good and prompt service!
Read moreSKU: 127693
Re-seller discount needed
Quick delivery, but I think you should raise your prices for end users and lower your prices for resellers like myself!
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreHow should I store a Dodge gearbox over the off-season?
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails?
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands?
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
#5009419
Brand
Dodge
Model
26A12R56
#5009565
Brand
Dodge
Model
26Q18LR56
#151416
Brand
Dodge
Model
26A07L56
#5009451
Brand
Dodge
Model
26A18R56
#151581
Brand
Dodge
Model
26BASE
#1342526
Brand
Electra/Grove Gear
Model
GRL8260195.00
#1342430
Brand
Electra/Grove Gear
Model
GRL8260099.00
#1342538
Brand
Electra/Grove Gear
Model
GRL8260207.00
#1342418
Brand
Electra/Grove Gear
Model
GRL8260087.00
#6000976
Brand
Winsmith
Model
U2610SR14
#6000968
Brand
Winsmith
Model
U2610SB14
| Brand | Pyramex |
| Model | NHCX2 |
| Brand | Royal Products |
| Model | 10782 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-409061 |
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 118299
Prompt & great service
As usual MRO Supply team are quick in shipping the ordered parts correctly without any delay.. Will shop online again confidently knowing they offer very good and prompt service!
Read moreSKU: 127693
Re-seller discount needed
Quick delivery, but I think you should raise your prices for end users and lower your prices for resellers like myself!
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/