We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 26AZ40L56WP TIGEAR-2 E-Z Kleen worm gear speed reducer with 40:1 ratio, left side solid output shaft, 56C motor flange, 2.6" center distance, 3-piece coupled input. White epoxy paint finish for food/washdown environments. 1.55 HP input, 1685 in-lb - Ratio: 40:1
- Center Distance: 2.6"
- Input: 56C Flange
- Output Bore/Shaft Diameter: 1.25"
- Output: Left Side Solid Output Shaft
- Paint/Coating: White
- Housing Material: Cast Iron
- Housing Material: Cast Iron
- Input Horse Power: 1.55
- Output Horse Power: 1.17
MODEL 26AZ40L56WP
Contact supplier for technical support on: +1-864-284-5700
$2,250.19 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Base to output center height
2.8700 in, 72.898 mm
Case size
26
Center distance (in)
2.6 in, Center distance (in):2.6300 in, 66.802 mm
Center to end of shaft distance
5.6300 in, 143.002 mm
Finish
White epoxy
Gearbox component type
Gearbox
Horsepower rating input
1.5500 hp, 1.156 kW
Horsepower rating output
1.1700 hp, 0.872 kW
Housing material
Cast iron
Input
56C flange
Input flange
56C
Input HP
1.55
Input style
3-Piece coupled
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 56C frame
Mounting bolt pattern length
6.3800 in, 162.052 mm
Mounting bolt pattern width
3.3800 in, 85.852 mm
Nominal ratio
40
Output
Left side solid output shaft
Output bore/shaft diameter
1.25 in
Output horse power
1.17
Output shaft center to input motor mounting face distance
8.6100 in, 218.694 mm
Output style
Left
Overhung load
1610 lbf, 7161.637 N
Paint type
White epoxy
Paint/coating
White
Rated torque output
1685 in/lb, 1685.0 in/lb
Ratio
40 to 1
Seal type
Two-piece harsh duty
Shaft diameter output
1.1250 in, 28.575 mm
Shaft length output
2.6700 in, 67.818 mm
Suitable for washdown
Yes
Thermal horsepower rating
2.1400 hp, 1.596 kW
- Gear Type: Worm gear, right-angle configuration
- Ratio: 40:1 reduction
- Input: 3-piece coupled with 56C motor flange
- Output: Left side solid shaft, 1.1250" diameter
- Center Distance: 2.6" (case size 26)
- Housing: Cast iron with white epoxy E-Z Kleen finish
- Power Rating: 1.55 HP input, 1685 in-lb torque output
- Applications: Food processing, pharmaceutical, washdown environments requiring sanitary design and corrosion resistance
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 118299
Prompt & great service
As usual MRO Supply team are quick in shipping the ordered parts correctly without any delay.. Will shop online again confidently knowing they offer very good and prompt service!
Read more
#5009496
Brand
Dodge
Model
26Q05L56WP
#152098
Brand
Dodge
Model
26AZ05LR56WP
#153466
Brand
Dodge
Model
26AZ18LR14WP
#142646
Brand
Dodge
Model
26ZBASEWP
#144571
Brand
Dodge
Model
26AZ30L56WP
#144635
Brand
Dodge
Model
26QZ40L56WP
#145120
Brand
Dodge
Model
26QZ40L56
#144389
Brand
Dodge
Model
26AZ40L56
#5999342
Brand
Winsmith
Model
M2640SL56
| Brand | Gates Rubber |
| Model | 8/8V1700 |
| Brand | Harwal |
| Model | 22x35x07B NBR |
| Brand | Bestorq |
| Model | 10/5VK1250 |
| Brand | Gates Rubber |
| Model | 12/BX158 |
| Brand | Bestorq |
| Model | 15/5VK2120 |
| Brand | Saginaw Control |
| Model | SCE-HWK1216SS |
| Brand | Dixon |
| Model | GLSC415 |
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 118299
Prompt & great service
As usual MRO Supply team are quick in shipping the ordered parts correctly without any delay.. Will shop online again confidently knowing they offer very good and prompt service!
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/