MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
Dodge 26Q07R14WP 7:1 Ratio Right Side Solid Output Shaft 140TC Flange 2.6" Center Distance White Paint - Ratio: 7:1
- Center Distance: 2.6"
- Input: 140TC Flange
- Output Bore/Shaft Diameter: 1.25"
- Output: Right Side Solid Output Shaft
- Paint/Coating: White
- Housing Material: Cast Iron
- Housing Material: Cast Iron
- Input Horse Power: 5.92
- Output Horse Power: 5.47
MODEL 26Q07R14WP
Contact supplier for technical support on: +1-864-284-5700
$1,420.70 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Typically Ships in: 1 day
Returnable:No
Base to output center height
2.8700 in, 72.898 mm
Case size
26
Center distance (in)
2.6 in, Center distance (in):2.6300 in, 66.802 mm
Center to end of shaft distance
5.6300 in, 143.002 mm
Finish
White epoxy
Gearbox component type
Gearbox
Horsepower rating input
5.9200 hp, 4.415 kW
Horsepower rating output
5.4700 hp, 4.079 kW
Housing material
Cast iron
Input
140TC flange
Input flange
140TC
Input HP
5.92
Input style
Quill
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 140TC frame
Mounting bolt pattern length
6.3800 in, 162.052 mm
Mounting bolt pattern width
3.3800 in, 85.852 mm
Nominal ratio
7
Output
Right side solid output shaft
Output bore/shaft diameter
1.25 in
Output horse power
5.47
Output shaft center to input motor mounting face distance
5.4900 in, 139.446 mm
Output style
Right
Overhung load
1520 lbf, 6761.297 N
Paint type
White epoxy
Paint/coating
White
Rated torque output
1458 in/lb, 1458.0 in/lb
Ratio
7 to 1
Seal type
Single-lip contact
Shaft diameter output
1.1250 in, 28.575 mm
Shaft length output
2.6700 in, 67.818 mm
Suitable for washdown
No
Thermal horsepower rating
6.8900 hp, 5.138 kW
Speed Reducers The Dodge 26Q07R14WP is a high-performance speed reducer designed to enhance efficiency and reliability in various industrial applications. This solid output shaft features a right-side configuration and a 7:1 gear ratio, making it an ideal choice for operations requiring precise speed control and torque multiplication.
Key Features
| Gear Ratio | 7:1, providing significant speed reduction for improved operational efficiency. |
|---|---|
| Flange Type | 140TC flange ensures compatibility with a wide range of mounting configurations. |
| Center Distance | 2.6 inches, optimized for compact installations and effective power transmission. |
| Construction | Durable solid output shaft for enhanced strength and longevity in demanding environments. |
| Finish | Coated with white paint for corrosion resistance and improved visibility during maintenance. |
Applications
| Industrial Machinery | Perfect for conveyors, mixers, and other equipment requiring reliable speed reduction. |
|---|---|
| Automotive | Suitable for applications in automotive assembly lines and testing equipment. |
| Material Handling | Efficiently utilized in lifting systems and automated storage solutions. |
| Compatibility | Designed to integrate seamlessly with existing Dodge systems and various industrial components. |
Benefits
| Enhanced Performance | The 7:1 ratio allows for optimal performance in applications demanding high torque and lower speeds. |
|---|---|
| Durability | Built to withstand rigorous operational conditions, ensuring longevity and reduced maintenance costs. |
| Versatility | The solid output shaft design provides flexibility for various configurations and applications, making it a valuable addition to any industrial setup. |
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read more
#142658
Brand
Dodge
Model
26ZJMOUNTWP
#144577
Brand
Dodge
Model
26QZ12R56WP
#144585
Brand
Dodge
Model
26QZ18R14WP
#142646
Brand
Dodge
Model
26ZBASEWP
#5009528
Brand
Dodge
Model
26Q12L56WP
#142047
Brand
Dodge
Model
26Q07R14
#143312
Brand
Dodge
Model
26A07R14
#143333
Brand
Dodge
Model
26A07R14WP
#6000936
Brand
Winsmith
Model
U2608SR14
| Brand | Electra/Grove Gear |
| Model | 707059L |
| Brand | Dodge |
| Model | 26A12L14 |
| Brand | Electra/Grove Gear |
| Model | 707702L |
| Brand | Precision Twist Drill |
| Model | SM-50DC |
| Brand | Dodge |
| Model | E392120 |
| Brand | Dodge |
| Model | 17QZ15LR56WP |
| Brand | PTI |
| Model | IS-08B-1-18T |
| Brand | Winsmith |
| Model | M1815SB56 |
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/