We never sell your data to third parties
Dodge 26S40L TIGEAR-2 worm gear speed reducer with 40:1 ratio, left side solid output shaft, and solid input shaft. 2.6" center distance, cast iron housing, green paint. 1.55 HP input rating, 1.17 HP output, 0.875" input shaft diameter, 1.25" output shaft diameter. Suitable for steady load applications up to 10 hours per day.
MODEL 26S40L
Contact supplier for technical support on: +1-864-284-5700
$1,225.93 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
#149601
Brand
Dodge
Model
26S40LWP
#143297
Brand
Dodge
Model
26S40LR
#151581
Brand
Dodge
Model
26BASE
#149917
Brand
Dodge
Model
26S40L
Base to output center height
2.8700 in, 72.898 mm
Case size
26
Center Distance
2.6 inches
Center distance (in)
2.6 in, Center distance (in):2.6300 in, 66.802 mm
Center to end of shaft distance
5.6300 in, 143.002 mm
Finish
Green
Gearbox component type
Gearbox
Horsepower rating input
1.5500 hp, 1.156 kW
Horsepower rating output
1.1700 hp, 0.872 kW
Housing
Cast iron
Housing material
Cast iron
Input
0.875 in Input Shaft
Input HP
1.55
Input style
Separate, Input style:Solid input shaft
Input Type
Separate shaft (belt-driven)
Lubrication
Factory filled synthetic lubricant
Lubrication type
PAG, standard temperature
Mounting bolt pattern length
6.3800 in, 162.052 mm
Mounting bolt pattern width
3.3800 in, 85.852 mm
Nominal ratio
40
Output
Left side solid output shaft
Output bore/shaft diameter
1.25 in
Output Configuration
Left side solid shaft, 1.1250 inch diameter
Output horse power
1.17
Output shaft
Left (solid A)
Output style
Left
Output Torque
1, 685 in-lb
Overhung load
1610 lbf, 7161.637 N
Paint type
Standard
Paint/coating
Green
Power Rating
1.55 HP input
Rated torque output
1685 in/lb, 1685.0 in/lb
Ratio
40 to 1
Reduction Ratio
40:1
Seal type
Single-lip contact
Shaft dia input
0.8750 in
Shaft diameter output
1.1250 in, 28.575 mm
Shaft length input
1.1700 in, 29.718 mm
Shaft length output
2.6700 in, 67.818 mm
Suitable for washdown
No
Thermal horsepower rating
2.1400 hp, 1.596 kW
Specifications
- Catalog Number: 26S40L
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 40:1
- Output Style: Left Side Solid Output Shaft
- Output Shaft Diameter: 1.25"
- Input Style: Separate
- Center Distance: 2.6"
- Case Size: 26
- Housing Material: Cast Iron
- Paint: Green
- Weight: 50.0000 lb
How should I store a Dodge gearbox over the off-season?
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails?
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands?
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
#6001171
Brand
Winsmith
Model
U2640SL00
| Brand | JW Winco |
| Model | 300-KT-78-M8-16-SW |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/