We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 35A20R18 TIGEAR-2 worm gear speed reducer with 20:1 ratio, 3-piece coupled input, right side solid output shaft (1.5" diameter), 180TC C-face frame, 3.5" center distance. Cast iron housing, 5.79 HP rating, 3620 in-lb torque. - Ratio: 20:1
- Center Distance: 3.5"
- Input: 180TC Flange
- Output Bore/Shaft Diameter: 1.5"
- Output: Right Side Solid Output Shaft
- Paint/Coating: Green
- Housing Material: Cast Iron
- Housing Material: Cast Iron
- Input Horse Power: 5.79
- Output Horse Power: 5.03
MODEL 35A20R18
Contact supplier for technical support on: +1-864-284-5700
$2,587.93 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Base to output center height
3.9900 in, 101.346 mm
Case size
35
Center distance (in)
3.5 in, Center distance (in):3.5000 in, 88.9 mm
Center to end of shaft distance
7.0600 in, 179.324 mm
Finish
Green
Gearbox component type
Gearbox
Horsepower rating input
5.7900 hp, 4.318 kW
Horsepower rating output
5.0300 hp, 3.751 kW
Housing material
Cast iron
Input
180TC flange
Input flange
180TC
Input HP
5.79
Input style
3-Piece coupled
Lubrication type
PAG, standard temperature
Material
Class 30 grey iron
Max RPM
88 rpm
Motor compatibility
NEMA motor, 180TC frame
Mounting bolt pattern length
7.5000 in, 190.5 mm
Mounting bolt pattern width
4.0000 in, 101.6 mm
Nominal ratio
20
Output
Right side solid output shaft
Output bore/shaft diameter
1.5 in
Output horse power
5.03
Output shaft
Right (solid B)
Output shaft center to input motor mounting face distance
11.1500 in, 283.21 mm
Output style
Right
Overhung load
2760 lbf, 12277.092 N
Paint type
Standard
Paint/coating
Green
Rated torque output
3620 in/lb, 3620.0 in/lb
Ratio
20 to 1
Seal type
Single-lip contact
Shaft diameter output
1.5000 in, 38.1 mm
Shaft length output
3.5100 in, 89.154 mm
Suitable for washdown
No
Thermal horsepower rating
5.9700 hp, 4.452 kW
- Ratio: 20:1 reduction
- Input Type: 3-piece coupled (allows motor separation)
- Output: Right side solid shaft, 1.5000" diameter
- Frame: 180TC C-face motor flange
- Center Distance: 3.5" worm gear geometry
- Power Rating: 5.79 HP input capacity
- Torque Output: 3,620 in-lb
- Housing: Cast iron, maintenance-free design
- Applications: Belt conveyors, mixers, pumps requiring right-angle drive
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read more
#151849
Brand
Dodge
Model
35A20R18
#143582
Brand
Dodge
Model
35S30LR
#143538
Brand
Dodge
Model
35A05R21
#142262
Brand
Dodge
Model
35Q15L14
#142259
Brand
Dodge
Model
35Q10LR14
| Brand | E-T-A |
| Model | X4230-FA1BL-AC120V |
| Brand | Tingley |
| Model | H53237-M |
| Brand | Siemens Controls |
| Model | 3RV1742-5ED10 |
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/