We never sell your data to third parties
Dodge 17QZ10LR56 TIGEAR-2 E-Z Kleen worm gear speed reducer with 10:1 ratio, quill input, double solid output shafts, 56C flange, and 1.7" center distance. Cast iron housing with green paint. 1.67 HP input, 1.48 HP output, 0.875" output shaft diameter. Silver-gray epoxy finish.
MODEL 17QZ10LR56
Contact supplier for technical support on: +1-864-284-5700
$1,301.91 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
#144899
Brand
Dodge
Model
17AZ15LR56
#144362
Brand
Dodge
Model
17QZ07L56
#142639
Brand
Dodge
Model
17ZBASE
#144844
Brand
Dodge
Model
17AZ05R56
Base to output center height
1.9900 in, 50.546 mm
Case size
17
Center Distance
1.7"
Center distance (in)
1.7 in, Center distance (in):1.7500 in, 44.45 mm
Center to end of shaft distance
4.3100 in, 109.474 mm
Finish
Silver-gray epoxy
Frame
56C NEMA flange
Gear Type
Worm gear, right-angle
Horsepower rating input
1.6700 hp, 1.245 kW
Horsepower rating output
1.4800 hp, 1.104 kW
Housing
Cast iron
Housing material
Cast iron
Input
Quill input
Input flange
56C
Input HP
1.67
Input style
Quill
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 56C frame
Mounting bolt pattern length
4.1900 in, 106.426 mm
Mounting bolt pattern width
2.7500 in, 69.85 mm
Nominal ratio
10
Output
Double solid output shafts (0.8750" diameter)
Output bore/shaft diameter
0.875 in
Output horse power
1.48
Output shaft
Double (solid)
Output shaft center to input motor mounting face distance
4.9000 in, 124.46 mm
Output style
Left, right
Overhung load
1190 lbf, 5293.384 N
Paint type
Stainless epoxy
Paint/coating
Green
Performance
1.67 HP input rating, 534 in-lb torque output
Rated torque output
534 in/lb, 534.0 in/lb
Ratio
10:1 reduction
Seal type
Two-piece harsh duty
Shaft diameter output
0.8750 in, 22.225 mm
Shaft length output
1.7400 in, 44.196 mm
Special Features
E-Z Kleen variant
Suitable for washdown
Yes
Thermal horsepower rating
2.7600 hp, 2.058 kW
Specifications
- Catalog Number: 17QZ10LR56
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 10:1
- Output Style: Double Solid Output Shaft
- Output Shaft Diameter: 0.875"
- Input Style: Quill
- Frame: 56C
- Center Distance: 1.7"
- Case Size: 17
- Housing Material: Cast Iron
- Paint: Green
- Weight: 43.0000 lb
SKU: 115894
Excellent
We recently purchased a 30-year old hydroseeder and have no manuals or parts diagrams for it. The manufacturer is since out of business and there is very limited information on line. The most critical part we needed was a Dodge part. The original part was clearly marked with the Dodge name and part number. MRO was quickly able to identify the replacement part and we had in hand in two days. Perfect fit. Thank you MRO Supply for helping make our machine functional.
Read moreHow should I store a Dodge gearbox over the off-season?
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails?
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands?
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
#5998460
Brand
Winsmith
Model
M1810SB56
SKU: 115894
Excellent
We recently purchased a 30-year old hydroseeder and have no manuals or parts diagrams for it. The manufacturer is since out of business and there is very limited information on line. The most critical part we needed was a Dodge part. The original part was clearly marked with the Dodge name and part number. MRO was quickly able to identify the replacement part and we had in hand in two days. Perfect fit. Thank you MRO Supply for helping make our machine functional.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/