We never sell your data to third parties
Dodge 13AZ20R56WP TIGEAR-2 E-Z Kleen worm gear speed reducer with 20:1 ratio, 3-piece coupled input, right side solid output shaft, 56C flange, and 1.3" center distance. Cast iron housing with white epoxy finish. Input horsepower 0.53, output horsepower 0.42, output shaft diameter 0.625". Suitable for washdown and food-grade environments requiring corrosion resistance.
MODEL 13AZ20R56WP
Contact supplier for technical support on: +1-864-284-5700
$1,210.05 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
#5003602
Brand
Dodge
Model
13A07R14WP
#152315
Brand
Dodge
Model
13AZ20R56WP
#145330
Brand
Dodge
Model
13QZ30LR56WP
#152317
Brand
Dodge
Model
13AZ30LR56WP
Base to output center height
1.7100 in, 43.434 mm
Case size
13
Center Distance
1.33" compact case size 13
Center distance (in)
1.3 in, Center distance (in):1.3300 in, 33.782 mm
Center to end of shaft distance
4.0000 in, 101.6 mm
Finish
White epoxy
Frame
56C NEMA motor flange compatibility
Gear Type
Right-angle worm gear reduction
Gearbox component type
Gearbox
Horsepower rating input
0.5300 hp, 0.395 kW
Horsepower rating output
0.4200 hp, 0.313 kW
Housing
Cast iron
Housing material
Cast iron
Input
3-piece coupled input
Input flange
56C
Input HP
0.53
Input style
3-Piece coupled
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 56C frame
Mounting bolt pattern length
3.2500 in, 82.55 mm
Mounting bolt pattern width
2.0000 in, 50.8 mm
Nominal ratio
20
Output
Right side solid output shaft, 5/8" diameter
Output bore/shaft diameter
0.625 in
Output horse power
0.42
Output shaft center to input motor mounting face distance
7.2200 in, 183.388 mm
Output style
Right
Overhung load
650 lbf, 2891.344 N
Paint type
White epoxy
Paint/coating
White
Power Rating
0.53 HP input, 304 in-lb output torque
Rated torque output
304 in/lb, 304.0 in/lb
Ratio
20:1 speed reduction
Seal type
Two-piece harsh duty
Shaft diameter output
0.6250 in, 15.875 mm
Shaft length output
1.9000 in, 48.26 mm
Suitable for washdown
Yes
Thermal horsepower rating
1.0600 hp, 0.79 kW
Specifications
- Catalog Number: 13AZ20R56WP
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 20:1
- Output Style: Right Side Solid Output Shaft
- Output Shaft Diameter: 0.625"
- Input Style: 3-Piece Coupled
- Frame: 56C
- Center Distance: 1.33"
- Case Size: 13
- Housing Material: Cast Iron
- Paint: White
- Weight: 39.0000 lb
SKU: 115894
Excellent
We recently purchased a 30-year old hydroseeder and have no manuals or parts diagrams for it. The manufacturer is since out of business and there is very limited information on line. The most critical part we needed was a Dodge part. The original part was clearly marked with the Dodge name and part number. MRO was quickly able to identify the replacement part and we had in hand in two days. Perfect fit. Thank you MRO Supply for helping make our machine functional.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreHow should I store a Dodge gearbox over the off-season?
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails?
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands?
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
#5998407
Brand
Winsmith
Model
M1320SR56
| Brand | Bridgeport |
| Model | RWH-1 |
SKU: 115894
Excellent
We recently purchased a 30-year old hydroseeder and have no manuals or parts diagrams for it. The manufacturer is since out of business and there is very limited information on line. The most critical part we needed was a Dodge part. The original part was clearly marked with the Dodge name and part number. MRO was quickly able to identify the replacement part and we had in hand in two days. Perfect fit. Thank you MRO Supply for helping make our machine functional.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/