We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 23QZ15LR56WP TIGEAR-2 E-Z Kleen worm gear speed reducer, 15:1 ratio, quill input, double solid output shaft, 56C frame, 2.3" center distance, white paint. Cast iron housing, 2.57 HP input, 1199 in-lb torque output. - Ratio: 15:1
- Center Distance: 2.3"
- Input: 56C Flange
- Output Bore/Shaft Diameter: 1.25"
- Output: Double Solid Output Shaft
- Paint/Coating: White
- Housing Material: Cast Iron
- Housing Material: Cast Iron
- Input Horse Power: 2.57
- Output Horse Power: 2.22
MODEL 23QZ15LR56WP
Contact supplier for technical support on: +1-864-284-5700
$1,712.85 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Base to output center height
2.5000 in, 63.5 mm
Case size
23
Center distance (in)
2.3 in, Center distance (in):2.3100 in, 58.674 mm
Center to end of shaft distance
5.1400 in, 130.556 mm
Finish
White epoxy
Horsepower rating input
2.5700 hp, 1.916 kW
Horsepower rating output
2.2200 hp, 1.655 kW
Housing material
Cast iron
Input
56C flange
Input flange
56C
Input HP
2.57
Input style
Quill
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 56C frame
Mounting bolt pattern length
5.0000 in, 127.0 mm
Mounting bolt pattern width
2.8800 in, 73.152 mm
Nominal ratio
15
Output
Double solid output shaft
Output bore/shaft diameter
1.25 in
Output horse power
2.22
Output shaft center to input motor mounting face distance
5.4600 in, 138.684 mm
Output style
Left, right
Overhung load
1610 lbf, 7161.637 N
Paint type
White epoxy
Paint/coating
White
Rated torque output
1199 in/lb, 1199.0 in/lb
Ratio
15 to 1
Seal type
Two-piece harsh duty
Shaft diameter output
1.1250 in, 28.575 mm
Shaft length output
2.1800 in, 55.372 mm
Suitable for washdown
Yes
Thermal horsepower rating
3.3000 hp, 2.461 kW
- Reducer Family: TIGEAR-2 E-Z Kleen
- Gear Type: Single-worm right angle
- Ratio: 15:1
- Input Style: Quill (most compact configuration)
- Output: Double solid shaft (left and right side)
- Frame: 56C motor flange compatibility
- Center Distance: 2.3" case size
- Housing: Cast iron class 30
- Paint: White epoxy for food/washdown environments
- Power Rating: 2.57 HP input, 1199 in-lb output torque
- Applications: Food processing, pharmaceutical, washdown environments requiring sanitary design
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read more
#152047
Brand
Dodge
Model
23QZ05LR14WP
#152363
Brand
Dodge
Model
23QZ15LR56WP
#142657
Brand
Dodge
Model
23ZJMOUNTWP
#5009183
Brand
Dodge
Model
23Q04L14WP
#142645
Brand
Dodge
Model
23ZBASEWP
#145036
Brand
Dodge
Model
23QZ15LR56
#152088
Brand
Dodge
Model
23AZ15LR56WP
#145007
Brand
Dodge
Model
23AZ15LR56
#5998884
Brand
Winsmith
Model
M2415SB56
| Brand | MROSupply Fasteners |
| Model | FSTPCK-242211 |
| Brand | E-Z Lok |
| Model | 260-006-BR |
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/