We never sell your data to third parties
Dodge SS26Q07R56 TIGEAR-2 stainless steel worm gear speed reducer with 7:1 ratio, 2.6" center distance, quill input, right side solid output shaft 1.25" diameter, 56C flange, 5.92 HP input, 5.47 HP output. Cast stainless steel housing for corrosion resistance in washdown and food processing environments. Factory filled with synthetic lubricant, ventless and maintenance-free design.
MODEL SS26Q07R56
Contact supplier for technical support on: +1-864-284-5700
$2,570.04 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
#2248927
Brand
Dodge
Model
SS26Q30R56
#2248901
Brand
Dodge
Model
SS26Q20L14
#2248903
Brand
Dodge
Model
SS26Q20LR14
#2248935
Brand
Dodge
Model
SS26Q40LR56
Base to output center height
2.8700 in, 72.898 mm
Case size
26
Center Distance
2.6"
Center distance (in)
2.6 in, Center distance (in):2.6300 in, 66.802 mm
Center to end of shaft distance
5.6300 in, 143.002 mm
Frame
56C NEMA motor flange compatibility
Gearbox component type
Gearbox
Horsepower rating input
5.9200 hp, 4.415 kW
Horsepower rating output
5.4700 hp, 4.079 kW
Housing material
Stainless steel
Housing Material
Stainless steel
Input
Quill input
Input HP
5.92
Input style
Quill
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 56C frame
Mounting bolt pattern length
0.3800 in, 9.652 mm
Mounting bolt pattern width
6.3800 in, 162.052 mm
Nominal ratio
7
Output
Right side solid shaft 1.125" diameter
Output bore/shaft diameter
1.25 in
Output horse power
5.47
Output shaft center to input motor mounting face distance
5.5100 in, 139.954 mm
Output style
Right
Overhung load
1520 lbf, 6761.297 N
Paint/coating
No
Power Rating
5.92 HP input capacity
Rated torque output
1458 in/lb, 1458.0 in/lb
Ratio
7:1 reduction ratio
Seal type
Two-piece harsh duty
Shaft diameter output
1.1250 in, 28.575 mm
Shaft length output
2.6700 in, 67.818 mm
Suitable for washdown
Yes
Thermal horsepower rating
6.8900 hp, 5.138 kW
Torque
1458 in-lb output torque
Specifications
- Catalog Number: SS26Q07R56
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 7:1
- Output Style: Right Side Solid Output Shaft
- Output Shaft Diameter: 1.25"
- Input Style: Quill
- Frame: 56C
- Center Distance: 2.6"
- Case Size: 26
- Housing Material: Stainless Steel
- Paint: Green
- Weight: 65.0000 lb
SKU: 115894
Excellent
We recently purchased a 30-year old hydroseeder and have no manuals or parts diagrams for it. The manufacturer is since out of business and there is very limited information on line. The most critical part we needed was a Dodge part. The original part was clearly marked with the Dodge name and part number. MRO was quickly able to identify the replacement part and we had in hand in two days. Perfect fit. Thank you MRO Supply for helping make our machine functional.
Read moreSKU: 117776
Purchase review
I received quick replies to any questions; delivery was on time and immediate. I am very satisfied with my experience with MRO Supply.
Read moreSKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreHow should I store a Dodge gearbox over the off-season?
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails?
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands?
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
| Brand | E-Z Lok |
| Model | EZ-R108 |
| Brand | NSK Bearings |
| Model | 6314ZZC3 |
| Brand | Martin Sprocket |
| Model | E 1 7/8 |
| Brand | McGill Bearing |
| Model | PCF 3 |
SKU: 115894
Excellent
We recently purchased a 30-year old hydroseeder and have no manuals or parts diagrams for it. The manufacturer is since out of business and there is very limited information on line. The most critical part we needed was a Dodge part. The original part was clearly marked with the Dodge name and part number. MRO was quickly able to identify the replacement part and we had in hand in two days. Perfect fit. Thank you MRO Supply for helping make our machine functional.
Read moreSKU: 117776
Purchase review
I received quick replies to any questions; delivery was on time and immediate. I am very satisfied with my experience with MRO Supply.
Read moreSKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/