154Q56H30 010

Regal Beloit Morse 154Q56H30 010

UPC: 662288340843 | UNSPSC: 25173800 | GTIN:

Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives

Morse® Raider® Plus Worm Gear Reducer, Single Reduction Standard, 30:1 Gear Ratio, 1 hp, C-Face Quilled Input, Hollow Output, 5/8 in Dia Input, 5/8 in ID Output, 58.3 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 22.69 in-lb Input/58.3 in-lb Output, 1.54 in Centre Distance, 3/16 x 3/32 in Input/3/16 x 1-1/2 in Output Keyway, 80 % Efficiency, Polyglycol Oil Lubrication, Direct/Floor Mount, Cast Iron, 7.13 in L x 4.82 in W x 5.38 in H

Features:

• Rugged cast iron housing provides maximum strength and dependability
• High lead angle worm is case hardened, ground and polished
• Large, single row ball bearings on input shaft to absorb radial and thrust loads at higher input speeds
• Tapered roller bearings are used on output shaft
• Forged bronze worm gears provide optimum balance of strength and wear
• Heavy duty tapered roller bearings on all output shafts
• 56C motor frame size

Specs:

• Input Maximum Speed: 1750 rpm
• Output Maximum Speed: 58.3 rpm
• Centre Distance: 1.54 in
• Input Type: C-Face Quilled
• Output Size: 5/8 in ID
• Input Size: 5/8 in Dia
• Lubrication Type: Polyglycol Oil
• Efficiency: 80 %
• Torque Rating: 22.69 in-lb Input/58.3 in-lb Output
• Horsepower: 1 hp
• Keyway Size: 3/16 x 3/32 in Input/3/16 x 1-1/2 in Output
• Gear Ratio: 30:1
• Output Type: Hollow
• Mounting Type: Direct/Floor
• Dimensions: 7.13 in L x 4.82 in W x 5.38 in H
• Material: Cast Iron
• Type: Single Reduction Standard

Certifications/Standards:

FDA Approved

Warranty:

1 Year