MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
Morse 175Q56H20 100 XD1185 20:1 Ratio 1.75" Center Distance 0.625" Input Bore (C Face) 0.625" Input Diameter C-Face Quill Input 1" Output Diameter Hollow Bore Output Cast Iron Single-Reduction Worm Reducer 20:1 Ratio, 1.75" Center Distance, 0.625" Input Bore (C Face), 0.625" Input Diameter, C-Face Quill Input, 1" Output Diameter, Hollow Bore Output, Cast Iron Single-Reduction Worm Reducer
MODEL XD1185
Contact supplier for technical support on: 800 626 2093
$1,051.44 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Typically Ships in: 1 day
Returnable:No
Center Distance (in)
1.75
Center Distance Range
1" thru 3.25"
Efficiency
80
Frame Size
56C
Gear Ratio
20:1
Gear Type
Worm
Height
11.6
Housing Material
Cast Iron
HP Range
1 to 1-1/2 (< 2)
Input Bore (C Face)
0.625
Input Diameter (in)
0.625
Input HP @ 1750 RPM
1.05
Input Keyway (C Face)
3/16x3/32
Input Speed
1750
Input Style
C-Face Quill
Length
11
Mounting Type
Shaft Mt
No. of Gear Reductions
Single
Output Diameter (in)
1
Output Shaft Direction
L or R
Output Torque Range
500 to 1000 in lbs
Output Torque Rating (in-lb)
630 in-lbs @1750 input RPM
Output Type
Hollow Bore
Overhung Load Rating (Output Shaft(lb))
1200
Product Type
Worm Speed Reducer
Ratio Range
20:1
Reducer Style
Standard
Series Code
Raider
Service Factor
1
Thrust Rating - output shaft
1144
Width
10.4
Regal Beloit Morse 175Q56H20 100
UPC: 662288343967 | UNSPSC: 25173800 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Morse® Raider® Plus Worm Gear Reducer, Single Reduction Standard, 20:1 Gear Ratio, 1 hp, C-Face Quilled Input, Hollow Output, 5/8 in Dia Input, 1 in ID Output, 87.5 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 37.82 in-lb Input/87.5 in-lb Output, 1-3/4 in Centre Distance, 3/16 x 3/32 in Input/1/4 x 1/8 in Output Keyway, 80 % Efficiency, Polyglycol Oil Lubrication, Direct/Floor Mount, Cast Iron, 7.33 in L x 5.5 in W x 5.75 in H
Features:
- Rugged cast iron housing provides maximum strength and dependability
- High lead angle worm is case hardened, ground and polished
- Large, single row ball bearings on input shaft to absorb radial and thrust loads at higher input speeds
- Tapered roller bearings are used on output shaft
- Forged bronze worm gears provide optimum balance of strength and wear
- Heavy duty tapered roller bearings on all output shafts
- 56C motor frame size
Specs:
- Input Maximum Speed: 1750 rpm
- Output Maximum Speed: 87.5 rpm
- Centre Distance: 1-3/4 in
- Input Type: C-Face Quilled
- Output Size: 1 in ID
- Input Size: 5/8 in Dia
- Lubrication Type: Polyglycol Oil
- Efficiency: 80 %
- Torque Rating: 37.82 in-lb Input/87.5 in-lb Output
- Horsepower: 1 hp
- Keyway Size: 3/16 x 3/32 in Input/1/4 x 1/8 in Output
- Gear Ratio: 20:1
- Output Type: Hollow
- Mounting Type: Direct/Floor
- Dimensions: 7.33 in L x 5.5 in W x 5.75 in H
- Material: Cast Iron
- Type: Single Reduction Standard
Certifications/Standards:
FDA Approved
Warranty:
1 Year
| Brand | Hyde Tools |
| Model | 10540 |
| Brand | Dormer Pramet |
| Model | C8351.1/2 |
| Brand | Wiegmann |
| Model | HS442 |
| Brand | Martin Sprocket |
| Model | C1060 |
| Brand | Dormer Pramet |
| Model | 5985624 |
| Brand | Kipp |
| Model | K2127.252184A4X50 |
| Brand | Martin Sprocket |
| Model | GS100 |
| Brand | Peer Chain |
| Model | 50A12H X 5/8-PB |