MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
Morse 175Q56LR40 XD1118 40:1 Ratio 1.75" Center Distance 0.625" Input Bore (C Face) 0.625" Input Diameter C-Face Quill Input 0.875" Output Diameter Solid Shaft Output Cast Iron Single-Reduction Worm Reducer 40:1 Ratio, 1.75" Center Distance, 0.625" Input Bore (C Face), 0.625" Input Diameter, C-Face Quill Input, 0.875" Output Diameter, Solid Shaft Output, Cast Iron Single-Reduction Worm Reducer
MODEL XD1118
Contact supplier for technical support on: 800 626 2093
$798.27 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
Assembly
Q-LR
Center Distance (in)
1.75 1.75
Center Distance Range
1" thru 3.25"
Efficiency
80
Frame Size
56C
Gear Ratio
40:1
Gear Type
Worm
H-Tap size
5/16 - 18
Height
10.5
Housing Material
Cast Iron
HP Range
1/2 to 3/4 HP (< 1)
Input Bore (C Face)
0.625
Input Diameter (in)
0.625
Input HP @ 1750 RPM
0.52
Input Keyway (C Face)
3/16 X 3/32
Input RPM
1750
Input Speed
1750
Input Style
C-Face Quill
Length
10.69
Model
175Q
Mounting Type
No Base
No. of Gear Reductions
Single
Output Diameter (in)
0.875
Output Key
3/16 X 1.38
Output RPM
43.7
Output Shaft Assembly Code
D
Output Shaft Direction
Double
Output Shaft Orientation
LR
Output Torque Range
500 to 1000 in lbs
Output Torque Rating (in-lb)
634 in-lbs @1750 input RPM
Output Type
Solid Shaft
Overhung Load Rating (Output Shaft(lb))
740
Product Type
Worm Speed Reducer
Ratio Range
40:1
Reducer
Worm - Right Angle
Reducer Style
Standard
Series Code
Raider
Service Factor
1
Shaft Seal Material
Nitrile
TAP Depth
0.61
Thrust Rating - output shaft
1399
Width
9.06
Regal Beloit Morse 175Q56LR40
UPC: 662288343424 | UNSPSC: 25173800 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Morse® Raider® Plus Worm Gear Reducer, Single Reduction Standard, 40:1 Gear Ratio, 1 hp, C-Face Quilled Input, Left and Right Output, 5/8 in Dia Input, 7/8 in Dia x 2.05 in L Output, 43.7 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 21.97 in-lb Input/43.7 in-lb Output, 1-3/4 in Centre Distance, 3/16 x 3/32 in Input Keyway, 80 % Efficiency, Polyglycol Oil Lubrication, Direct/Floor Mount, Cast Iron, 7.33 in L x 6.78 in W x 5.75 in H
Features:
- Rugged cast iron housing provides maximum strength and dependability
- High lead angle worm is case hardened, ground and polished
- Large, single row ball bearings on input shaft to absorb radial and thrust loads at higher input speeds
- Tapered roller bearings are used on output shaft
- Forged bronze worm gears provide optimum balance of strength and wear
- Heavy duty tapered roller bearings on all output shafts
- 56C motor frame size
Specs:
- Input Maximum Speed: 1750 rpm
- Output Maximum Speed: 43.7 rpm
- Centre Distance: 1-3/4 in
- Input Type: C-Face Quilled
- Output Size: 7/8 in Dia x 2.05 in L
- Input Size: 5/8 in Dia
- Lubrication Type: Polyglycol Oil
- Efficiency: 80 %
- Torque Rating: 21.97 in-lb Input/43.7 in-lb Output
- Horsepower: 1 hp
- Keyway Size: 3/16 x 3/32 in Input
- Gear Ratio: 40:1
- Output Type: Left and Right
- Mounting Type: Direct/Floor
- Dimensions: 7.33 in L x 6.78 in W x 5.75 in H
- Material: Cast Iron
- Type: Single Reduction Standard
Certifications/Standards:
FDA Compliant
Warranty:
1 Year
#1771271
Brand
HubCity
Model
0270-07593
#1328946
Brand
Electra/Grove Gear
Model
GR8180140.00
#1758474
Brand
Boston Gear
Model
SSF7180B-40KC-B5-HS1
#151657
Brand
Dodge
Model
17A40LR56WP
#141847
Brand
Dodge
Model
17Q40LR56
#141780
Brand
Dodge
Model
17Q40LR56WP
#143038
Brand
Dodge
Model
17A40LR56
#6000047
Brand
Winsmith
Model
U1840SB56
| Brand | PIP |
| Model | 713KSSN/L |
| Brand | Bando |
| Model | 100-DS3M-810 |
| Brand | Dixon |
| Model | 12-DME-12 |
| Brand | TB Woods |
| Model | 4R3VX670 |
| Brand | Saginaw Control |
| Model | SCE-30EL2412SSLP |
| Brand | Starrett |
| Model | 25-441/5J W/SLC |
| Brand | Hubbell Wiring |
| Model | 02203013 |