We never sell your data to third parties
Dodge 202S18L TIGEAR-2 worm gear speed reducer with 18:1 ratio, 2.02" center distance, left side solid output shaft, separate belt-driven input, 795 in-lb output torque, 1.46 HP rating, cast iron housing. - Ratio: 18:1
- Center Distance: 2.02"
- Input: 0.625" Input Shaft
- Output Bore/Shaft Diameter: 1"
- Output: Left Side Solid Output Shaft
- Paint/Coating: Green
- Housing Material: Cast Iron
- Housing Material: Cast Iron
- Input Horse Power: 1.46
- Output Horse Power: 1.23
MODEL 202S18L
Contact supplier for technical support on: +1-864-284-5700
$910.30 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Base to output center height
2.2400 in, 56.896 mm
Case size
202
Center distance (in)
2.0000 in, 50.8 mm, Center distance (in):2.02 in
Center to end of shaft distance
6.6900 in, 169.926 mm
Horsepower rating input
1.4600 hp, 1.089 kW
Horsepower rating output
1.2300 hp, 0.917 kW
Housing material
Cast iron
Input
0.625 in Input Shaft
Input HP
1.46
Input style
Separate
Lubrication type
PAG, standard temperature
Mounting bolt pattern length
5.0000 in, 127.0 mm
Mounting bolt pattern width
2.8800 in, 73.152 mm
Nominal ratio
18
Output
Left side solid output shaft
Output bore/shaft diameter
1 in
Output horse power
1.23
Output shaft
Left (solid A)
Output style
Left
Overhung load
1560 lbf, 6939.226 N
Paint type
Standard
Paint/coating
Green
Rated torque output
795 in/lb, 795.0 in/lb
Ratio
18 to 1
Seal type
Single-lip contact
Shaft dia input
0.6250 in
Shaft diameter output
1.0000 in, 25.4 mm
Shaft length input
1.1500 in, 29.21 mm
Shaft length output
4.1100 in, 104.394 mm
Suitable for washdown
No
Thermal horsepower rating
2.1200 hp, 1.581 kW
- Product Type: TIGEAR-2 Worm Gear Speed Reducer
- Gear Ratio: 18:1 reduction ratio
- Center Distance: 2.02 inches
- Output Configuration: Left side solid shaft, 1.0000" diameter (25.4 mm)
- Input Type: Separate belt-driven input (no motor flange)
- Output Torque: 795 in-lb maximum
- HP Rating: 1.46 HP input capacity
- Housing: Cast iron construction with green paint finish
- Reduction Type: Double reduction worm gear train
- Weight: 37.5 lbs
- Applications: Belt conveyors, material handling, industrial drives requiring high torque at low speed
SKU: 117408
P90 coupler
These where a perfect match saved me time and money by getting them fro you guys
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read more
#143065
Brand
Dodge
Model
20S15R
#5004056
Brand
Dodge
Model
202S18L
#5004360
Brand
Dodge
Model
20S40LLT
#5004063
Brand
Dodge
Model
202S30R
#5004343
Brand
Dodge
Model
20S15LLT
| Brand | Reiff & Nestor |
| Model | 60843 |
| Brand | MRO Supply |
| Model | D211360 |
| Brand | Gates Rubber |
| Model | 5/BX140 |
SKU: 117408
P90 coupler
These where a perfect match saved me time and money by getting them fro you guys
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/