We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
RF760-40E-B11-G Worm GearboxRatio: 40:1 Single ReductionCenter Distance: 6"Input: 210TC FlangeOutput Bore/Shaft Diameter: 2.25"Output: Left Side Solid Output Shaft RF760-40E-B11-G Cast Iron Worm Gearbox
- Ratio: 40:1 Single Reduction
- Center Distance: 6"
- Input: 210TC Flange
- Output Bore/Shaft Diameter: 2.25"
- Output: Left Side Solid Output Shaft
MODEL RF760-40E-B11-G
Contact supplier for technical support on: 800-626-2120
$5,597.58 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bore/Shaft Diameter
2.25"
Center Distance
6"
Input Size
210TC
Input Type
Flange
Output Type
Solid Output Shaft
Ratio
40 to 1
Reduction
Single
Shaft Projection
Left Side
Product Features
- The 700 Series' large oil reservoir provides efficient heat dissipation and lubrication for longer operating life.
- Its multi-position mounting flexibility allows for installation in virtually any position.
- Housings are straddle-milled, top and bottom, for precise alignment of horizontal and vertical bases.
- Internal baffles assure positive, leak-free venting.
- The 700 Series' rugged housing, fabricated of fine-grained, gear-quality cast iron, provides maximum strength for maximum durability, as well as greater precision during worm and gear alignment.
- Boston Gear's 700 Series high-strength bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and overhung load capacities, sizes 713-760.
- 700 Series' high-strength steel output shaft assures capacity for high torque and overhung loads.
- Pipe plugs allow easy fill, level, and drain in any mounting position.
- The 700 Series' super-finished oil-seal diameters on both input and output shafts extend seal life.
Specifications
- 11 basic single reduction sizes
- 8 basic double reduction sizes
- 1/6 - 25 HP
- 5:1 - 100:1 ratios single reduction
- 100:1 - 3600:1 ratios double reduction
- Non-flanged, NEMA C-face quill, and coupled input styles
- Projecting and hollow output shafts
- Projecting diameters from 1/2" to 2-1/4"
SKU: 42637
Shaft output is reversible
Description should say that shaft is reversible. Other than that perfect fit. Good communication from the shipping folks.
Read moreSKU: 34774
Quality
very high quality. using these gears in a model 9 cylinder radial engine with a 1" bore. about 8 h.p. , for oil pump a scavenge pump timing gears and distributor . very good quality gears.
Read moreSKU: 38771
Gear box oil
This has been very hard to find. It’s the oil spec’ed for my 1950s Rockwell wedge bed planer gear box. I haven’t found it anyplace else.
Read more
| Brand | Koyo Bearing |
| Model | 6012 ZZNR |
| Brand | Jason Industrial |
| Model | 3/8V1320 |
| Brand | Bando |
| Model | TB229 |
| Brand | Timken Belts |
| Model | R8V1250-4 |
| Brand | AMI Bearings |
| Model | UKP313+HA2313 |
SKU: 42637
Shaft output is reversible
Description should say that shaft is reversible. Other than that perfect fit. Good communication from the shipping folks.
Read moreSKU: 34774
Quality
very high quality. using these gears in a model 9 cylinder radial engine with a 1" bore. about 8 h.p. , for oil pump a scavenge pump timing gears and distributor . very good quality gears.
Read moreSKU: 38771
Gear box oil
This has been very hard to find. It’s the oil spec’ed for my 1950s Rockwell wedge bed planer gear box. I haven’t found it anyplace else.
Read moreItem must be unused.
Item must be in it's original package.
25% Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/