Categories

Add products to your shopping cart

#351067

P6420M115

Image for Illustration purposes only. Actual product may vary

  • Brand:
  • Model: P6420M115
  • Condition: NEW
  • SKU: 351067

TBWOODS P6420M115 P64-20M-115-J SYNCH SPROCK

View additional description
  • Typically ships in: 1 day
  • Weight: 104.0 lb
  • Contact supplier for technical support on: 888-829-6637

$1,520.26 Each

Select Quantity

Unit of measure: each

Returnable: See conditions

Payment methods:

Additional Description

Specifications
UPC698672596206
Unit Of MeasureEnglish
FamilySynchronous Plus
Material TypeCI
Belt Width mm115
BushingJ
Const TypeW
DescriptionP64-20M-115-J
Face Width in5.38
Family ID2,004
Family NameSynchronous Sprockets
Hub Diameter in8.00
Hub Length in3.190
Hub Location1.19
Inertia WR226.500
Inside Diameter in14.06
Number Of Teeth64
OD Outside Diameter in15.87
Pitch Diameter in16.04
Pitch M20mm
Rim Face5.37500
Rim ID14.06
RPM Upper Limit1,580
Section 0120M
Tooth Pitch Frac in20.000000
Torque Limit55,000
Weight lbs104
Wr2 lbs ft226.50
Reviews

Didn’t use yet

I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.

Read more

Return policy

Disclaimer: The return policy information shown below is merely a copy of the text as stated in TB Wood's Terms and Conditions.

File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Terms%20and%20Conditions.html

3. Claims for refunds or replacements must be made to the factory. Products may be returned only after written approval and a returned goods authorization number has been received from Customer Service or Application Engineering. Return shipments must be prepaid (Refer to Returned Goods Policy). Final decision about refund or replacement rests solely with TB Wood's Incorporated. 

--

Disclaimer: The return policy featured below is for distributors only. Also, it is merely a copy of the text from TB Wood's Distributor Policy and Procedures.

File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Distributor%20Policies%20and%20Procedures.pdf

Returned Goods
The policy for returning products for defects in workmanship or materials is covered under the “Product Reliability” section.

Distributors and, occasionally, OEMs may want to return products that are overstocked or slow moving. Prior approval and a returned goods authorization number must be obtained from Customer Service or Application Engineering. This number must be referenced on the returned goods shipment. It allows us to identify the contents of the shipment, the Distributor who originated it and the reason for return. Freight must be prepaid. 

Products returned for reasons other than factory authorized stock adjustments must have approval from Customer Service or Application Engineering and a returned goods authorization number. They must be sent by prepaid freight and will be subject to a 15% restocking charge. There will be additional charges as necessary for re-boxing and refurbishing. Returned goods must have been manufactured and/or sold by TB Wood’s Incorporated and must be in salable condition. They will be inspected at the factory and if reconditioning is necessary it will be charged to the Distributor. We reserve the right to reject unsalable products.

No products will be accepted for return or exchange if they are obsolete.

 

Product's availability

State of California Proposition 65 Product Warning