Image for Illustration purposes only. Actual product may vary

Jason Industrial 1790-5M-30 HTD timing belt with 5mm curvilinear pitch, 1790mm pitch length, and 30mm width. Neoprene body with fiberglass tension cords and nylon tooth-cover fabric for positive-engagement industrial drives.

Name: Jason Industrial 1790-5M-30 HTD timing belt with 5mm curvilinear pitch, 1790mm pitch length, and 30mm width. Neoprene body with fiberglass tension cor
Brand: Jason Industrial
Price: 96.2 USD
Availability: InStock
Rating: 4.75 (4 reviews)

MODEL 1790-5M-30

BRAND

Jason Industrial

SKU

2001145

UOM

each

Contact supplier for technical support on: 973 227 4904

$96.20 Each

Prices are subject to change

FREE SHIPPING ON ORDERS OVER $100

Select Quantity

GET A QUOTE

Typically Ships in: 1 day

Returnable: See conditions

The standard trapezoidal tooth timing belt design performs poorly in high-torque applications and high-power drives at lower speeds.

Among the advantages are:

• Higher torque transmission at low speeds

• High power transmission over a wide speed range

• Improved meshing to reduce tooth jump

• Higher resistance to tooth shear

• Less tooth wear due to friction

Non-standard lengths in 5mm, 8mm and 14mm pitch are also available, as are belts with 3mm pitch.

3M – 3mm HTB Synchronous Belts

Many lengths are in stock and can be cut to the desired width.

Features & Benefits

• Fiberglass Tensile Cord

• Chloroprene Belt Body

• Nylon Tooth Cover

Construction

Compound – Chloroprene

Cord – Fiberglass

Tooth Cover – Nylon

Applications – Drives requiring premium efficiency or synchronous operation and higher power capacity than trapezoidal timing belts.

Engineering Standards – Conforms to ARPM standard IP-27

Recommended Pulleys – Use pulleys made to ARPM standards

Non-Standard Lengths – Contact Jason/Megadyne

SKU: 1997736

Belt order

ALL WENT WELL FROM START TO FINISH...WILL USE THEM AGAIN.

SKU: 2003134

Exact same part

Great prices and fast shipping on a new HTB Jason/Megadyne belt. Exact replacement part.

SKU: 2000646

Belt

I order my belt in Jason and arrived in other brand

SKU: 1992919

Great product

The belt looked great , fast shipping,great product,great communication also

When will I be charged for my order?

Do you provide credit terms?

Can I get a discounted price? I am a reseller / government entity.

What is the return/warranty policy?

Can it be shipped today?

Does “Usually ships in 24 hours” mean it’s in stock?

Read full FAQ

Recently Viewed

#706158

Dodge 2MA50X1-1/8 light duty fixed bore V-belt sheave with 2-groove A/4L section design, 4.7" pitch diameter, and 1-1/8" finished bore. Cast iron construction rated for light duty applications. Direct shaft mounting without bushing required.

Brand	Dodge
Model	2MA50X1-1/8

$80.73 Each

Free shipping

#805720

AMI MUCF207-22NPRF four-bolt flange bearing unit with 1-3/8" (34.925mm) bore, set screw locking, and 304 cast stainless steel housing. Features 440C stainless steel insert for corrosive environments. Normal duty rating for industrial applications.

Brand	AMI Bearings
Model	MUCF207-22NPRF

$231.44 Each

Free Shipping orders over $100

#1387936

AMI UEPX11-35 medium duty pillow block bearing with 2-3/16" (55.563mm) bore, cast iron housing, and Accu-Loc concentric locking system. Chrome steel insert with wide inner ring for extended service life in industrial applications.

Brand	AMI Bearings
Model	UEPX11-35

$290.55 Each

Free Shipping orders over $100

#5074715

Timken 200851 small bore inch oil seal with NBR single lip and garter spring for consistent sealing pressure. Designed for shaft sealing in pumps, motors, and gearboxes using petroleum-based oils and greases. Standard industrial construction for reliable performance in general rotating equipment applications.

Brand	Timken
Model	200851

$40.52 Each

Free shipping

#678751

Bando SPB6000 Banflex SPB section metric V-belt with 6000mm effective length. Cross-section: 17mm top width x 13mm depth. Chloroprene rubber construction for industrial drives requiring reliable power transmission. Conforms to RMA IP-23 standards.

Brand	Bando
Model	SPB6000

$133.80 Each

Free Shipping orders over $100

#832111

TB Woods AX75 AX-section cogged V-belt with 77" outside length, 1/2" top width, and 5/16" depth. The cogged design provides increased flexibility and reduced bending resistance for applications requiring smaller pulley diameters. Suitable for fractional-horsepower drives.

Brand	TB Woods
Model	AX75

$43.00 Each

Free shipping

#17487

AMI KHLFL206 four-bolt flange bearing unit with 30mm bore diameter and eccentric collar locking mechanism. Cast iron housing with narrow inner ring width, chrome steel insert for normal duty applications.

Brand	AMI Bearings
Model	KHLFL206

$34.82 Each

Free shipping

#2561352

Belden UJ-1500 BOOT Universal Joint Boot Covers 2.0625in Long 2.25 Wide 1.5inID Nitrile (NBR)

Brand	Belden
Model	UJ-1500 BOOT

$22.52 Each

Reviews

SKU: 1997736

Belt order

ALL WENT WELL FROM START TO FINISH...WILL USE THEM AGAIN.

SKU: 2003134

Exact same part

Great prices and fast shipping on a new HTB Jason/Megadyne belt. Exact replacement part.

SKU: 2000646

Belt

I order my belt in Jason and arrived in other brand

SKU: 1992919

Great product

The belt looked great , fast shipping,great product,great communication also

Jason Industrial 1790-5M-30 HTD timing belt with 5mm curvilinear pitch, 1790mm pitch length, and 30mm width. Neoprene body with fiberglass tension cords and nylon tooth-cover fabric for positive-engagement industrial drives.

Return policy

Request specifications