Stop searching, install MROSupply Smart Check and see our price instantly wherever you browse.

Add products to your shopping cart

288-8MS-50

Image for Illustration purposes only. Actual product may vary

View in markdown

Jason Industrial 288-8MS-50 RPP Silver timing belt with 8mm pitch, 288mm pitch length, and 50mm width. The Rubber Parabolic Profile (RPP) design ensures smooth, quiet operation and high torque capacity for precision industrial drives.

MODEL 288-8MS-50

BRAND

Jason Industrial

SKU

2011757

UOM

each

Contact supplier for technical support on: 973 227 4904

$43.29 Each

Prices are subject to change

FREE SHIPPING ON ORDERS OVER $100

Select Quantity

GET A QUOTE

Typically Ships in: 1 day

Returnable: See conditions

The new Isoran RPP Silver Synchronous Belt is constructed with the highest quality material.

Isoran RPP Silver Synchronous Belts are specified by pitch length, tooth pitch and belt width in millimeters – Example: 1800-8MS-50

Features & Benefits

• Increased Load Capacity

• Drive Upgrade

• RPP Tooth Profile

• Reduced Noise

• Anti-Static Properties

Construction

Compound – Chloroprene

Cord – Fiberglass

Tooth Cover – Nylon

Applications – Drives requiring increased efficiency or synchronous operation and higher power capacity than standard RPP synchronous belts. General

Engineering Standards – conforms to ARPM IP-27 and ISO 13050 standards

Recommended Pulleys – Use pulleys made to ARPM or ISO 13050 standards

SKU: 1997736

Belt order

ALL WENT WELL FROM START TO FINISH...WILL USE THEM AGAIN.

SKU: 2000646

Belt

I order my belt in Jason and arrived in other brand

SKU: 1992919

Great product

The belt looked great , fast shipping,great product,great communication also

SKU: 1992482

Consistent good service

MRO has consistent outstanding service with number one telephone support which are a rarity these days.

When will I be charged for my order?

Do you provide credit terms?

Can I get a discounted price? I am a reseller / government entity.

What is the return/warranty policy?

Can it be shipped today?

Does “Usually ships in 24 hours” mean it’s in stock?

Recently Viewed

#862676

GE35ES2RS

IKO Bearing GE35ES2RS Spherical Bushing, Metric, High Carbon Steel, Steel on Steel, With Seals

Brand	IKO Bearing
Model	GE35ES2RS

$60.43 Each

Free shipping

#16233

UCP205-14C4HR5

AMI UCP205-14C4HR5 200 series normal duty pillow block bearing with 7/8" (22.225mm) bore, set screw locking, and wide inner ring chrome steel insert. Cast iron housing rated for high temperature operation up to 400°F. Suitable for applications requiring reliable performance in elevated thermal environments.

Brand	AMI Bearings
Model	UCP205-14C4HR5

$55.41 Each

Free shipping

#5074998

472018

Timken 472018 small bore inch oil seal with double lip configuration and garter spring, constructed from NBR (nitrile/Buna-N) material. Provides enhanced sealing for fluid retention and contamination exclusion in industrial applications. Suitable for standard operating temperatures from -40°F to +250°F. Intended for use in pumps, gearboxes, and general machinery requiring reliable shaft sealing.

Brand	Timken
Model	472018

$13.80 Each

Free shipping

#5075115

410867N

Timken 410867N small bore inch oil seal with nitrile (NBR) single lip and garter spring for positive shaft sealing. Standard-duty design for pumps, motors, and general industrial equipment. Operating range -40°F to +250°F, suitable for petroleum oils and water.

Brand	Timken
Model	410867N

$27.71 Each

Free shipping

#263227

50BTB17H

Martin 50BTB17H Taper-Lock sprocket for #50 roller chain, 5/8" pitch, 17 teeth, 3.718" outside diameter. Steel construction with hardened teeth for extended wear life. Requires a 1610 series Taper-Lock bushing (sold separately).

Brand	Martin Sprocket
Model	50BTB17H

$71.81 Each

Free shipping

#1154894

1756-TBCH

Allen-Bradley 1756-TBCH 36-point terminal base for ControlLogix analog input modules, providing wiring interface for 16-point analog input modules with wire arm for cable management and screw terminal connections. This Bulletin 1756 accessory mounts on DIN rail and ensures reliable field termination for industrial automation I/O systems.

Brand	Allen Bradley
Model	1756-TBCH

$226.07 Each

Free Shipping orders over $100

#5100758

UC204

Timken UC204 wide inner ring ball bearing insert for UC-series mounted units. 0.787 inch cylindrical bore, 1.850 inch outside diameter, 1.220 inch inner ring width, 0.630 inch outer ring width. Dynamic load rating 2,878 lbf, static load rating 1,495 lbf. Two M6×0.75 setscrews at 120° for secure shaft locking. Bearing steel construction. Fits pillow block, flange, and take-up housings for conveyors, fans, and light-duty machinery.

Brand	Timken
Model	UC204

$26.51 Each

Free shipping

#507514

10408411

Rex ZA2307 2000 series normal duty mounted spherical roller bearing in a cast iron fixed 2-bolt pillow block housing. Features a 3-7/16 in (87.31 mm) bore, single setscrew locking collar, and standard clearance seal. Designed for moderate load applications requiring self-alignment.

Brand	Rexnord
Model	10408411

$1,291.56 Each

Free Shipping orders over $100

Reviews

SKU: 1997736

Belt order

ALL WENT WELL FROM START TO FINISH...WILL USE THEM AGAIN.

SKU: 2000646

Belt

I order my belt in Jason and arrived in other brand

SKU: 1992919

Great product

The belt looked great , fast shipping,great product,great communication also

SKU: 1992482

Consistent good service

MRO has consistent outstanding service with number one telephone support which are a rarity these days.