MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
Gates 92520374 TP597-3M-09 PowerGrip HTD Twin Power Belts - Pitch: 3mm
- Width: 9mm
- Pitch Length: 597mm
- Number of Teeth: 199
- Material ID: 92520374
Gates PowerGrip HTD Twin Power synchronous belts are designed to perform at high speeds and in extreme temperatures, with a larger tooth profile for increased performance capacity. They have nylon facing on both tooth sides to provide equal high load carrying capabilities between the sides.
- Fiberglass tensile cords provide high strength durability, excellent flex life, and high resistance to elongation.
- Neoprene body resists against wear from grime, grease, oil, and moisture.
MODEL TP597-3M-09
This vendor has a minimum order quantity of 4. Order minimum ($) may be applied. Add desired QTY to cart and proceed to checkout to view minimum
Contact supplier for technical support on: 303-744-5800
$38.61 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Brand Minimum Order Quantity: 4
Typically Ships in: 1 day
Returnable: See conditions
Belt Back Side
Notched
Belt Height (in)
0.12
Color
Black
End
Endless
Fabric Material
Nylon Teeth
Length (mm)
597
Material
Neoprene
Number of Teeth
199
Pitch (in)
0.118
Pitch length (in)
23.5
Reinforced Material
Fiberglass
Section
3M
Series
9252
Sprocket Comptab
PowerGrip GT
Standard Width
YES
Static Conductive
No
Temperature Range
-30 to 100 deg C
Tooth Profile
Curvilinear
Type
Double Sided
Width (in)
0.354
Gates PowerGrip HTD Twin Power synchronous belts are designed to perform at high speeds and in extreme temperatures, with a larger tooth profile for increased performance capacity. They have nylon facing on both tooth sides to provide equal high load carrying capabilities between the sides.
- Fiberglass tensile cords provide high strength durability, excellent flex life, and high resistance to elongation.
- Neoprene body resists against wear from grime, grease, oil, and moisture.
- Temperature Range: -30°C to +100°C (-22°F to +212°F).
A VERSATILE SOLUTION.
PowerGrip HTD Twin Power Timing Belts improve operations for a range of applications, including data storage equipment, hand power tools, postage handling, food processors, office machines, centrifuges, money handling, medical diagnostic, sewing machines, ticket dispensers, robotics, vending machines, vacuum cleaners, and so much more.
Features and Benefits
- Runs quieter than roller chain drives and eliminates lubrication and re-tensioning to reduce maintenance and labor.
- Nylon tooth facing provides a durable wear surface to improve service life.
- 30% increase in horsepower ratings compared to traditional timing belts.
- Transmits up to 100% of its maximum rated load from either side of the belt.
- Wear resistant nylon fabric on both tooth sides.
- High loading capacity.
- Non-slip positive drive.
- Running at low noise.
- Perfect fit on HTD profile pulleys.
- Available in 5M pitch.
MAXIMUM CAPACITY.
Get more out of your belts with Twin Power, which puts teeth on both sides of the belt. This ergonomic design increases both working capacity and belt lifetime, and gives equal working capacity to both driving surfaces.
SKU: 2788490
Great service!
I needed a hydraulic pump belt and found it at MRO Supply. Great prices and fast shipping, will order again. Thank you very much!
Read moreSKU: 1245113
Great belts
Bought these for my lathe. They are much better made than the original. MROSupply charges a very competitive price and the packaging and shipping speed was great.
Read moreSKU: 5932890
Gt4 cog belt
I've not had a chance to try it out but if it's at least as good as the 150 hours I had on the GT2 belt when I decided to replace it, I'll be a happy camper!
Read more
| Brand | Fasco |
| Model | KIT 102 |
| Brand | Dixon |
| Model | C08-02M |
| Brand | Electra/Grove Gear |
| Model | S8772455.00 |
| Brand | Allen Bradley |
| Model | 1336S-B020-AN-EN5-HA2-L4 |
| Brand | Martin Sprocket |
| Model | P348M30-SH |
| Brand | Littelfuse |
| Model | 10E1CL5.5 |
| Brand | StrongHold |
| Model | DC-15314 |
| Brand | Hubbell Wiring |
| Model | PC12D |
SKU: 2788490
Great service!
I needed a hydraulic pump belt and found it at MRO Supply. Great prices and fast shipping, will order again. Thank you very much!
Read moreSKU: 1245113
Great belts
Bought these for my lathe. They are much better made than the original. MROSupply charges a very competitive price and the packaging and shipping speed was great.
Read moreSKU: 5932890
Gt4 cog belt
I've not had a chance to try it out but if it's at least as good as the 150 hours I had on the GT2 belt when I decided to replace it, I'll be a happy camper!
Read moreIn order to be eligible for a return, product to be returned must be at least $150 US. Items must be unused and unmounted, in resalable condition. Return authorization must be requested, no credit or exchanges will be granted if items are shipped back without return authorization or if items are not in resalable condition. Re-stocking fee is $60 US flat, cannot be voided if placing an off-setting order. Made To Order items are Non-Returnable and Non-Cancellable.