MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
Gates 92462119 TP600L050 PowerGrip Twin Power Timing Belts - Pitch: 3/8" (.375"/L)
- Width: 1/2"
- Pitch Length: 60.00"
- Number of Teeth: 160
- Material ID: 92462119
Gates PowerGrip Twin Power Timing Belts are suitable for all industrial serpentine applications that require rotation reversal in some driven shafts. Twin Power belts have precision-formed elastomeric teeth on both sides to provide high-loading capacity synchronisation from both driving surfaces. Due to its double and directly opposite teeth, Twin Power synchronous belts ensure high loading capacity on contra-rotating drives and ensure smooth running and high ?exibility. Gates PowerGrip Twin Power belts are designed to perform at high speeds and in extreme temperatures, with a larger tooth profile for increased performance capacity.
- Fibreglass tensile cord provides high strength, excellent flex life, and high resistance to elongation.
- Neoprene body provides protection against grime, grease, oil and moisture.
- Belt capacity is equal to standard single-sided PowerGrip timing belts.
MODEL TP600L050
This vendor has a minimum order quantity of 2. Order minimum ($) may be applied. Add desired QTY to cart and proceed to checkout to view minimum
Contact supplier for technical support on: 303-744-5800
$73.10 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Brand Minimum Order Quantity: 2
Typically Ships in: 1 day
Returnable: See conditions
Belt Back Side
Notched
Belt Height (in)
0.2
Color
Black
End
Endless
Fabric Material
Nylon Teeth
Length (in)
60
Material
Neoprene
Minimum Pulley Diameter
2.83 in
Number of Teeth
160
Pitch (in)
0.375
Pitch length (in)
60
Reinforced Material
Fiberglass
Section
L
Series
9246
Sided
Double Sided
Sprocket Comptab
PowerGrip GT
Standard Width
YES
Static Conductive
No
Temperature Range
-30 to 180 deg F
Tooth Profile
Trapezoidal Design
Type
Light
Width (in)
0.5
Gates PowerGrip Twin Power Timing Belts are suitable for all industrial serpentine applications that require rotation reversal in some driven shafts. Twin Power belts have precision-formed elastomeric teeth on both sides to provide high-loading capacity synchronization from both driving surfaces. Due to its double and directly opposite teeth, Twin Power synchronous belts ensure high loading capacity on contra-rotating drives and ensure smooth running and high flexibility. Gates PowerGrip Twin Power belts are designed to perform at high speeds and in extreme temperatures, with a larger tooth profile for increased performance capacity.
- Fiberglass tensile cord provides high strength, excellent flex life, and high resistance to elongation.
- Neoprene body provides protection against grime, grease, oil, and moisture.
- Belt capacity is equal to standard single-sided PowerGrip timing belts.
WE'RE TAKING DOWN DOWNTIME.
Gates PowerGrip Twin Power Belts run quieter than roller chain drives and eliminate the need for lubrication and re-tensioning to reduce maintenance, downtime and labor in your operations.
Features and Benefits
- Gates Twin Power belts have nylon facing on both tooth surfaces to provide equal load carrying capabilities on either side of belt.
- Wear resistant nylon fabric on both tooth sides to provide equal load carrying capabilities on either side of belt.
- Temperature Range: -30°C to +100°C (-22°F to +212°F).
- Precision formed elastomeric teeth and body.
- Free of lubrication and maintenance.
- High efficiency, non-slip positive drive.
- High tooth jump resistance.
- Available in XL, L, H pitch.
GIVE YOUR APPLICATIONS 100% ON BOTH SIDES, WITHOUT COMPROMISE.
Twin Power can transmit up to 100% of its maximum rated load from either side of the belt; alternatively, it can transmit a load on both sides – provided the sum of the loads does not exceed the maximum capacity.
SKU: 177444
Mechanic
Cut the bell when you said I would get a chance to install it seems to fit I still need to test drive
Read moreSKU: 2788490
Great service!
I needed a hydraulic pump belt and found it at MRO Supply. Great prices and fast shipping, will order again. Thank you very much!
Read moreSKU: 183305
Great deal
Very good customer service, great prices and super fast shipping!!! Will buy again!!
Read moreSKU: 1245113
Great belts
Bought these for my lathe. They are much better made than the original. MROSupply charges a very competitive price and the packaging and shipping speed was great.
Read more
| Brand | Martin Sprocket |
| Model | C20168 |
| Brand | Dixon |
| Model | 12VDP-A |
| Brand | Brook Crompton |
| Model | BA4N005V4BRK |
| Brand | Dixon |
| Model | 2EM2-B |
| Brand | PTI |
| Model | M1A90 |
| Brand | Champion |
| Model | X1-5 |
| Brand | HubCity |
| Model | 0270-03178 |
| Brand | HubCity |
| Model | 0270-03005 |
SKU: 177444
Mechanic
Cut the bell when you said I would get a chance to install it seems to fit I still need to test drive
Read moreSKU: 2788490
Great service!
I needed a hydraulic pump belt and found it at MRO Supply. Great prices and fast shipping, will order again. Thank you very much!
Read moreSKU: 183305
Great deal
Very good customer service, great prices and super fast shipping!!! Will buy again!!
Read moreSKU: 1245113
Great belts
Bought these for my lathe. They are much better made than the original. MROSupply charges a very competitive price and the packaging and shipping speed was great.
Read moreIn order to be eligible for a return, product to be returned must be at least $150 US. Items must be unused and unmounted, in resalable condition. Return authorization must be requested, no credit or exchanges will be granted if items are shipped back without return authorization or if items are not in resalable condition. Re-stocking fee is $60 US flat, cannot be voided if placing an off-setting order. Made To Order items are Non-Returnable and Non-Cancellable.