Stop searching, install MROSupply Smart Check and see our price instantly wherever you browse.

Add products to your shopping cart

1096528

Image for Illustration purposes only. Actual product may vary

View in markdown

Browning 210L075 1096528 56-tooth L-pitch timing belt pulley with a 0.375-inch pitch and 0.75-inch face width. Steel construction for synchronous belt drives requiring no-slip power transmission. Compatible with Browning L-section gearbelts for industrial motion-control and conveyor applications.

MODEL 1096528

BRAND

SKU

2281861

WEIGHT

0.100 lb

UOM

each

UPC

662289269068

Contact supplier for technical support on: 800-626-2120

$72.23 Each

Prices are subject to change

FREE SHIPPING ON ORDERS OVER $100

Select Quantity

GET A QUOTE

Typically Ships in: 1 day

Returnable:No

Height

0.8

Length

7.3

Material

Neoprene

Pitch

9.525 mm

Product type

Gearbelt

Width

5.85

Molded Teeth - Shear resistance teeth designed to provide smooth positive engagement with gearbelt pulleys.
High Tensile Cord - Specially treated cords to provide strength and additional flex life while providing resistance to elongation for the belt.
Compression Section - Bonds to belt cords for protections against dirt, grease, oil, ozone, and other environmental hazards.

Instruction Sheet

SKU: 2278827

Drive belts for compressor

Looked online for the original (Browning) same brand of belts I have used prior for my compressor and found them at MRO for a very god price and in stock. Shipping was free and they arrived in 4-5 days by regular freight. Great job.

SKU: 2286126

Pulley

Good price and delivered in a timely matter. Great job!

SKU: 2283405

Maintenance supervisor

great prices and fast delivery

SKU: 2282815

Browning taper bushing

Fits perfect.

When will I be charged for my order?

Do you provide credit terms?

Can I get a discounted price? I am a reseller / government entity.

What is the return/warranty policy?

Can it be shipped today?

Does “Usually ships in 24 hours” mean it’s in stock?

Recently Viewed

#5062426

4520-2

Timken 4520-2 precision Class 3 (ABEC 5 equivalent) tapered roller bearing cup with under 4-inch outside diameter. This single cup component pairs with a matching cone for a complete bearing assembly in gearboxes, pump shafts, and industrial machinery requiring high precision and load capacity.

Brand	Timken
Model	4520-2

$295.69 Each

Free Shipping orders over $100

#5077637

33821-3

Timken 33821-3 is a precision tapered roller bearing cup (outer ring) with a Class 3 (ABEC 5 equivalent) precision rating, designed for applications requiring high accuracy and reduced runout. This single cup is part of the 33800 series and falls within the under 4-inch outside diameter size class. It is engineered for use in precision gearboxes, pump shafts, and industrial machinery where exact cone and cup matching is critical for performance and longevity.

Brand	Timken
Model	33821-3

$188.38 Each

Free Shipping orders over $100

#2935152

ST8-SKIT

Dixon ST8-SKIT is a seal kit for ST-Series heavy duty quick couplings. Constructed with nitrile seals, this kit provides reliable performance in industrial fluid transfer applications. Designed for use with Dixon ST-Series couplers and plugs.

Brand	Dixon
Model	ST8-SKIT

$6.29 Each

Free shipping

#96710326

HD12B026-0400LXP2EES

Thomson Linear HD12B026-0400LXP2EES Electrak HD linear actuator, 12 Vdc, 2600 N (585 lbf) force, 400 mm stroke, 32 mm/s full load travel rate. Includes low-level signal motor switching, analog potentiometer position output, and EXX control. Cable length 1500 mm with flying leads, adapter at 0°.

Brand	Thomson Linear
Model	HD12B026-0400LXP2EES

$1,150.40 Each

Free Shipping orders over $100

#96816997

WE0732HJ

Goulds WE0732HJ is a submersible effluent pump rated at 3/4 HP, three-phase, 230V. It features a 4.06" impeller and draws 5.4 maximum amps. Designed for septic system effluent, basement dewatering, and light wastewater applications.

Brand	Goulds
Model	WE0732HJ

$2,109.64 Each

Free Shipping orders over $100

#5085848

24060-6363

Timken 24060-6363 is a high-performance PTFE (Teflon) single lip oil seal designed for demanding industrial applications. This seal offers superior chemical resistance and a wide operating temperature range from -100°F to +450°F, suitable for high-speed shafts and dry-running conditions. Its construction provides excellent sealing in harsh environments where conventional elastomers may fail.

Brand	Timken
Model	24060-6363

$523.04 Each

Free Shipping orders over $100

#5061899

394AS-2

Timken 394AS-2 is a single tapered roller bearing cup (outer ring) with a 4-8 inch outside diameter size class and a -2 precision suffix, indicating Class 3 (ABEC 5) precision. This cup is designed to be paired with a matched cone to form a complete tapered roller bearing assembly for applications requiring high precision and load capacity, such as industrial gearboxes, pump shafts, and machine tool spindles. The cup is part of the Timken 394 series.

Brand	Timken
Model	394AS-2

$31.97 Each

Free shipping

#5072889

NP423135-2

Timken NP423135-2 is a tapered roller bearing cup (outer ring) from the Power-Dense series, designed for high-load capacity in a compact envelope. This cup is part of a precision Class 3 (ABEC 5) assembly, intended for matched pairing with a corresponding cone to create a complete bearing set.

Brand	Timken
Model	NP423135-2

$60.23 Each

Free shipping

Reviews

SKU: 2278827

Drive belts for compressor

Looked online for the original (Browning) same brand of belts I have used prior for my compressor and found them at MRO for a very god price and in stock. Shipping was free and they arrived in 4-5 days by regular freight. Great job.

SKU: 2286126

Pulley

Good price and delivered in a timely matter. Great job!

SKU: 2283405

Maintenance supervisor

great prices and fast delivery

SKU: 2282815

Browning taper bushing

Fits perfect.