MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
WEG SSW060412T2257ESZ SSW06 412A230-575V w/AC1 BYP Soft Starter
MODEL SSW060412T2257ESZ
Contact supplier for technical support on: 800-ASK-4WEG
$6,152.25 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Current limit
No
Current limitation ramp
Yes
Direct on line start
No
Enclosure
IP00
Frame
5
Inside delta (6 leads)
Yes
Modbus-RTU RS-232
Yes
Modbus-RTU RS-485
Available with optional
Modbus-RTU USB
Yes
Parameterization via keypad
Yes
Parameterization via software
Superdrive G2
Parameterization via trimpots and dip switches
No
Power supply
220-575 V
Product certification
UL, CE, CS, IRAM and C-TICK
Pump control
Yes
Rated current
412 A
Soft PLC (ladder programming)
Yes, 1K bytes
Standard (3 leads)
Yes
Starting duty cycle
330
Starting regime (with ventilation kit)
No
Torque control
Yes
Voltage ramp
Yes
Voltage ramp and current limit
Yes
Soft-Starters are static starters that accelerate, decelerate and protect three-phase induction motors in power ratings from 2.2 to 1375 kW.
SSW06 Series Soft-Starter are static starters intended to accelerate, decelerate and protection of three phase induction motors. The control of the voltage applied to the motor by the means of the thyristors triggering angle variation, allows the soft-start to start and stop smoothly an electric motor.
With adequate adjustments of the variables, the torque produced is adjusted to the needs of the load, so the required current is going to be as low as possible for the starting procedure.
- Fault diagnosis, saving voltage, current and status of the soft-starter at the error occurrence
- Actuation of the programmable faults
- 32-bit, RISC type, high-performance microcontroller
- Full electronic motor protection
- Built-in electronic thermal relay
- Fully programmable control types
- Totally flexible torque control
- Kick start function to start loads with high static friction
- Switched electronics power supply with EMC filter (94 to 253 V AC)
- Monitoring of the electronics voltage, allowing backups of the motor thermal image values
- Protection against over and undervoltage on the motor
- Protection against voltage and current imbalance on the motor
- Protection against overload on the motor due to over and under: current, power or torque
- Elimination of mechanical shocks
- Great reduction of the stresses on the couplings and driving devices (gear boxes, pulleys, gears, belts, etc.)
- Longer lifespan of the motor and mechanical devices of the driven machine
- Easy operation, programming and maintenance via operating interface
- Simpler electrical installation
- Oriented start-up
- Possibility of standard connection (3 wires) or motor inside delta connection (6 wires)
- All the protections and functions are available in the two connection types (the only one available on the market)
- Three braking methods to stop the motor and the load more quickly, with or without contactor
| Brand | Schunk |
| Model | 421004 |
| Brand | Martin Sprocket |
| Model | S4-35IB-72-4 |
| Brand | Bestorq |
| Model | 560H150 |
| Brand | Allen Bradley |
| Model | 1398-DDM-030X |
| Brand | Koyo Bearing |
| Model | 5205 2RS |