MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
Telco Sensors SSR01-4-18235205H1D1-0.5-J8 Spacescan Receiver
MODEL SSR01-4-18235205H1D1-0.5-J8
$1,336.34 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
Active Height
1760 mm
Cable
8 x 0, 2 mm
Cable Sleeve
PVC 5, 9 mm
Channel Spacing
5 mm
Connection
0.5 m cable with 8 pin, M12 plug
Current Consumption
50 mA
Distance, Beams Pinch Point
2, 5 mm
Features
Cross/Parallel Beams Selectable and Blanking Function
Function
Receiver
Housing
33 x 36 mm
Housing Material, Front Lens
Polycarbonate
Housing Material, Profile
Aluminium (black anodised)
Length
1820 mm
Light Immunity
> 100 000 lux
Number of Channels
352
Number of Cross Scanning Beams
1054
Number of Parallel Beams
352
Operation Mode
Thru Beam
Operation Temperature
-30 to +60 C
Output
Solid State Relay
Output Indicator
Yellow LED
Output Rating
200 mA
Output Status
N.C.
Power On Indicator
Green LED
Profile Dimensions (w x d)
33 x 36 mm
Response Time
Beams: Parallel 44, 2 ms / Cross 128, 5 ms
Reverse Polarity Protected
Yes
Sealing Class
IP 67
Sensing Range
4 m
Shock
30 g
Short Circuit Protected
Yes
Storage Temperature
-40 to +80 C
Supply Voltage
12 - 30 V dc
System Status Indicator
Red LED
Vibration
10 - 55 Hz, 0, 5 mm
The SS 01 series is a light curtain system which consists of a selfcontained transmitter SST and receiver SSR, which are to be positioned opposite of each other. The detectors are housed in a sturdy aluminium profile (33 x 36 mm) with T-slot mounting rail, available in lengths ranging from 160 mm to 1980 mm (longer lengths available upon request). The series is available with a 12-30 V dc supply voltage with a solid state relay output, in light operated mode. The system is configurable to operate with either parallel or cross scanning beams which is selectable via a control input in the SSR. The SS 01 series features beam blanking function which is configurable using a second control input in the SSR to memorise the beams which are obstructed for up to 5 seconds during set-up. A test input in the SST may be used for either disabling or enabling the transmitting power temporarily for test purposes. The advanced automatic sensitivity adjustment ensures that no onsite set up or adjustments are required. The signal level of each individual channel is adjusted automatically, which compensates for misalignment and contamination during operation. The transmitter and receiver areelectrically synchronised by wire connection. The system is intended for static applications. Both the transmitter and receiver detectors are protected against reverse polarity of power supplies, control inputs and output signals. The output is also protected against short circuit and inductive loads. All products include a 3-year worldwide warranty.